8 results

  • Sort by
    ...
  • 01 Tensile Strength Tester $4,100.00

    Introduction :

     It is applicable in testing the rubber ,plastic film ,cable , fabric , paper ,aluminum board and so on , It can do the test of tensile, compression elongation ratio test, hot seal strength, tearing strength, 180 degree peel (include T peel), and 90 degree peel ,etc .

    Standard : according to GB , ISO , ASTM , DIN etc.

    Character :

    1. Auto controlled, High performance governor system
    2. Software : Micro-computer and professional software controls, LCD displays data ,results, such as max force, elongation…etc, could get max, min, average for testing results.
    3. High performance ball screw transmission and Servo motor to make the machine running quietly
    4. The limiter can ideally protect the equipment
    5. The result can be statistical and printed automatically
    6. Thermal printer ,high speed and no raise

    Technical Parameter :

    Load cell : 100N, 200N, 500N, 1000N, 2000N, 5000N (Select One)

    Type : Single Arm

    Crosshead travel approx: 1000mm

    Tensile and Compression Space: 800mm

    Strength Precision : 1% of applied value , from 2%-100% of the load cell capacity .

    Speed : 0.1mm/min – 500mm/min

    The accuracy of speed : ≤1%

    Resolution of the replacement: 0.01mm

    Strength Resolution : 1/100000

    Power : 220V±10V 50HZ

    Dimension: 520×380×1900mm

    Weight: 110kgs

  • 01-5000 N Tensile Strength Tester $5,500.00

    Introduction :

    This Tensile Strength Tester is applicable in testing the rubber, plastic film, cable, fabric, paper, aluminum board and so on . It is ideal for high-capacity tension, compression, bend/flex, and shear testing, these machines are guaranteed to meet the relative requirements of ISO, ASTM, JIN, GB and many other testing standards.

    Character :

    1.  Auto controlled, High performance governor system
    2.  Full open parameter setting
    3.  Software : Micro-computer and professional software controls, LCD displays data ,results, could store many test results.
    4. High performance ball screw transmission and Servo motor system to make the machine running quietly
    5. The test speed can be set automatically
    6. The limiter can ideally protect the equipment, Stop when over load
    7. The result can be statistical automatically
    8. Automatically judge the test over, l after break, automatically returns to initial set distance
    9. Can display real time curve
    10. With the protective function of overload, over current, over voltage, displacement upper and lower limitation and emergency stop.
    11. Mini Printer

    Technical Parameter :

    Load cell :5000N

    Measurement range: 2%-100% (100N-5000N)

    Type : Single Arm

    Tensile Space: 600mm(The distance between upper clamp and lower clamp)

    Strength Precision : 1% of applied value

    Speed : 0.1mm/min – 500mm/min

    The accuracy of speed : ≤1%

    Resolution of the replacement: better than 0.01mm

    Strength Resolution : 1/100000

    Power : 220V±10V 50HZ, single phrase

    Dimension: 520×380×1450mm

    Weight: 110kgs

  • Auto Single Yarn Strength Tester $11,250.00

    Yarn Strength Testing Machine is used to determine the breaking load and elongation of single yarns, core-spun yarn, polyester filament.. etc.

    Standard: GB/T 391, GB/T 14344, ISO 2062, ATSM D2256, BS 1932, DIN 53842.1, DIN 53835.2…etc.

    Features:

    1. Working pattern: CRE principle, dual control, controlled by both computer and big color touch screen, professional software supports
    2. Large touch screen can record, browse detail results and print results by printer
    3. Fully programmable to give breaking load, elongation, CV% of load, elongation, stress, strain curve and tenacity values..etc.
    4. Time fixing tensile: 10s or 20s
    5. With memory function when power interrupt, and up to 999 tests on each sample
    6. The machine adopts contact less relay, stable performance, reliable
    7. Gauge length and tension speed preset
    8. Able to set pretension force
    9. Use American imported load cell, Servo system control, low friction ball bearing screw
    10. Automatic zero-setting after each test.
    11. Force and elongation can be measured at any point of the curve
    12. Force reading can be selected either in Newton or gram
    13. Elongation reading can be selected either in or mm

