62 results

  • Sort by
    ...
  • 26B Tumble Dryer Micro computer control $3,750.00

    It is used for the test for drying process and the drying procedures needed by other textiles ,which are prescribed in the standard textiles.

    Standard: BS EN ISO 6330-2012, AATCC 135, NEXT standards

    Features:
    Quality steel with hot coatings as outer shell, and drum is made of stainless steel.
    The new impact design ensures silent running and safe operation.
    Micro computer control drying temperature, automatic cooling before drying finished.
    Digital electricity, hardware control, strong anti-interference ability.
    With door open protection.
    Drying time can be random selected.
    Max loading capacity can reach 15kgs (rated 10kgs).
    Technical Parameter:
    Type: front-loading, horizontal drum
    Rated specimen drying: 10kg
    Drying time: room temperature-80℃
    Drum diameter: 695mm
    Drum depth: 435mm
    Drum volume: 165L
    Drum speed: 50 r/min
    Lifting vanes number: 3 pcs, 120 ° between each one
    Power: 220V, 50Hz, 5.5KW
    Dimension: 785×960×1365mm
    Weight: 100kgs

  • 50X Desktop Textile Ozone Chamber $18,687.00

    Ozone Test Chamber is used to determine the colorfastness of textiles
    when it is exposed to ozone in the atmosphere at room temperature..

    Features:
    The instrument consists of a stainless steel experimental chamber and a fully enclosed gas circuit for the production of ozone by silent discharge. The entire ozone gas generated and captured is enclosed to ensure personal safety. Ozone aeration chamber: composed of ozone generator, fan, baffle, sample compartment.
    Standard: AATCC 109, ISO 105 G03

     Download Brochure

    Temperature control range 0-80℃, control accuracy: +-0.2℃
    Humidity control range 30-98%,ontrol accuracy: +-2%
    Ozone concentration 0-200p.p.h.m,control accuracy:+-1p.p.h.m
    Ozone chamber size 500mm (W)x400mm(D)x400mm (H)
    Sample Hanger 2 layers
    Weight 90Kgs
    Ozone generation system
    The system uses high-precision ceramic high-voltage plate discharge.
    Ozone concentration range random setting 0-500pphm
    Ozone removal device Activated carbon
    Ozone detection system
    Detection range 0-200pphm
    Measurement accuracy +-2%,display resolution:0.1pphm
  • AATCC Electronic Crock Meter $650.00

    To determine the color fastness of textiles to dry or wet rubbing.

    A pinned acrylic sample holder ensures rapid sample mounting and repeatability of results. Fitted with a pre‐determined electronic counter for strokes up to 9999,

    Standards: ISO105‐X12, D02, Bs1006 D02, DIN54021, IWS Tm165, JIS K6328.

    Technical Parameter:
    Testing Time: 1‐99999
    Rubber Travel: 104/100mm (Can be adjust)+/- 3mm
    Rubbing Speed: 60r/min
    Rubbing pressure: 9N
    Rubbing Head: Roundness:φ16mm
    Dimension: 600mm x 225mm x 270mm
    Weight: 11kgs
    Power Source: AC 220V, 50Hz

    Accessories:
    Rubbing clothing 1 (box)
    Sand paper 2 (pcs)
    Rings 2 (pcs)

  • AIR PERMEABILITY TESTER $5,525.00

    Automatic Fabric Air Permeability Tester is used to test the air permeability of various woven fabrics, knitted fabrics, non-woven fabrics, industrial filter materials etc

    Standards:

    ASTM D737, ASTM D3574, AFNORG07-111, BS5636, DIN53,887,EDANA140.1, EN IS07,231, ENISO9,237, JIS L1096-A, TAPPI T251 and so on.

    S Model: Manual replacement of the Orifice plate.

    A Model: Automatic replacement of the Orifice plate.

    1. More excellent anti-jamming, more excellent stability, more rapid data transference speed.
    2. Adopt microcomputer control system, branded high accuracy pressure sensor, digital feedback and adjust air volume.
    3. Automatic orifice plate replacement, no manual replacement .

    4.Automatic orifice plate replacement, no manual replacement

    1.  Automatic follow, measure and display pressure difference of each point with high stability and repeatability.
    2.  All plates have been calibrated by-point in full testing range to let test data more accuracy.
    3.  All test data is displayed by large high-definition large color touch screen displayer, no need to calculate test result by hands.
    4.  Automatic converse air permeability rate and air permeability volume to improve test efficiency.
    5.  Large touch screen displayer and controller.
    6. Adopt micro-computer control, insure the test data accuracy and test data can be saved and processed automatically.
    7. Special designed sample holder accomplish test in box and ensure the yarn without slip.
    8. Equipped with the inner printer, test report can be printed anywhere.
    9. Testing procedure can be set conveniently by the inner control panel.
    10. 14 With the function of saving data when power-down.
    11. Professional software support to output results to PC.

      Technical Parameters:

      1.  Working pattern: high precision imported pressure sensor, touch screen control, printing and testing report
      2.  Pressure volume : 50-500Pa
      3.  Specimen thickness: ≤12mm

      4 .Measuring accuracy : ≤±2%

      1. Test area/diameter: 20 cm2, 38 cm2 Optional : 50 cm2,100cm2, 5 cm2, φ50mm
      2.  Units: Total 8 Units to can be freely switched: mm/s, L/m2/s, L/dm2/min, cm3/cm2/s, ft3/ft2/min, m3/m2/min, m3/m2/h, dm3/s
      3.  Orifice plate: 8 Pcs ( Φ0.5mm, Φ1.0mm, Φ1.5mm, Φ2.5mm, Φ4.5mm, Φ8.0mm, Φ14.5mm, Φ26mm)
      4.  Calibration : unique calibration board
      5.  Permeability ratio range: 0.2-11000mm/s (L/m2.S)
      6. External Dimensions: 700x1000x1000mm
      7. Gross Weight: 100kg
      8. Power source: 220V±10% 50HZ

      To alter the specification or modify the appearance without notice right is reserved

  • Analogue Peel Bond Strength Tester $60.00

    Analogue Peel Bond Tester To determine the strength requires to separating fabric with interlining -fusing. Can give accurate results. Can be used vertically and horizontally Certified measuring Gauge

    Peel test or adhesion testing is the measurement of the adhesive or bond strength between two materials. It is performed by applying a tension load to the materials on one of three different ways: Pulling two flexible materials axially away from each other forming what is called a ‘T’ peel Material or substrate, both held vertically, forming what is called a 180 degree peel Material or substrate, which is held horizontally, forming what, is called a 90 degree peel

    Features: Analogue Dial Gauge (50gr / 3kg, other gauges available on demand)
    Standard Analogue Gauge.
    Single pointer Gauge
    IBE instruction Manual included

    Digital Handy model and fixed floor model are also available

  • Automatic Fabric Shrinkage Tester (ISO-6330-2012) $6,475.00

    This Fabric shrinkage tester is used for testing the shrinkage and relaxation after washing of various textiles such as cotton, wool, silk, linen, chemical fiber, knitwear, costume etc. It is fit for the factory and testing center with the long-term test.

      Standards:ISO-6330-2012, ISO 5077, IWSTM31, BS4923, EN25077/26330, JISL1909, FZ/T70009.

     Features :

     The apparatus used are for industrial design, suit to the harsh long continuous testing requirements

    Suspended inner canister exclusive used, smoothly operation without vibration

    Include 12 groups washing programes, users can prepare 6 groups their own shrinkage procedures, and provide programs storage

    Variable frequency control technology used, to protect the electrical safety and the smooth operation.

    Large touch screen display, figures show clearly

    Using high-precision pressure sensors, to ensure that accurate and reliable water level.

     Outside and inside fully use stainless steel.

    Technical parameters:

    Category Horizontal roller type, front door feeding mode
    Inner layer roller Diameter : 520±1mm
    Depth: 315±1mm
    Inner & outer roller

    gap

    2.8cm±0.1cm
    Lift vane quantity 3 PCS 120° even distribution
    Lift vane height 53mm±1mm
    Rotation action Normal: clockwise rotation (12±0.1)S, stop (3±0.1)S
    anticlockwise rotation (3±0.1)S, stop (12±0.1)S
    Soft: clockwise rotation (3±0.1)S, stop (12±0.1)S
    anticlockwise rotation (3±0.1)S, stop (12±0.1)S
    Rotating speed Washing time: 52r.p.m
    Spin : (500±20)r.p.m
    Water level control Low level:10cm , High level:13cm
    Fill water time < 2min (water in high level 13cm
    Drainage duration < 1min (water in high level 13cm)
    Setting range to

    water temperature

    Room temperature to 99℃ (accuracy: ±1℃)
    Heating power 5.4kw
    Washing capacity 5kg
    External Dimensions 850mm×750mm×1200mm
    Weight 140Kg
    Power source Three-wire four-phase 380V±10% 50Hz

  • Automatic Fabric Stiffness Tester $1,675.00

    Fabric Stiffness Tester is used for testing the stiffness of all kinds of..

    woven and knit goods, nonwoven fabrics and coated fabrics, including cotton, wool, silk, linen and chemical fiber, and also of flexible materials such as paper, leather, film, etc.

