|
Floor Standing Model:
Laboratory Dying Mangle
Used for the printing & dyeing industry to pad subsamples, and
applies to cotton, T/C and other fabrics.
Special Features:
1.The left or right side
pressure of padding roller can be independently adjustable to the
required one.
2.Easy to operate once
you set the required padding nip pressure no other re-adjustment
will be needed.
3.Safety devices include
a fabric feeder, safety rod. Emergency button and a knee pedal to
make sure the safe operations at every test.
4.Step and hand operated
switching modes safe and convenient. Stainless steel housing made
of imported material. Left and right pressures are independently
adjustable. Pick-up 25% to 110%. Applicable for various fabrics.
Technical Data:
Rubber length:
420mm
Rubber roller:
φ130mm
Rubber material:
70°shore
hardness
Pick-up:
25%~110%
Power supply:
380W/220V,
50HZ
Dimensions(mm):
710×760×1220mm
Net Weight: 200kg
Auto Pad Lab Padder
Bench top Model: made in Pakistan
Click
to Enlarge
The laboratory padder is used for resin finishing application of
knitted and woven fabrics. The pressure is adjustable and the padder
Variable speed1 to 10 m/min.
Depending on the pressure setting and the fabric specification.
Rollers are made of NBR rubber and the machine is a solid and
compact table design made of stainless steel.
Micro processor controlled with control keys.
·
Perfect Pressure Control
·
Variable speed1 to 10 m/min
·
Pneumatic heavy duty Padder
·
Both vertical and horizontal versions available
·
Two nip rollers of 5 inch dia and 16 inch length
·
70 ºA shore hardness
·
Direct digital control of fabric speed variable from 0.1 to
10.0 m/min
·
Variable nip pressure with gauge readout
·
Easy and automatic operation with Robotics™ LP controller
·
Dual line LCD display showing machine status and alarms
·
Auto power off for power saving (10min Timer)
For more information please contact us.
|