    Technical parameters:

    Max measurement force:    6000CN

    Linear deviation :0.05%

    Resolution: 1CN

    Load cell accuracy class: 0.05%

    Gauge length: 250mm±1mm          500mm±1mm

    Pretension: 1cN-100cN

    Elongation: when at 250mm gauge length, max elongation is 220% when

    at 500mm gauge length, max elongation is 60% Accuracy: Within ±1% of

    applied force Tensile Speed: 50mm/min-5000mm/min

    Tex: 1-999.9 random setting

    Power: AC220V±10%      50Hz

    Dimension: 1295mm×550mm×450mm

    Weight: 100kg

  • Double Column Tensile Tester $6,687.00

    Introduction :

    Double Column Tensile Tester is a new generation of tester with innovative design, convenient using, excellent performance and pleasing appearance, this tester is special deigned in testing textile with Manual and Pneumatic grips (Customer option)

    Meet Standards:

    ISO13934.1, ISO13934.2, ISO13937.2, ISO9073.4, ISO13936.1, ISO13936.2, ISO13935.1, ISO13935.2, ISO 2062, ASTM D2256 ASTM D5034, ASTM D5035, ASTM D2261, ASTM D5587, ASTM D3936, ASTM D4964………………ETC.

    Test Function:
    Constant Speed Tensile Test
    Peeling Test
    Tearing Test
    Seam Slippage Test
    Bursting Test
    Definite Elongation Test Load Test
    Definite Load Test Elongation Test
    Elastic Recovery Test
    Yarn Strength Test

    Features:

    Working pattern: CRE principle, controlled by large LCD, equipped with an online interface, can be also controlled by computer with professional textile and yarn testing software., real time display graphs, breaking load, elongation, with PC powerful analysis system, also can give yield load, yield elongation, CV% of load…etc.
    Adopt imported sensor from American Tedea.
    AC servo drive system, ball screw, to do a wide range speed setting, suitable for all kinds of material mechanical performance testing.
    According to the customer need to provide a variety of standard test functions, can also be customized according to customer requirements. With different clamps can perform different test perfectly.
    All testing results and graphs can be output into Excel and be printed accordingly. With the protective function of overload, over current, over voltage, displacement upper and lower limitation, also with emergency stop.
    Multi Unit is selectable: CN, N, Lb, g, Kg, mm, Inch

    Panel of controller:

    Professional software support:

    Technical Parameter:
    Max Test Force: 5KN
    Precision of measurement strength : ±0.5% of the indicated load value
    Gauge Length: 25-500mm (adjustable)
    Jog speed: 2mm/min-1000mm/min
    Return speed: 2mm/min-1000mm/min
    Effective stroke: when gauge length is 100mm, the max elongation is 700%
    (700mm). Accuracy of position measurement: better than 0.1mm
    Machine stiffness: more than 28KN/mm
    Machine dimension:
    765×530×1700mm Power: 220V/110V,
    50Hz/60Hz Machine weight: 220kgs
    Standard Configuration: Textile Tensile Tester, Textile Tension Grips, Computer Software, Power Line, Calibration Weight
    Optional: other grips for other test (such as bursting test, tearing test, peeling test..etc)

  • Lea and Single Yarn Tester $3,100.00

    The 01Y electrical single-yarn tester is an ideal machine, which can test yarn’s breaking strength, elongation rate and other technology targets.

    The machine adopts testing principle of constant rate of elongation (CRE) and microcomputer to control, settle automatically and print data. It is programmed easily. And the tester is precise, fast and convenient. The machine has the function of protecting data in the machine when the power is lost. (It can memorize data when the power is lost suddenly).

    Standard: ISO2062, ASTM, BS, JIS, AS, CAN/CGSB.

    Technical Parameter:

    The max testing strength: 3000cN.

    Error of strength: <=+/-1%.

    Gauge between up and down gripper: 250mm+/-1mm, 500mm+/-1mm (It can be selected randomly.)