    Standard: ASTM D1388, IS09073-7, BS EN22313

    Technical Parameter & Accessories:
    1. Working pattern: Micro-computer controlled, infrared stealth slant detecting, liquid crystal display, printing out testing results
    2. Measuring Point: 41. 5°, 43°, 45°
    3. Extension elongation: 0.5-20.5cm
    4. Testing accuracy: 0.01 cm
    5. Specimen specification: 2.5×25 cm
    6 Specimen pressing pushing speed: 0.1-5 mm/s
    7. Has statistics function: average bending length in cm, average bending stiffness in mN.cm, CV%
    8. Power source: AC220V 50Hz
    9. Dmension: 470×230×310mm;
    10. Weight: 18kg

  • Bench top Spectrophotometer $13,937.00

    This Tabletop spectrophotometer  has the advantage of excellent inter-instrument agreement, high accuracy and good replicability.

    It could meet your requirement for both color quality control and color matching very easily.

    Brief Introduction

    1. Transmission D/0 Structure and Reflection D/8 Structure
    2. Double Optical Paths Spectral Analysis Technology.

    It could get the measurement sample data and internal environment data at the same time to make sure the testing accuracy and

    stability for long time running.

    1. Compatible with SCI/SCE Measurement.

    Adopt D/8 illuminant condition recommended by the CIE to meet the color testing requirement for different industries. It could measure with SCI and SCE to see the color data change more clearly.

    1. Four Testing CalibersIt is easy to adjust the testing calibers.The largest caliber diameter reaches 25.4mm. It could test the sample with different sizes.

    This is not only suitable for testing the color of opacity sample, but also suitable for transparent or translucent sample’s transmittance and turbidity.

    1. Large screen display and Stand-alone operation.It could finish the sample test without connecting with the computer. Large screen display to make sure customer could see the testing result directly and clearly and it will be more convenient to set the instrument status. The color quality management software and color match software are optional according to customer’s need.
    1. Unique Calibration Board Design.Fix the calibration board on the testing caliber to make sure the accuracy of the white calibration and guarantee the high accuracy for measurement.
    2. Flexible Test Fixture.It could fix the sample with different size and thickness on the testing port tightly in case of stray light entering to affect the testing accuracy.

    Technical Data:

    Type XHF-CS-820
    Measurement Condition Reflection: d/8(Diffused lighting, 8 degrees receiving) Compatible with SCI/SCE Measurement ISO7724/1、DIN5033 Teil7、JIS Z8722 condition C、CIE No.15、ASTM E1164)Transmission d/0(Diffused lighting, Vertical direction receiving)
    Size of integrating sphere Φ15.2cm, Alvan diffused reflection surface coating
    Illumination Light source CLEDs(entire wavelength balanced LED light source)
    Sensor dual light path sensor array
    Wavelength range 400-700nm
    Wavelength interval 10nm
    Half spectral width 5nm
    Reflectivity range 0-200%
    Reflectivity resolution 0.01%
    Observation angle 2°/10°
    Measurement light source A,C,D50,D55,D65,D75,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12

    CWF,U30,DLF,NBF,TL83,TL84

    Data being displayed SPD distribution/data, sample’s color values, color difference Values / graph, pass/fail results, color error tendency, history data color

    simulation, manual input standard sample, generate measurement

    report

    Measurement time interval 2 seconds
    Large Aperture (LAV):2.54cm (=1inch)
    Reflection Aperture Medium Aperture (MAV):1.5cm(=0.6inch)
    Small Aperture (SAV):0.75cmx1.0cm(0.3inch x 0.4inch)
    Very Small Aperture (VSAV):0.3cmx0.8cm(0.12inch x 0.31inch)
    Color space CIE-L*a*b,L*C*h,CIE-L*u*v,XYZ,Yxy,Transmittance, Hunterlab,
    Munsell MI,CMYK, RGB,HSB
    Color difference formulas ΔE*ab,ΔE*CH,ΔE*uv,ΔE*cmc(2:1),ΔE*cmc(1:1),ΔE*94,ΔE*00
    ΔEab(Hunter),555color classification
    Other colorimetric indices WI(ASTM E313-10,ASTM E313-73,CIE/ISO, AATCC, Hunter, Taube

    Berger, Ganz, Stensby),YI(ASTM D1925,ASTM E313-00,ASTM

    E313-73),Tint(ASTM E313-00,CIE,Ganz),Metamerism index Milm,

    Stick color fastness, Color fastness, APHA, Pt-Co, Gardner

    Repeatability light splitting reflectivity: standard deviation within 0.08% color values: ΔE*ab<=0.015(After calibration, standard deviation of 30 measurements on test white board, 5 second intervals, Maximum: 0.03
    Interface USB
    Data storage mass storage
    Light source longevity 5 years, 1.5 million tests
    Size 583*330*304mm(L*W*H)
    Work temperature range 15℃-32℃ (60°F-90°F)
    Relative Humidity 0℃ to 45℃,relative humidity 80% or below at 35°C, no condensation
    Standard accessories AC power line, color management software, drive software, USB

    cable, black/white calibration tube, 40*10 cuvette, cuvette support,

    testing report

    Optional 40×40 cuvette

  • Button Pull Snap Tester $2,000.00

    This Button Pull Snap Tester is the unique safety test instrument that provides a means to accurately measure how safe accessories are attached in a product. It is also used to compare a variety of accessories from different vendors in the process from product design to production. It is a simple but effective design mainly consisting of a high precision gauge, a sturdy stand and special grips/clamps. It requires very little train. A sample required by standards & regulations is to be fixed horizontally (constant force is applied to secure the sample) so that snap or other accessories attached in fabric can be clamped into.

    It can be used in buttons, zippers, toys testing for many brands like NEXT, M&H, GAP, M&S, NIKE, LIVIS, and other famous brands necessary attachments are available.

    .

     Standards:16 CFR 1500.51~53、ASTM F963、EN71-Part 1、M&S P115A., H&M, NEXT etc

    Standard package 1-16:
    1- Imada Force Gauge FB-30K
    2- Upper Stud Grip
    3- Upper Grasp Button Grip (Upper Tip-Top Grip)
    4- Lower Fabric Clamp
    5- Low Grasp Button Accessories Kit
    6- Three Pronged Clamp
    7- Calibration Weight 15LB
    8- Mechanical Stand for Imada Force Gauge
    9- Upper Long Nose Vise Grip
    10- Upper Universal Grip
    11- Button snap attachment
    12- Extension rod for lower clamp
    13- Allen key for handling fitting (2mm)
    14- Protective goggles
    15- Supper rubber O rings 5 pcs.
    16- Operation Manual

  • COLOR MATCHING CABINET $400.00

    Application:

     It is used for color matching of any product under different lights, it is wide ly applied in Textile, toy, printing, plastic, rubber, chemical, ink, ceramic,

     leather, , paints, chemicals, footwear, leather, metal, food, cosmetics multi-industry field.

     Meets to m ajor international standards for visual color evaluation including:

     ASTM D17 29, ISO3664, DIN, ANSI and BSI.

        Tube length: 12 00mm

        Easy to operate by using individual switches for each light source.

        Elapsed time meter for tracking optimal l amp replacement.

        Automatically alternating among light sources.

        No warm-up time or flickering which insures quick and reliable color judgment

        Economic power consumption and low heat generation for high light efficiency

         Lights:

    Model Name Pcs Power Color Temperature
    Six Lights

    220V, 50Hz

    D65 2 36W/Piece 6500K
    TL84 2 36W/Piece 4000K
    F/A 6 40W/Piece 2700K
    UV 1 40W/Piece 365nnm
    CWF 2 36W/Piece 4200K
    U30 2 36W/Piece 3000K

     To alter the specification or modify the appearance without notice right is reserved

  • COLOR MATCHING CABINET 600MM $400.00

    The scope of application:

    It is used for color matching of any product under different lights, it is wide ly applied in Textile, toy, printing, plastic, rubber, chemical, ink, ceramic,

     leather, , paints, chemicals, footwear, leather, metal, food, cosmetics multi-industry field.

    Meets to major international standards for visual color evaluation including:

     ASTM D17 29, ISO3664, DIN, ANSI and BSI.

