|
Laboratory Dyeing Padders
Laboratory Dyeing Padder LDP
Bench top Model: Made in Hong Kong
Click to Enlarge
The laboratory padder is used for resin finishing
application of knitted and woven fabrics. The pressure and the
padder speed are adjustable per requirement.
Depending on the pressure
setting and the fabric specification, pick up values between 65 %
and 85 % can be reached. The 400 m wide padding mangle with 125 mm
diameter is made of NBR rubber and the machine is a solid and
compact table design made of stainless steel.
Laboratory padder for
resin finishing application of knitted and woven fabrics.
Designed specifically for dye padding
Features:
Horizontal type padder -
With safety device and
emergency hand and foot stop -
High reproducibility
-
High quality butadiene rubber specially for dyestuff impregnation
-
Protection Plate
-
Emergency Foot Stop
-
Padder Pressure: 0.1-0.8Mpa (1-8Bar)
-
Padder Length: 400mm
-
Padder Hardness: approx.70 - 75
ºA
-
Machine Weight: approx. 133kg
-
Dimensions: (W×D×H): 820mm×600mm×490mm
-
Voltage 220V AC. / 50Hz / 750W / 5A
-
UPC Speed Control (Option)
Auto Pad Lab Padder
Bench top Model: made in Pakistan
The laboratory padder is
used for resin finishing application of knitted and woven fabrics. The
pressure is adjustable and the padder Variable speed1 to 10 m/min.
Depending on the pressure
setting and the fabric specification. Rollers are made of NBR rubber
and the machine is a solid and compact table design made of stainless
steel.
Micro processor controlled
with control keys.
·
Perfect Pressure Control
·
Variable speed1 to 10 m/min
·
Pneumatic heavy duty Padder
·
Both vertical and horizontal
versions available
·
Two nip rollers of 5 inch dia and
16 inch length
·
70 ºA shore hardness
·
Direct digital control of fabric
speed variable from 0.1 to 10.0 m/min
·
Variable nip pressure with gauge
readout
·
Easy and automatic operation with
Robotics™ LP controller
·
Dual line LCD display showing
machine status and alarms
·
Auto power off for power saving
(10min Timer)
|