    Pre-tension’s scope: 1cN~100cN

    Constant breaking time: 20s+/-3s or 10s+/-1.5s (It can be selected randomly.)

    Constant stretching speed: 250mm/min+/-2% or 500mm/min+/-2%

    The scope of inputting parameters:

    ①    Linear density (yarn size): unit: Nm; inputting scope: 1~599.9

    ②    Test times of every group: 2~100

    ③    Group’s interval times of average value: 2~20

    ④    Data’s outputting mode: The machine uses LED to display value and

    statistic data of once or prints them in form style.

    Power: AC 220V+/-10% 50Hz

    Dimension: 320mmx360mmx1160mm

    Net weight: 38Kg

  • Servo Hydraulic Universal Testing Machine $6,687.00

    Introduction :

    Computer control hydraulic universal testing machine are widely used for tension, compression, bending, shear and wilding test of metal materials and also used for compression and bending test of nonmetal materials, such as cement, concrete and so on. Equipped with simple auxiliaries, it can be used for mechanical property testing of fastener, wire rope and components. They are perfect testing instrument project quality testing section, universities and colleges, research institution and industrial and mining enterprise.

    Meet Standards: ISO 7500/1 Class1, ASTM E4, BS 1610 Grade 1, DIN 51221 Class1

    Double testing space 4 steel guiding columns 2 high precision manufactured ball screw driving.

    Product Features:
    1. Control card adopts advanced neural adaptive PID control algorithm, and truly realizes three closed-loop digital control.
    2. Data acquisition system consists of or channels high precision A/D conversion channel. The maximum resolution of 1/300000. There is no subsection of all process.
    3. Select BB, AD and Xilinx original brand integrated devices and digital design.
    4. Built-in large scale CPLD programmable device with high-speed computation capability and real-time processing digital signal.
    5. Integrated dual roads precision instrument programmable amplifier, digital zero and automatic smooth shifting.
    6. Select high quality imported servo valve block, all control signals photoelectric isolation, 24V DC and safe and reliable.
    7. The professional software runs on Windows98/2000/XP/Win7 operating system, the testing machine can process test result and then output test report and the characteristic curve design.
    8. Real-time record and dynamic display test curve, select the point and detail analysis.
    9. Provide programmable automatic testing proceed according to the requirements of test.
    11. With accuracy and perfect data analysis function, utilizing man-machine interactive mode to
    analyze and calculate mechanical performance of materials, and automatically calculate max force, elongation, tensile strength, elasticity modulus, yield strength, non-proportional extension stress, Rp0.2(бp0.2),Rsl(бsl))、Rm(бb), R p0.05(бp0.05) and E, etc, also with analysis process with man intervention, thus improve accuracy.
    12. Adopts standard database to manage test data and support batch test.
    13.Customer can add test methods and rules as requirement.
    Main Interface:

    Create Testing Information

    Multi Standard can be selected:

    Main Technical Parameter :
    1. Capacity: 1000KN
    2. Measuring range of force: 2%-100% of FS (20KN-1000KN)
    3. Accuracy: +/-1% of the indicated load value.
    4. Resolution of displacement measurement: 0.01mm
    5. Precision of deformation measurement: +/-0.5% F.S
    6. Resolution: 300000 real points
    7. Sample Frequency: 1KHz
    8. Clamping method: Hydraulic clamping
    9 Constant speed ram stroke control, constant speed strain control, constant speed force control:
    Measurement range: 0.4%~100%FS
    Accuracy: Set value <10%FS, within +/-1.0% of set value Set value <10%FS, within +/-0.5% of set value
    10. Ram max stroke speed: 100mm/min
    11. Max ram stroke: 200mm
    12. Free distance between gripping heads: 0-550mm
    13. Free Distance between compression plates: 0-500mm
    15. Clamping diameter of round specimen: Dia 13-60mm
    16. Clamping thickness of flat specimen: 0-40mm
    17. Diameter of upper and lower plate: 204x204mm (Can be Customized)
    18. Extensometer : standard gauge length 50mm , Max. deformation is 10mm
    19. Span of bending roller : 500mm (can be customized)
    20. Power supply: 220V, 60 Hz, Three Phrase
    19. Host Dimension : 900x800x2450mm
    20. Control box: 1140x700x930mm
    21. Weight: 4200kg