    Features:

    1.  Tube length: 600mm
    2.  Easy to operate by using individual switches for each light source.
    3.  Elapsed time meter for tracking optimal l amp replacement.
    4.  Automatically alternating among light sources.
    5.  No warm-up time or flickering which insures quick and reliable color judgment
    6.  Economic power consumption and low heat generation for high light efficiency

          

               4 Lights

    Model Name Pcs Power Color Temperature
    Four Lights

    220V, 50Hz

    D65 2 36W/Piece 6500K
    TL84 2 36W/Piece 4000K
    F/A 4 40W/Piece 2700K
    UV 1 40W/Piece 365nnm

     

         5 Lights

    Model Name Pcs Power Color Temperature
    Five Lights

    220V, 50Hz

    D65 2 36W/Piece 6500K
    TL84 2 36W/Piece 4000K
    F/A 4 40W/Piece 2700K
    UV 1 40W/Piece 365nnm
    CWF 2 36W/Piece 4200K

         

         6 Lights

    Model Name Pcs Power Color Temperature
    Six Lights

    220V, 50Hz

    D65 2 36W/Piece 6500K
    TL84 2 36W/Piece 4000K
    F/A 6 40W/Piece 2700K
    UV 1 40W/Piece 365nnm
    CWF 2 36W/Piece 4200K
    U30 2 36W/Piece 3000K

    To alter the specification or modify the appearance without notice right is reserved

  • COLOR MATCHING CABINET 600MM 1200MM $1,000.00

    The scope of application:

    It is used for color matching of any product under different lights, it is wide ly applied in Textile, toy, printing, plastic, rubber, chemical, ink, ceramic,

     leather, , paints, chemicals, footwear, leather, metal, food, cosmetics multi-industry field.

    Meets to major international standards for visual color evaluation including:

     ASTM D17 29, ISO3664, DIN, ANSI and BSI.

    Features:

    1.  Tube length: 600mm
    2.  Easy to operate by using individual switches for each light source.
    3.  Elapsed time meter for tracking optimal l amp replacement.
    4.  Automatically alternating among light sources.
    5.  No warm-up time or flickering which insures quick and reliable color judgment
    6.  Economic power consumption and low heat generation for high light efficiency

          

               4 Lights

    Model Name Pcs Power Color Temperature
    Four Lights

    220V, 50Hz

    D65 2 36W/Piece 6500K
    TL84 2 36W/Piece 4000K
    F/A 4 40W/Piece 2700K
    UV 1 40W/Piece 365nnm

     

         5 Lights

    Model Name Pcs Power Color Temperature
    Five Lights

    220V, 50Hz

    D65 2 36W/Piece 6500K
    TL84 2 36W/Piece 4000K
    F/A 4 40W/Piece 2700K
    UV 1 40W/Piece 365nnm
    CWF 2 36W/Piece 4200K

         

         6 Lights

    Model Name Pcs Power Color Temperature
    Six Lights

    220V, 50Hz

    D65 2 36W/Piece 6500K
    TL84 2 36W/Piece 4000K
    F/A 6 40W/Piece 2700K
    UV 1 40W/Piece 365nnm
    CWF 2 36W/Piece 4200K
    U30 2 36W/Piece 3000K

    To alter the specification or modify the appearance without notice right is reserved

  • Densiometer X-Rite CAPSURE $0.00

    RM200-PT01 is use anywhere to quickly and accurately match color from any surface, material, or fabric back to a Pantone Color..

    This complete color-matching solution for fashion, interiors, graphics, and product designers lets you translate on-the-go inspiration into the closest color match from the Pantone Color System of your choice. Accurate even on small, patterned, or multi-colored textures and textiles Comes pre-loaded with over 10,000 Pantone Colors Stores up to 100 inspiration captures with audio notes, plus date and time stamp CAPSURE Sync updates libraries with the latest Pantone Colors automatically

    Technical Parameter:
    Portable, palm-sized device
    Comes with protective. case
    USB rechargeable.
    Instant color matching in the palm of your hand.
    Toggles easily across multiple Pantone Color Systems.
    Can be set to match to Pantone’s Formula Guide, Color Bridge Guide and Pastels & Neons Guide
    Includes sRGB, Adobe RGB, HTML, Lab, and XYZ values for multimedia design.
    Recommends color schemes and harmonies.
    programs, including Adobe® Creative Cloud® applications

  • Digital Elmendorf Tear Tester $5,400.00

    Application:

    Digital Elmendorf Tear Tester, A computer controlled falling-pendulum instrument, to determine the ballistic tearing strength of textiles, plastics, paper or board.

    It enables rapid determination of the dynamic resistance of materials designed to be subjected to strong shearing loads (e.g. fabrics) or liable to be damaged by sharp or heavy objects (e.g. paper bags). Subsequently, the test was naturally adopted for all materials in the form of sheet or films, cardboards, cloth, knitted fabrics, plastic films, aluminum foil, non-woven fabrics, complex flexible packaging etc. But does not apply to sparse fabric or stretch materials which tearing direction might be shift in test.

    Procedure: The test is carried out on a specimen composed of one or more sheets of standard dimensions 100 x 63 mm, a crack in length of 20 mm of specimen is notched automatically, a usually with a distance of 43mm (1.7 in) remaining to be torn after initiating the tear. The energy of a pendulum of suitable weight is used to completely tear the specimen. The difference in the angle from the vertical of the center of gravity of the pendulum between the downswing and upswing is a measure of the energy absorbed in tearing the sample

    This angular movement is measured with a digital encoder and is immediately converted to the mean tearing force for a single sheet by the microprocessor and software incorporated in the apparatus.

    Standard: BS 4253, ASTM D1424/5734 , DIN 53862, BS EN ISO 13937, ISO1974/9290.

         Features:

         Works in accordance with all known test standards. RS-232 data output, equipped Tearing Test software Auto specimen notching

        Repeatable, pneumatic specimen gripping system guarantees sufficient clamping pressure to avoid all slipping phenomena,

        thus ensuring perfect reproducibility of the experimental conditions.

        Automatic compensation for friction and leveling errors, no slave pointer, therefore no friction, alignment and maintenance problems.

        Unit: N, gf, cN, Cp can be selected.

    Specifications:

    1. Testing range: A hammer: 0~16N B hammer: 0~32N C hammer: 0~64N D hammer: 0~128N
    2. Testing accuracy:≤±0.2%F·S
    3. Tearing length:43mm
    4. Length of automatic cut:20±0.1mm
    5. Sample size:100×63mm
    6. Type of sample clamping: pneumatic clamping
    7. Power source:AC220V50Hz
    8. External dimension:520×380×700mm
    9. Weight: 68kg

    Packing list of

    No. Name Qty Remark
    1 Tearing Tester 1 Set
    2 Cutting Templates 1 Pc For preparing Specimen
    3 Cutting Knifes 1 Pc For preparing Specimen
    4 Weights 1 Set
    5 Software 1
    6 Air Compressor 1 Optional

  • Digital Leather Softness Tester $1,350.00

    Leather softness tester is applied to measure the softness of leather and animal skins.

    in order to understand the softness and hardness is uniform or not in the same batch of leather, or the softness and hardness is difference or not in a single piece of soft leather..

    Standard: IULTCS.IUP/36, ISO 17235.

    Technical Parameters:
    a. Test diameter: 25mm/20mm
    b. Load: 530±10g driven by miniature pneumatic
    c. Dial: 0.1-10mm
    d. Dimension: 136×485×168 mm
    e.Weight: 5.3 kg
    f.Include calibration plates

  • Digital Wet Ability Tester $1,800.00

    Fabric Wet ability Tester applies to determine the wet ability of woven, knitted or non-woven fabrics. A funnel is positioned above the penetrating plate and a preset quantity of salt water solution is delivered to the fabric, simultaneously starting the digital timer, which connected to the “North-South” contacts. The timer stops automatically when all solution has been passed through the fabrics, providing data on permeability to evaluate fabrics and finishes.

    Standard: ISO 9073-8, FZ/T60017

    Technical Parameter:

    1. The burette capacity: 50 ml;

    2. The funnel flow velocity with electromagnetic valve:

    25 ml flow in (3.5 + / – 0.25) s, drip tube 1, outlet is about Φ3 mm 80ml flow in 6s, drip tube 2, outlet is Φ 6 mm
    3. The distance between funnel mouth and specimen: adjustable

    4. The base material: organic glass;

    5. Plate size: 100 mm * 100 mm * 25 mm;

    6. Specimen size: 125 mm * 125 mm;

    7. The timer accuracy: 0.01 s;

    8. Power supply: AC220V+/-10%

    9. Size: 530 mm * 250 mm * 250 mm;

    10. Weight: 15 kg

  • Durawash Print and Fabric Durability Testing Machine $5,250.00

    The Durawash test machine simulates the conditions necessary to meet leading chain stores standard garment and fabric durability tests. The process control systems provide excellent accuracy and repeatability. The physical performance of the durawash is compatible with that of the “Hoovermatic” Twin Tub and complies with the Marks and Spencer Fabric Durability (C15) and Print Durability (P5) methods of test.

    Fifteen minutes of testing in the Durawash is approximately equivalent to five domestic washes, removing the need for repeated wash and dry tests.

    This results in reduced cost, labor and required laboratory space and an increased capacity for testing

    Multiple tests can be performed in this one instrument, including print durability, pleat retention, cockling,

    flock retention, crinkling, differential shrinkage, security of attachments and more.

    Standards:  M&S C15 Print Durability, M&S P5 Durability Wash for Garments and Components, M&S P6

    Durability Wash for Pleat Retention, M&S P7 Durability of Waddings and Quilted Waddings to Washing,

     

    NEXT TM 8 Appearance for Garments and Products,

     

    BHS TM 12A Durability Wash for Prints and Flock,

     

    BS 7907:2007: Code of Practice for the design and manufacture of children’s clothing to promote mechanical safety

     

    Features:

     

    1. Water bath is made of high quality SUS304 stainless steel.
    2. Protection: water-lacking alarm, protection device when opening door.
    3. Test-finished alarm.
    4. Digital Display

    Technical Parameter:

    1. a)Fabric/Garment Capacity: Approx 2kg
    2. b) Rotation speed: 560 r/min +/-2%
    3. c)Specimen size: 500mmx500mm
    4. d) Max temperature: 60  +/- 2 , (Could be adjustable)
    5. e) Dimension: 700 x 670 x 900mm
    6. f) Weight: 75kgs
    7. g) Power: 220V, 50Hz

     

  • Electronic Crock Meter $750.00

    Used for testing the fastness to dry or wet rubbing and the fastness to brushing of all kinds of colored textiles, motorized operation, auto stop when counts reach pre-set counts..

    Features:

    1. Adopt linear slide, running more smooth
    2. Rubbing head always keep horizontal, no matter thickness of specimen,

    no adjust position of rubbing head, easier operation.

    1. Adopt block pressing method, better clamping specimen.

     Standards: ISO105-X12, D02, Bs1006 D02, DIN54021, IWS Tm165, JIS K6328. AATCC8/165

    Technical Parameter :

    Testing times 1-99999
    Rubbing travel 104±3mm
    Rubbing speed 60r/min
    Rubbing pressure 9N
    Rubbing head Roundness :ф 16mm
    External Dimensions 600mm×225mm×270mm
    Weight 12kgs
    Power AC 220V, 50Hz

  • F-26 Tumble Dryer For AATCC, ISO $375,000.00

    It is used for the test fo drying process and the drying procedures needed by other textiles ,which are prescribed in the standard textiles.

    Standard: BS EN ISO 6330-2000, AATCC 135, NEXT standards

    Technical Parameter:

    Rowing Box Speed: 50r/min

    Rowing box diameter: (58+’/-1)cm

    Rowing box capacity: 100 L

    Volume: 5kg

    Raised wing number:3 (120 degree between each two wings)

    Controlled air outlet temp: <80 C

    External Dimension : 595x580x860mm

    Weight: 38kg

    Power: AC220V 50Hz

     

  • FABRIC BURSTING STRENGTH TESTER $0.00

    The scope of application:

     Used in a variety of textiles, non‐ woven fabric, leather and other materials, while force (flexible diaphragm law ) in latitude and longitude and in all directions , expansion force and dilation of the performance measurement .

     Related standards: ASTM D3786, ISO 13938.1

    Instrument characteristics:

    1.  Use 16bit Industry‐grade MCU (ATMEL, US A), more excellent anti ‐jamming, more excellent stability
    2.  Print t he test reports by built‐in thermal printer
    3.  Dial pressure mete r to show pressure applied to specimen
    4.  Proveded with a touch screen readout of pressure, time of burst,
    5.  height of burst and the peak hold facility
    6.  High quality and renewable rubber diaphragms, manual griping device, and forward reverse and neutralal drive sys tem.

    Technical Parameters:

    Test Area φ30 .5±0.05mm (7.3cm2)
    Test Area φ79 .8mm±0.05 mm (50cm2 )
    Capacity 0~6MPa (6000K pa)
    Fluid rate Adjustable
    Bursting strength accuracy ±0. 5%FS
    Hydraulic fluid glycerin with concentration 85%
    Power supply Ac220V 50Hz/110V, 60Hz
    Instrument  dimension 560 ×400×680mm(L×W×H)
    weight 70kg
    Packing list of XHF‐16
    No. Name Quantity Remark
    1 Bursting Strength Tester 1 Main body
    2 Diaphragm 5
    3 Specimen holders 1 set φ30.5± 0.05mm
    4 Specimen holders 1 set φ79.8mm±0.05mm
    4 Spanner 1 Disassemble Holders

  • Fabric Conditioning Chamber $5,130.00

    Product description:
    Conditioning Chamber to condition samples prior to testing. Completely adheres to the textile conditioning requirements of temperature 22+_ 2 degree Celsius & humidity 65+- 3%.
    Laboratory Conditioning Chamber. For the conditioning of samples prior to testing, also applied
    for Water Vapour Permeability Testing when equipped with related kits.

    Technical Parameter:
    Chamber Capacity: 80L
    Controller: Programmable Temi 880 touch screen controller. 120 groups 1000 sections, 99H every section, support RS 232 and RS485 communication, support PC monitoring and saving results, USB output, real time display curves.
    Test Chamber Dimension: 400 * 500 * 400mm(WidthxHeightxDepth)
    Machine Dimension: 970mm * 1360mm * 970mm(WidthxHeightxDepth)

      Performance:
    Temperature Range: 0℃ -+150℃
    Humidity Range: 20%-98%RH
    Temperature maintaining stability: ±0.5℃
    Temperature uniformity within the chamber volume: ±2℃
    Temperature Resolution: 0.01℃
    Humidity maintaining stability: ±2%R.H
    Heating and Cooling Speed: 1-3℃/min(No Linear Condition)

      Configuration:
      Main function parts use world brand from USA, Japan, Germany, France, Denmark…etc

      Material of outside Chamber: SUS#202 stainless steel.
    Material of inside chamber: SUS #304 stainless steel with 1.0mm thick.
    Insulated layer: Insulated layer fireproof PU + heat insulating glass wool
    Observation window: adopt conductive film toughened glass, Philips PL-S 11W light.
    Heater: U type Fin type #304 seamless steel high-speed heating electric heater.
    Fan: Centrifugal
    Compressor: French Tecumseh
    Cooling Method: Air cooling
    Quantity of shelves: 2
    Power: 220V, 50Hz, 4KW

  • Fabric drying tester $17,750.00

    Fabric drying tester, it is compliance with American AATCC201 test standard design to automatic test the fabric drying rate instrument.

    Using high-precision temperature sensor, air speed sensor , and automatically drop device test fabric drying time and drying rate

    The instrument built-in control panel and display screen, can complete all the test in without connecting to a computer, can also be through the WiFi connect computer for data transmission, data is displayed in the form of curves and graphs , convenient for the user to analyze and print.

    Test Principle:

    Instrument to simulate human body sweating, sweat in drying process on the fabric, fabric placed above the hotplate , drip 0.2 ml of water in the middle of the heating plate, use 1.5 m/s air to dry the sample, and the infrared temperature sensor test fabric temperature changes ,when fabric dry end,test the drying time get drying speed.

    Standard: AATCC 201
    Hotplate size:305mmX305mm
    Sample Holder:150mm×40mm×2mm
    Hotplate temperature:37 ± 0.1 ºC
    Temperature display:0.01 ºC
    Air Speed :1.5m/s ± 0.1m/s
    IR thermocouple:15~50ºC ± 0.1 ºC
    Sample thickness:0~10mm
    Water Dripping:0.2ml ± 0.001mL
    Data Transfer:WiFi
    POWER:AC220V±10%,100W or AC110V±10%,100W
    Dimension:52(L)×40(W)×26(H)cm
    Weight:30kg

  • Fabric GSM Cutter $85.00

    The GSM Cutter is for sampling the materials of fabrics and non-fabrics.

    The handle is made of aluminum alloy, no broken, Star structure is designed according to the
    human touch.

    Adopt the high-carbon blade (white); press plate is made of aluminum alloy, not rust, Tight press.
    here are 16 stainless steel cross screws on the press plate , make it firm and not slide ,
    no rust .

    The cutter’s face adopt international advanced T-shaped anti-slip groove structure; minimize the stress in the tangent direction during the cutting and reduce hand fatigue, also ensure that the sample is flat and not slip, a precise cutting .

    Adopt the thickness adjustable structure to protect the blade and pad.

    It use cork pad, not rubber pad.

    Standard: ISO3801, BS2471, ASTM D3776, IWS TM13

    Technical Parameter:

    Sample area:                         100cm2

    Max. Cutting thickness:                5mm

    External Dimensions:                 156×112

    Accessories: 2 cutting pads included

    4 Extra cutting Blades included (Made in UK)

  • Fabric Thickness Tester $1,400.00

    Fabric Thickness tester is applicable of measuring the thickness o f tissue pap er, woven, knitted fabric s, non- woven and o ther uniform materials. It is designed according to

    Standards: ISO5084 ,FZ/T6000 4, ISO9073, ISO 98 63….etc.

    Technical Para meter :

     Thickness measuring range : 0-25mm

    Min. graduation value : 0.001 mm

    Press foot diameter: 11.28mm , 50.48 mm, 56.42 mm, 112.84 mm

    Press er foot area : 100, 2000, 2500, 1000 0(mm2)

    Weighing poise :   5cN*1, 10cN*2, 50cN*2, 100cN*1,4 00cN*1,1000 cN*1 (combine)

    Press time: 10s,30s

    Test speed: when press time is 10s, about 2.1 times/minutes; when press time is

    30s, 1.2 times/minutes.

    Weight : 30kg

    External Dimensions : 210x450x400mm

    Power source : A C220V±10% 50Hz

  • Fabric Wettability Tester $1,812.00

    Fabric Wettability Tester applies to determine the wettability of woven, knitted or non-woven fabrics..