  • Textile Tensile Tester 02T $5,850.00

    Introduction : This Tensile tester for and Yarn and Fabric Tensile Tests is a new generation of tester with i nnovative desi gn, convenie nt using, excellent performance and pleasing appearance, this tester is special d eigned in testi ng textile an d Yarn. Tensile tester contain dozens of pre built test methods just select test method from menu attached the sample click and rest will be done automatic after completing the test griping jaws will return back to sele cted test meth od start leng th to perfor m next test. It is computerize d equipment can be operated manually and self c ustomize test can also programmed.

    Meet Standards:
    ISO1 3934.1, ISO 13934.2, IS O13937.2, IS O9073.4, IS O13936.1, ISO13936.2, ISO13935.1, ISO13935.2, ISO 2062 ,
    ASTM D22 56 ASTM D5034, ASTM D5035, AS TM D2261, A STM D5587, ASTM D3936, ASTM D49 64.ETC.

    Test Function::
    1- Constant Speed Tensile Test
    2-Peeling Test
    3-Tearing Test
    4-Seam Slippage Test
    5-Bursting Test
    6-Definite Elongation Test Load Test
    7-Definite Load Test Elongation Test
    8-Elastic Recovery Test
    9-Yarn Strength Test Lea Strength test .
    Features:
    Working pattern: CR E principle, controlled by large LCD, equipped with an online interface, can be also controlle d by comput er
    with professional textile and yar n testing software., real time displa y graphs,
    breaking load, elonga tion, with P C powerful a nalysis syst em, also can give yield load, yield elongation, CV% of l oad…etc.
    Adopt imported sensor from American Tedea.
    AC servo drive, ball screw, to do a wide range speed settin g, suitable f or all kinds of material mechani al performa nce testing.
    Accordin g to the customer need to provide a variety of standard test functions can also be customized accordin g to customer requirements.
    With diffe rent clamps can perform different test perfectly.
    All testin g results and graphs can be output in to Excel, word and be printed accordingly.
    With the protective function of overload, over current, over voltage.
    Displacement upper and lower limitation, also with emergency stop.
    Multi Unit is selectable: CN, N, Lb, g, Kg, mm, Inch

    Technic al Parameter:
    Load cell: 2500N (50 00N Optional) for Fabric Test, 3000C N for Yarn
    Test Precision of measurement strength : ± 0.5 % of the indicated load v alue
    Gauge L ength: 20-350mm ±1%
    Jog speed: 2mm/min- 1000mm/min

    Return speed: 2 mm/min-1000mm/min
    Speed accuracy: <±2%
    Break time accuracy: ±0.01s
    Effective stroke: 700m m (also can be customi zed according to custom er’s requirement)
    Resolutio n of stretch: 0.1mm
    Clamping method: Mechanical for fabric and yarn
    Machine dimension: 3 80×480×14 50mm
    Machine weight: 120kgs

    Optional Items:
    Pneumatic Grips
    Grip s: Pair of adjustable centre flat faced pneumatic grips 75mm w ide.
    Jaw s for ASTM D 1683 Jaws for ASTM 5034

  • Universal Computerized Tensile Tester $5,750.00

    Introduction :

    This Universal testing machine is applicable in testing the rubber ,plastic film ,cable , fabric , yarn, paper ,aluminum board and so on . It is ideal for high-capacity tension, compression, bend/flex, and shear testing, these machines are guaranteed to meet the relative requirements of ISO, ASTM, JIN, GB and many other testing standards.

    Product features :

    1. Control card adopts advanced neural adaptive PID control algorithm, and truly realizes three closed-loop digital control.

    2. Data acquisition system consists of or channels high precision A/D conversion channel. The maximum resolution of 1/300000. There is no subsection of all process, meanwhile it can have 4 subsections or no subsections according to customers’ requirement.

    3. Select BB, AD and Xilinx original brand integrated devices and digital design.

    4. Built-in large scale CPLD programmable device with high-speed computation capability and real-time processing digital signal.

    5. All control signals photoelectric isolation, 24V DC and safe and reliable.

    6. The professional software runs on Windows98/2000/XP/Win7 operating system, the testing machine can process test result and then output test report and the characteristic curve design.

    7. Real-time record and dynamic display test curve, select the point and detail analysis. Auto set &zero, auto indification. Software have facility of backup and recovery of data. Data transfer/ communication through USB, RS232, user password authentication.

    8. With accuracy and perfect data analysis function, utilizing man-machine interactive mode to analyze and calculate mechanical performance of materials, and automatically calculate results according to different testing standards, such as break force, max force, elongation…etc, also with analysis process with man intervention, thus improve accuracy.

    9 Adopts human-computer interaction to analyze and count performance indicators of materials. It has both automatic and manual modes.

    10. Adopt stable and reliable AC servo driving system and servo motor, the adjustable rate can up to 1:100000

    11. With the protective function of overload, over current, over voltage, displacement upper and lower limitation and emergency stop.

    Main Technical Parameter :

    1. Load Cell : 5000N

    2. Strength Measurement Precision : ±0.5% of the indicated load value, measurement range from 0.4% to 100% of the load cell capacity.

    3. Strength Resolution : 1/300000

    4. Precision of displacement : 0.0025mm

    5. Crosshead Speed : 0.01—500mm/min (Arbitrary Setting)

    6. Speed Accuracy : ±1%(0.01~10mm/min); ±0.5%(10~500mm/min)

    7. Valid Tension Distance (After install the grips): 600 mm

    8. Compression space: 600mm

    9. Compression Clamp: Ф100mm (Other dimension can be selected)

    10. Power : 220±10%V, 50Hz, Single Phrase

    11. Dimension : 520×380×14500mm

    12. Weight : 100kgs

    Packing List
    Items Serial No. Name Specification and Quantity
    1 Mainframe one Set
    Product 2 HP Computer one Set
    3 HP Color Printer one Set
    4 Remote Controller one Set
    5 Software one Set
    1 Tension Grip one Set
    2 Compression Plate one Set
    Accessory
    3 Hexagon Spanner M5 : one Piece
    4 Adjustable Spanner one Piece
    5 1-Screwdriver one Piece
    6 Cross Screwdriver one Piece

Close My Cart
Recently Viewed Close
Close

Close
Navigation
Categories

Fatal error: Uncaught TypeError: fclose(): Argument #1 ($stream) must be of type resource, bool given in /webroot/n/u/nunim001/marstraders/www/wp-content/plugins/wp-super-cache/wp-cache-phase2.php:2381 Stack trace: #0 /webroot/n/u/nunim001/marstraders/www/wp-content/plugins/wp-super-cache/wp-cache-phase2.php(2381): fclose() #1 /webroot/n/u/nunim001/marstraders/www/wp-content/plugins/wp-super-cache/wp-cache-phase2.php(2141): wp_cache_get_ob() #2 [internal function]: wp_cache_ob_callback() #3 /webroot/n/u/nunim001/marstraders/www/wp-includes/functions.php(5373): ob_end_flush() #4 /webroot/n/u/nunim001/marstraders/www/wp-includes/class-wp-hook.php(324): wp_ob_end_flush_all() #5 /webroot/n/u/nunim001/marstraders/www/wp-includes/class-wp-hook.php(348): WP_Hook->apply_filters() #6 /webroot/n/u/nunim001/marstraders/www/wp-includes/plugin.php(517): WP_Hook->do_action() #7 /webroot/n/u/nunim001/marstraders/www/wp-includes/load.php(1260): do_action() #8 [internal function]: shutdown_action_hook() #9 {main} thrown in /webroot/n/u/nunim001/marstraders/www/wp-content/plugins/wp-super-cache/wp-cache-phase2.php on line 2381