    A funnel is positioned above the penetrating plate and a preset quantity of salt water solution is delivered to the fabric, simultaneously starting the digital timer, which connected to the “North-South” contacts. The timer stops automatically when all solution has been passed through the fabrics, providing data on permeability to evaluate fabrics and finishes.

    Standard: ISO 9073-8, FZ/T60017.

    Technical Parameter & Accessories:
    1. The funnel flow velocity with electromagnetic valve:
    2. The distance between funnel mouth and specimen: adjustable
    3. The base material: organic glass;
    4. Plate size: 100 mm * 100 mm * 25 mm;
    5. Rubbing Head: Roundness:φ16mm
    6. Penetration plate
    7. Measuring Cup
    8. Timer: 0-99.99s
    9. The timer accuracy: 0.01 s;
    10. Power supply: AC220V+/-10%
    11. Size: 530 mm * 250 mm * 250 mm;
    12. Weight: 15 kg

  • Geotextile Water Permeability Tester $0.00

    Geotextile water permeability tester is used for vertical permeability tests of geotextile and composite materials..

    Standards: GB/T15789, ISO11058, ASTM D4991, JTG E50, SL/T235

    Technical Parameter:

    Max Head Pressure: 250mmH2O(2450Pa)

    Holder Diameter: Φ50±0.5mm

    Maximum thickness of the sample: 20mm

    Time control: 0~99.99s

    Thermometer range: 0~50℃ (accuracy: 0.1℃)

    Cylinder: 1000ml Minimum scale value:10ml

    Power: 220V, 50Hz

    Dimension: 400×520×700(mm)

  • Gyrowash Washing Fastness Tester $4,475.00

    The washing fastness tester Gyrowash, to determine color fastness to washing or dry cleaning to washing fastness methods, it complies with ISO, BSI, AATCC.

     

    Application:

    Washing Fastness Tester, to determine color fastness to washing or dry cleaning to ISO, BSI, AATCC and Marks&Spencers standards.

    Available in different sizes such as portable washing fastness tester, etc. The washing fastness tester uses stainless steel rotor to holds washpots on each of four sides and rotates at a constant 40 rpm (+/-2 rpm). Washpots are preheated in appropriate test solution, structure wholly made of very strong stainless steel

     

    Colored touch screen display and PLC control, containers are sealed with either a Neoprene rubber gasket or optional Teflon gasket.

    To offer a reliable and safe washing fastness test, Washing fastness tester equipped with water-lacking alarm, protection device when opening door, Test-finished alarm, Automatic shutdown with audible warning etc.

     

    Standard: ISO105 C01-C06, M& SC4A. 5.37. P3B, IWSTM 7.115.177.193.240, 241, AATCC 2, 3, 28, 61, 62, 86, 132, 151, 190, FTMS 191-5610/5622, BS 1006, NEXT

    Specifications:

    Rotation speed: 40+/-2rpm

    Quantity of positions: 6 Pcs 550ml+6Pcs 1200ml

    Size of ISO washpot: 550ml   75mm dia x 125mm(3.0 in x 5.0in)

    Size of AATCC washpot: 1200ml 90mm diax 200mm(3.5 in x 8.0in)

    Temperature : Max 95℃   Adjustable

    Running time: Adjustable        

    Packing list of XHF-13

    No. Name Qty Remarks
    1 Washing Fastness Tester 1 Main body
    2 550ml washpot 6 Be Installed on the machine
    3 1200ml washpot 6 Be Installed on the machine
    4 Stainless Steel Balls 150
    5 Stainless Disks 12

  • Handheld Spectrophotometer $3,112.00

    First spectrophotometer in China

    1.  Obtained China Metrology Accreditation Certificate Large data storage space Large TFT display screen
    2.  Modern and fashionable design based on human engineering
    3.  Easy to use operation modes and compact operation interface
    4.  Pre-locating panel design for easy instrument calibration
    5.  Uses LED light source; high capacity rechargeable lithium-ion battery
    6.  Can measure both SCI (specular included) and SCE (specular excluded) at the same time
    7.  Includes PC software to manage data
    8. Can connect to mini-printers for printing

    High performance-price ratio among international similar products

     As China’s first spectrophotometer, integrates multiple innovative technical characteristic, and extends the boundary of on-site color quality control during production;

    It can be applied to laboratories, factories and on-site operations, and can achieve the best color management across all application fields’ quality control

    Allows medium and small companies to obtain high performance color management system with relatively low price

    The software contains all necessary color equations, standard light sources, and a large number of standards for specific industries and applications

    Operation system supports both English and Chinese interfaces, and we offer to design the interface in other languages based on the need of our customers.

    Professional design, powerful instrument functions

    Professional horizontal design and it does not have any moving parts, which avoids the shaking of the instrument during measurement process.

    This makes the measurement more accurate

    PC software for easy measurement data management

    Can measure both SCI and SCE at the same time

    Large data storage space: can store up to 100 sets of standard samples, with up to 200 measurement records for each standard sample

    Adding powder test accessories, easily measure the color of the Powder, granules and other samples

  • HF Guard Digital button Pull Tester $1,800.00

    We are introducing this electronic system for Button Snap and Pull tests with all standard test grips per standards. Tester can also be used for tension and compression force, insertion and withdraw force and fracture test for Rubber and plastics, in Textile for yarn and fabric, Architecture doors and windows, composite material, Cables and Cords, and auto parts industry, have preset test speed, and step less speed regulation function Manual and Auto cycle test shift.
    Tester can connect with computer, you can control the test stand move up or down by computer. The Digital tester can preset the stop force, when the force arrived the preset force, the tester will auto stop. It means our force gauge can control the test stand when to stop test by preset force.
    Digital button snap and pull tester can be used for measuring tension force of different test methods. Easy to operate bench top model can be used for pull or push direction of the force. The display has the blue background light lamp. The tester can set the upper and lower limit to judge the measured results.
    The gauge has installed the pilot lamp and buzz alarm to show the upper and lower limit. The gauge can memory 10 test value and calculate the average of the memorized test value automatic. Converting three units N, kgf, lbf automatically. The data display can be changed the direction. Having set the normal measuring\peak hold\automatically peak switch can be used for peak hold test and normal measuring. Non- operation automatic power off, the power off time can be set from 1-60 minutes.
    Tester is equipped with a 60 watt powerful AC motor for automatic pull of test.
    Stops at pre determined upper lower limits and set speed of test or control Manual.
    This digital tester can be used for many other tests with the custom made tests methods for yarn, and paper tensile strength.
    50 Kg electronic fore gauge insure the précised test results for button snap and pull tests. Other large capacity Load cells are available per requirements.

    Test Stand Panel

    Power button: control the whole machine’s power on and off.

    Up button: the button shines when up (or left move), turn off when stop.

    Down button: the button shines when down (or right move), turn off when stop.

    Stop button: stop movement.

    Speed governing button: govern the moving speed.

    Speed display window: display the setting moving speed at the present time.

    Mode shift: shift test mode, shift during the test mode A (cycle) and M (manual).

    Mode state pilot lamp: light on is test mode A (cycle); light off is test mode M (inching).

    Time window preset: display cycle test time setting at the present, the range is 1-9999 times.

    key: character position of moving test times window.

    Accumulation key: increase the number in the times window preset, increase “1” when press the key one time.

    Minus key: minus the number in the times window preset, minus “1” when press the key one time.

    Test time window: display the run times before (“1” time when touch PLU validly).

    Zero setting key: setting the running times to zero

    Key Display Software graph

    LCD Display High accuracy, high resolution

    Setting upper and lower limit. The gauge will auto compare the sample.

    The result is indicated by red ,green lamp and alarm with Buzzer

    Indicate the direction of force

    The blue background illumination can be chosen.

    Memory 10 testing data, and calculate the average automatically

    Three units N, kgf, lbf and convert between the three units automatically

    Indicate the max value, minimum value, and average value, eligible and unqualified value.

    Peak holding function, and the hold time can be set from 1-10 seconds.

    Can print 10 unit test data

    Power off time (1-60 minutes) can be set by operator.

    RS-232 output can be connected to computer to show the force curve, and to connect the printer.

    The voltage required for tester is: AC 220V, 50Hz

    The motor power/wattage is: 60W.

    Dimension of the package is L*W*H(mm): 510*430*1630 by wooden box.

    Package weight ~58 Kg

    Comparison of attachment / clamps with SafGuard button pull tester Every one has is own code/name but function is same

    SafGuard code & name SH Digital Tester code & name
    STA-007 Upper Long Nose Vise Grip Vigrous Pliers Clamp
    STA-0041 Upper Universal Grip Female Button Clamp
    STA-0002 Upper Stud Grip Male Button Clamp
    STA-0042 Lower Fabric Clamp Pedestal Clamp
    STA-0006 Lower Grasp Button Accessory Kit Accessory Kit
    STA-0004 Calibration Weight 15LB Calibration Weight 15LB
    STA-0005 Upper Grasp Button Grip Two-jaw Clamp (a little different on shape

  • Horizontal & Vertical Lab Padder $2,688.00

    APPLICATIONS:

    Adjust to the same pick up with bulk production and provide precise pressed dyeing or resin prescription To check the color shade change and to further avoid it happening during resin finishing or heat setting processes after dyeing. Application tests of water repellent, flame retarding and other coating tests special features.

    SPECIAL FEATURES:

    1. Constant nip pressure can be kept due to pneumatic design
    2. The left or right side pressure of padding roller can be independently adjustable to the required one.
    3. Easy to operate once you set the required padding nip pressure no other re‐adjustment will be needed.
    4. Safety devices include a fabric feeder, safety rod, emergency button and a knee pedal to make sure the safe operations at every test.

    SPECIFICATION:

    1.  One pair of padding rollers made of N, B, R, rubber material of 70°shore hardness
    2.  Rubber roller diameter 125mmφlength 450 mm
    3.  Driven by 1/4 hp motor with speed reducer (voltage & hertz to be specified)
    4.  Revolving speed is 0‐10m/min (variable frequency speed control)
    5.  Two pressure gauges 0~5kg /cm2
    6.  Two pressure regulating valves (precision 0.1 kg /cm2)
    7. Air compressor is excluded.

    Technical Parameter:

    Model P‐A Vertical type P‐B Horizontal Type
    Dimensions 85×56×140CM 85×56×140CM
    Power 380‐400 VAC, 50Hz 380‐400 VAC, 50Hz
    Net Weight: ~120 KGS ~120 KGS
    Shipment weight: ~210 KGS ~190 KGS
    Shipmen Dimension: ~100*75*145CM ~95*75*120CM
  • HTA Jet Dyeing Machine $16,620.00

    HTA laboratory fabric dyeing machine providing the reliable basis for dyeing at reduced bulk costs.
    This machine is ideal for the wet processing of narrow woven and knit fabric samples made from natural and
    man-made fibers and blends.

    Operating at temperatures up to 140ºC at a min. liquor ratio of 1:5 depending on the type of fabric and fiber.

    The machine is designed for research and development, quality assurance and laboratory trials. A high level of
    reproducibility and similar liquor ratio allowing transfer of results from lab to bulk.

    Adopt the thickness adjustable structure to protect the blade and pad.

    It use cork pad, not rubber pad.

    Technology parameters of parts:
    Main cylinder parts : Made of high corrosion resistant stainless steel materials. Door cover is stainless steel plate, bolt structure.
    Cloth storage area: Single cloth operated, Go smooth cloth
    Carry cloth system: made of stainless steel, the cloth runs without bruising.
    Out the cloth system: The wheel and gear motor frame made of stainless steel with a cloth.
    Guide cloth tube: Full immersion structure.
    Into the drainage: Single into a single row.
    Water level meter: Magnetic page layout with low water level protection control.
    The cloth rack: Made of stainless steel.
    Feet: Stainless steel materials.
    Charging bucket: made of stain less steel.
    Feeding system: with stainless steel feed pump and proportional valve, quantitative feeding precise control.
    Heat exchanger: stainless steel shell and tube heat exchanger, heat exchange area is large.
    The main pump is made of stainless steel plate mould pressure pump body. It has high corrosion resistance
    and sealing performance. It is not the hidden danger of shrinkage cavity and leakage of the pump shell, and it is durable.
    Valves: stainless steel pneumatic / manual dual purpose ball valves are used for inlet / drain, Using pneumatic
    diaphragm valve into steam, inlet and outlet cooling water ado pts pneumatic stainless steel shut-off valves,
    Drain valve adopts pneumatic stainless steel ball valve, and other valves adopt stainless steel clip valves.

    Hydrophobic: pour drum hydro phobic, environmental protection and energy saving.
    The main pump, guide wheel frequency control; frequency converter using the Sino-US joint venture the frequency conversion.
    High temperature resistant stainless steel metal paint spraying machine appearance, all with high precision stainless steel parts cloth contact surface polishing treatment, no cloth, nap.
    Fully time-temperature profile, dosing of dyes and chemicals.

    Electrical control system:
    With large screen touch screen PLC control, the picture is clear and bright, the precision of
    Temperature control is high and the operation is convenient. The whole process is completed
    Automatically by the temperature control system, Digital setting of technical parameters of touch screen.
    Temperature curve and automatic control of dyestuff
    The electric cabin et control box, is made of the stainless steel material, is made of and the exterior is sprayed
    with the stainless steel high temperature resistant metal paint.

    Main Technical Parameter:
    The machine form: Walking on horizontal cloth, jet overflow single-channel cloth
    The max. Capacity of fabric: 10k g
    The small quantity o f cloth: 1-5kg
    The highest working temperature: 140℃

  • Hydrostatic Head Pressure Tester $4,125.00

    This machine is used to determine not only the fabric hydrostatic pressure resistance, but also the hydrostatic pressure proof performance of the coating materials.

    Standards: ISO-811, AATCC 127, BS EN20811, ISO 1420

    Features:

     Microcomputer control, English LCD menu, four built-in test methods .

    The built-in tank design, creative balance system of water pressure rate, rising speed stability and accuracy.

    Clamp made of stainless steel, equip LED light to view specimen clearly

    Testing Methods:

    Turbocharged  Constant pressure time

    (It means at the constant pressure, how long can appear the first water drop on the specimen)

    Constant pressure regularly (It means at the constant pressure and specify time,

    if can appear water drop on the specimen).

    Leakage water method

    Technical Parameter:

    Testing range: 0.5kpa-200kpa

    Accuracy: 0.2%F.S

    Elevation Speed: 1kpa-30kpa

    Clamp Area: 100cm2

    Testing Units:(pa  mmHg     cmH2O)

    Power: AC 220V 50Hz

    Dimension: 550x400x500mm

    Weight: 55kg

  • Infrared HT Dyeing Machine $4,187.00

    Use: Suitable for high temperature (or normal temperature) dyeing, washing, dry-cleaning and samples colorfastness test.

    Applied Range:

    Suitable f or all kinds of yarn and fabric dyeing experiments, especially for N, N/C, T/N and other kinds of knitted and woven cloth, spandex lake, have better levelness and reproducible.

    Features:

    With internal heating type silicon carbide heat conduction, to avoid the old infrared machine with heat conduction oil as heat carrier inflammable and explosive fatal flaw.

    Use stainless steel infrared heater, compared with the external heating infrared glass lamp life long, long time.

    Without glycerin, lampblack pollution; Due to the adopted high-power air cooling system, and therefore there is no loss of cooling water;

    Heating power is only 1/3 of the traditional oil heat infrared machine, and heat preservation, constant temperature effect is good, save water, electricity, etc Line costs.

    Programmable LCD computer installations, a variety of expressions, real time monitor the working state of the curve of the test process and relevant operation.

    Adopts frequency conversion control, adjustable rotary speed, better co operate with the scene of the production process works.

    To adapt to different kinds of fabric and dyeing processing, the method of general configuration routine for 24 cups of 300ml.

    Technical Parameter:

    1. Number of steel cup: 24
    1. Dyed cup material: stainless steel 316 l a stretch forming.
    1. Cup specification: 300 ml.
    1. Rotational speed: 0-45 rpm
    1. Operating temperature : room temperature to 14 0 ℃.
    1. Temperature control precision:±2℃
    1. Heating rate: 0.5 – 33 ℃ / min (full cup slightly lower, about 3 ℃ / min)
    1. Cooling: forced air cooling.
    1. Heat conduction medium: carborundum.

    10 . Power specifications: 110V, 60Hz, Single phase

    11 . Dimension : 750mm * 7 75mm * 775 mm (long * deep * high).

    12 . Machine weight: about 195 kg.

  • Jigger Dyeing Machine $12,125.00

    Jigger Dyeing Machine is suitable to test the dyeing of cotton and linen cloth, viscose, man-made fiber, etc., and suitable for dye material, such as direct dyes, acid dyes, basic dyes, insoluble azo dyes, and reactive dyes, etc. This apparatus can achieve bleaching and dyeing with low-liquor ratio, simulates as nearly as possible the mechanism of production jigs.

    Jigger Dyeing Machine is specially designed to satisfy the requirements of testing dye formula before quantity production of dyeing and finishing enterprise. This apparatus simulates as nearly as possible the mechanism of production jigs’ requirements of speed, temperature, pre-tension, etc. of real production process. Compared with production machine, this Laboratory Jig Dyeing Machine’s size is smaller, consumes small quantity of dye, and with short testing process, so operator is easier to change dye formula, and finds suitable dye formula in a short time. Therefore this machine is well welcomed by many dyeing and finishing enterprise

    Manual Operation Mode Interface

     Technical Parameter:

     Control Mode: Touch Screen+ PLC

     Effective Roller Width: ≤500mm

     Roller Diameter:  F 57mm- F 200mm

     Cloth speed :0.5-8m/min +/- 0.001 m/min

     Temperature Range and accuracy: Room Temperature -98℃+/- 2℃

     Temperature Ratio: 1-3 ℃

     Tension: 0-18kgs

    Material tension control mode: the difference speed between A and B roller.

     Cooling: automatic water cold system

     Power: AC 380V, 50Hz

  • Lab Coater Electronic & Mechanical $0.00

    The Lab Coater is the optimum combination of dryer and laboratory coating table. Various kinds of material samples are coated in the same run by the coating device and heat-treated in the dryer.

    The coating is applied either by a floating, roller or rubber blanket knife. Multiple coatings which do not require reloading are also possible.

    Technical Parameter:

    Max. Coating area : 300x400mm
    Coating thickness: 0-5mm,
    Resolution ratio: 0.01mm

    Electric coating, coating speed: 0-4m/min, double direction adjust speed (Electronic model has this function)

    Removable pin frame, the pin frame can be put into the oven with the textile when coated.

  • Laboratory PAD Steamer $0.00

    Suit able for saturated steam, the time for sample cloth from the tank through t he roll into the steamer is very short, to avoid vulcanization and Shilling dyes are air-oxidized before react, provide the best reproducibility and stability.

    1. Stagger in the steamer time to stay at least 20-120 seconds, can adapt to the different thickness of cloth, widely used.

    2. The whole machine is exquisitely designed, which does not occupy more space than the traditional type.

    3. The required guide cloth is short, easy to operate.

    4. The machine is made of high-quality stain less steel S US304.

    5. With mechanical break.

    6. 350 mm working width.

    7. 1.5 liter impregnation tough capacity.

    8. Pneumatic pressure system with cylinders by nitrile rubber with 70 +/- 3 shores A.

    9. Dimension of roller: diameter: 126mm, length: 350mm

    10. Pressure method : pneumatic, pressure:1.0 kg/cm²-5 .0 kg/cm²

    Steamer Parameters:

    A. Use temperature: saturated steam temperature ( max up to 105℃)

    B. Steam: extern al connect inlet DN15. Max 5kg/cm2 s team in, 5kg /hour indirect steam,

    C. 15 kg/hour direct steam.

    D. Test cloth path: Entire 6 meters, through time 20-120 seconds, frequency control.

    E. Temperature indication: dig ital

    F. Inlet seal: air seal type.

    G. Outlet seal: water seal type.

    H. Dimension: 1400×1800×90 0mm

    I. Weight: 280 kg

  • Laboratory Yarn Package Dying $0.00

    It is mainly used for dyeing, boiling, bleaching and washing processes such as cotton, wool and chemical fiber, and also for dyeing of small batch of cloth.

    The dyed fabric in dyeing tank, heated dye, circular flow circulating pump and steering mechanism of compulsory membership continuously alternating dye dye, t he dye in the process of a given temperature and time to reach the purpose of uniform dyeing. All parts o f the body and the dye and contact are corrosion-resistant stainless steel.

    1 Features:
    1) This ma chine has compact structure, small bath ratio, PLC with touch screen control, automatic control of the whole process flow and high degree of automation, batch storage of all inputs/out puts.
    2) Circulating: the corrosion of mixed flow pump with reversing device, according to the liquor circulation process.
    3) Slot seal form: use silicon rubber O seal ring .
    4) Equipped with pneumatic valves, main cylinder and flip plate level controller, equipped with safety interlocking mechanism, main cylinder is equipped with stainless steel safety valve, manual opening and temperature control, it can set 85 degrees of safety protection.
    5) The dye reversing control, computerize automatic changeover control.
    6) Temperature control system: large screen touch screen PLC control, flexible and
    convenient operation system, digitalization of process Parameters, and high degree of automation. Modern information network can b e used to realize remote diagnosis and troubleshooting.
    7) Process flow: the whole process flow only needs to be finished manually. Other operations are automated in accordance with the process setting process. The following are: inlet, c all, yarn entry, start up pu mp, chemical feed, ratio feed, temperature rise, s hut down pressure relief valve, temperature drop, opening pressure relief valve , turn off pump, drainage , water inlet , circulating water washing, chemic al barrel cleaning, drainage, and call out.
    8) VAT material: use 316L stainless steel sheet production .
    9) High temperature/high pressure package, suitable for 1- 6 packages with diameter 20cm, positive displacement pump, flow reversal, constant static pressure control during dyeing, additions tank, high temperature drain.

    Technical Parameter:
    1. Maxim um working capacity: 6kg
    2. Minimum working capacity: 3kg
    3. The highest working pressure: 0 .40MPa
    4. Design the highest pressure: 0. 5MPa
    5. Maxim um working temperature: 140 centigrade
    6. Working medium: D ye
    7. Bath ratio: 1:6 to 1: 15
    8. Power supply: 380V , 50HZ
    9. Main p ump motor power: 3KW
    10. . Water intake and discharge: D N20 ball valve
    11. Form of heating: electric heating
    12. Machine size: L x W x H:125 0 x 800 x 18 80mm

  • Launderometer Washing Fastness Tester $3,500.00

    The Launderometer (washing fastness tester, called different names as (Gyrowash, Rotawash, Dynowash), to determine color fastness to washing or dry cleaning to washing fastness methods, it complies with ISO, BSI, AATCC and Marks& Spencer standards.

    Feature:

     Available in different sizes such as portable washing fastness tester, etc. The washing fastness tester uses stainless steel rotor to holds washpots on each of four sides and rotates at a constant 40 rpm (+/-2 rpm). Washpots are preheated in appropriate test solution, structure wholly made of very strong stainless steel.

    Color touch screen display and PLC control, containers are sealed with either a Neoprene rubber gasket or optional Teflon gasket.

    Small and large test vessels are interchangeable so they can be placed in every position.

    This allows operators to test to both ISO (European) and AATCC (American) Standards with ease.

    To offer a reliable and safe washing fastness test, Washing fastness tester equipped with water-lacking alarm, protection device when opening door, Test-finished alarm, Automatic shutdown with audible warning etc, electric drainage function is optional.

    Standard: ISO105 C01-C06, M& SC4A. 5.37. P3B, IWSTM 7.115.177.193.240, 241, AATCC 2, 3, 28, 61, 62, 86, 132, 151, 190, FTMS 191-5610/5622, BS 1006, NEXT

    Technical Parameter:

    Rotation speed: 40+/-2/rpm

    Quantity of positions: 8, 12, 16, 20 depend on customer’s request

    Size of ISO washpot: 550ml   75mm dia x 125mm(3.0 in x 5.0in)

    Size of AATCC washpot: 1200ml 90mm diax 200mm(3.5 in x 8.0in)

    Temperature : Max 95℃   Adjustable

    Running time: Adjustable

    PACKING LIST:

    No. Name Quantity Remark
    1 Washing Fastness Tester 1 set Main body
    2 550ml Container+Vessles 1 Set Optional
    3 1200ml Container+ Vessels Optional
    4 Stainless Steel Balls 50 Pcs For each pot
    5 Stainless Steel Discs 1 Pc For each pot
    6. Electric Drainage Function 1 Pc Optional
  • Locus Circular Tester $0.00

    Locus Circular Tester is used for testing pilling of all kinds of fabrics in circle track trough active friction system; .

    fabric is rubbed against a nylon brush and abrasive or an abrasive only under controlled conditions.

    Results of the test are achieved in minutes. The relative motion of the locus specimen grip and the abrasive platform
    is a circle with a relative speed of 60+/-1 r/min.

    The grip offers pressure to the specimen which is adjustable with a tolerance of +/-1%.
    For added control and safety, the machine is equipped with a self-stop switch.

    Standards: GB/T4802.1, DIN5386.2-1997

    Technical Parameter:

    Motion Track

    Circular 40mm

    Movning Speed

    60r/min

    Brush Height

    2-12mm

    Sample Pressure

    490CN, 590CN,780CN

    Counting Range

    1-99999

    Dimension

    550×260×385mm

    Weight

    31Kgs

    Power

    220V, 50Hz

     

  • Locus Circular Tester $1,687.00

    Locus Circular Tester

  • LVDV-2 Viscometer $2,775.00

    DESCRIPTION:
    Used for Inks Latex Adhesives dyes and chemicals (Solvent base) Polymer Solutions Oils Paints and Coatings Solvents Cosmetics Dairy Products Pharmaceuticals Juices, etc

    Digital instrument for the measuring of viscosity with all data reading on display, serial , output RS-232C to connect a PC, DV-Loader software and analogical output 0-1 Vdc. Intermediate model ready to use PC for data process. Full interchangeable to Brookfield accessories range. The LCD display shows simultaneously: viscosity in cP or mPas, torque %, rpm, installed spindle, temperature in °C or °F, shear rate, shear stress.

    Display information: Viscosity (mPa.s), Temperature: C , Speed/Spindle, Shear Rate/ Stress,

    Built in option: Timed tests, Choice of speed, RTD temp probe
    Speed selection: Appropriate rg of speeds with easy selection
    Accuracy: ±1.0%of rg
    Repeatablity: ± 0.5%
    Auto Rg showing: Full scale rg, Max viscosity measured,
    Spindle/Speed Combination
    Complete set of LV spindle
    DV Loader software
    DV gather and analysis software
    RTD temp probe
    Operation manual

    Feature:
    DV Gather Software is used to get total control of your instrument and test parameters
    Shear Rate/Stress With Special Spindles
    Bi-directional RS-232 PC interface
    Configurate RTD Temperature Probe
    Stepping Motor means Accurate, reliable operation
    Direct readout of all measurement parameters
    Auto Range Showing
    Time Function for measurement
    Sound alarm at under 20% Torque
    Linear calibration
    Wide range power supply:100V-240V
    Technical Parameter:
    Range: 6-6,000,000 (mPa.s)
    Speed: 0.1- 200rpm
    Spindles: L1, L2, L3, L4
    Accuracy: ±1 %(FS)
    Repeatability: ±0.5%
    Power: 100-240V, 50-60Hz

  • Manual Crock Meter $362.00

    Manual Crock meter is used for testing the fastness to dry or wet rubbing

    and the fastness to brushing of all kinds of colored textiles, digital display.

    Standards: ISO105-X12, D02, Bs1006 D02, DIN54021, IWS Tm165, JIS K6328. AATCC8/165

    Technical Parameter :

    Testing times 1-99999

    Rubbing travel 104±3mm

    Rubbing speed Manual

    Rubbing pressure 9N

    Rubbing head Roundness :ф 16mm

    External Dimensions 620*160* 230mm

    Optional Accessories:

    AATCC crocking clothes 1Box (1000Pcs)

    ISO Grey Scale

    AATCC Grey Scale.

  • Martindale Abrasion and Pilling Tester $3,812.00

    Introduction :

     Application scope of XHF-05 Martindale Abrasion & Pilling Tester : suitable for the wear-resistance and grinding test under certain pressure of woven and wool-blend fabrics, Leather, knitted goods and non-woven fabric

     Standards:  ISO5470, IWS TM112/196, DIN53863/53865, BS3424/5690, BS EN 388/530, JIS L1096, ASTM D4966/4970 , ISO17079-2, ISO 12947, ISO17704, ISO 20344, ISO 17076-2, SATRA TM31 and so on.

    Features of touch screen Martindale:

     1.Machines with two Lissa-jous trajectory.

     2.Using color touch-screen operation, PLC control, each working position can be controlled separately.

    1.  Motor overheat protection, convenient operation.
    2.  There is a alarm when the test is finished.
    3.  Data can be restored after the power failure.

    Technical Parameters:

     Work-station number : 6 or 9 pcs

    Counter display : Pre-set counter display: 0-999999

    Cumulative counter display: 0-999999

             Abrading table diameter : 120mm

    Test pressure (abrasion test)

    A:  cloth specimen clamp:198g +/- 2g

    B:  textile specimen hammer:395g +/-2g (Equal to 9Kpa)

    C: furniture deck specimen hammer:594g +/-2g (Equal to 12Kpa)

    Pressure test (pilling test)

    A:  cloth specimen clamp:155g +/-1g

    B:  textile specimen hammer:260g +/-1g

    Weight of Load hammer: 2385g +/-10g

    Dimension: 850mm\ x 600mm x 400mm

    Weight: Machine 120kgs Accessories box: 22kgs Voltage supply:220V/110V, 50HZ/60Hz

    Packing list

    No. Name Quantity Remark
    1 Abrasion tester 1 Main body
    2 Pin Shaft 6 or 9
    3 Hammer 1
    4 Lissa-jous trace pen 1
    5 Dia 140 sample cutter 1
    6 Dia 38 sample cutter 1
    7 Dia 90 sample cutter 1
    8 Weights 12 or 18 395g, 594g each 6 pcs
    9 Specimen clamps 12 or 18 dia38mm, dia90mm each 6 pcs
    10 Abrasion table 6 or 9
    11 Specimen fix ring 6 or 9
    12 Rubber rings 12 or 18 For installing dia90mm specimen
    14 Load disc 6 or 9
    15 Accessories Case 2 Aluminum-Alloy Case
  • Multipurpose Flammability Tester $4,412.00

    Multipurpose Flammability Tester automatically determine the flammability resistance to a vertical flame of apparel fabrics, protective fabrics, curtains and children’s sleepwear.

    Standard: BS EN ISO 6940, EN ISO 6941, BS 5438, EN ISO 15025

    Technical Parameter:

    Ignition of the time range:0-99.99S

    Precision: 0.01S

    Continued burning time:0-999.9S

    Ignition fire mouth: According to ISO 6941 Standard

    Fire Mouth angle: 0°/30°/90°(Adjustable)

    Flame Measurement Height: 20mm/40mm

    Dimension inside U clamp: 80mmx600mm

    Mark line on U clamp: adjustable

    Dimension:800mmX550mmX660mm

    Weight: 50kgs

    Power: AC 220V/110V

  • Oscillating Dyeing Machine $1,225.00

    This machine is suitable for dyeing in common temperature (20℃-100℃)

    and the operation is simple. Neutral alkali, salt and other additions can be softly added during the process of dyeing.

    It also applies to the cotton bath, soap and bleached experiment

    Features:

    Equip imported motor with large Angular moment from Taiwan.

    The shell is made of stainless steel S.S304 material

    Programmable Temperature controller and PT-100 probe

      Technical Parameter:
    Number of Beaker: (24Cups)
    Beaker Specification: 250cc Triangular Glass Beaker
    Oscillation Speed: 30-200 reciprocation/min

      (shaking from right to left)
    Temperature Range: Room Temperature – 100℃
    Heating: Electrical Heating
    Power Supply: 4kw, AC220V, 50HZ
    Overall Dimension (L*W*H): 106*55*72c m
    Included: 250cc Triangular glass Beaker

  • Peel Bond Strength Tester $120.00

    Introduction:
    1. To determine the strength requires to separating fabric with interlining / fusing.
    2. It can give repeatable and accurate results.
    3. Optional: Long Gripper is provided to hold the test specimen accurately.
    4. Can be used vertically and Horizontally
    5. CE certified Electronic Gauge
    Peel test or adhesion testing is the measurement of the adhesive or bond strength between two materials. It is performed by applying a tension load to the materials on one of three different ways:
    • Pulling two flexible materials axially away from each other forming what is called a ‘T’ peel
    • Material or substrate, both held vertically, forming what is called a 180 degree peel
    • Material or substrate, which is held horizontally, forming what is called a 90 degree peel
    Features:
    1. Digital Gauge 10 kg -10g (20 & 25 Kg Available)
    2. Kg to Lb unit conversion facility
    3. Sensitivity 1%
    4. Large LCD Display
    5. Auto peak hold, Tar button
    6. Long Battery Backup-More than 100 hrs
    7. Auto Power off for saving batteries after 20 seconds
    8. Screen back light On / Off control

  • Perspiration Tester $412.00

    The perspiration tester is to determine color fastness to water, perspiration fastness in textiles

    Standards:
    Perspiration : AATCC 15 , EN ISO 1 05 E04 , DIN 54020 , JIS L0848 , BS 1006 E04 Water : AATC C 107, EN ISO 105 E01 , DIN 54006 , DIN54005 , JIS L 0846 , BS 10 06 E01

    Sea water : AATCC 106 , EN ISO 105 E02 , DIN 54007 , JIS L0847 , BS 1006 E02 Application :

    It is to deter mine color fastness test t o water, sea water, perspiration fastness in textiles and sublimation during storage. Perspiration tester consists of a stainless steel frame with 21 acrylic separator plates to hold 20 samples. An electric precise oven is required.

    Test Procedure:

    Treat the composite sample with synthetic perspiration, sea water or water. Place the perspiration tester with 20 samples which held between plates under a given pressure by standard loading weight into an oven for a requested time at a requested temperature.

    Compare the degree of fading and pollution of attached white cloth with gray scale, and appraise the perspiration color fastness

    Technical Parameter:

    AATCC Count Weight: 3.63kg (8LB)

    ISO Count Weight: 4.08 kg (9LB)

    Laminate w eight: 0.90kg (2LB)

    AATCC acrylic separator plates: (22 Pcs)

    ISO acrylic separator plates: (21 Pcs)

    Weight: 8 K g

    Dimensions: 420mm*15 0mm*300 m m(LxWxH)

  • Pneumatic sample cutter/ Punch cutter $0.00

    Pneumatic sample cutter is used to cut many kinds of sample and it is suitable for lab to cut

    textile, rubber, plastic, leather, paper and so on.

    Feature:

    Using high pressure air source, with all kinds of high steel die mold, solves the problem of time-consuming of cutting sample, quickly and effectively to ensure the smooth progress of the perfect all kinds of tests and sample reliable, provided with automatic sample ejection and safety 2 botton operation. Cutting die is not included, special shape dies aviailable on application.

    Standard: ASTM D3776, ASTM D2646, BS 3424, BS 2471, BS EN12127, ISO 3801, M&S P65, M&S P65A….etc.

    Cutting dies is designed according to customer’s specimen dimension.

    Packing list

    No. Name Quantity Remark
    1 Pneumatic Sample Cutter 1 Pc Host Machine
    2 Cutting Dies 1 Pc Optional

  • Random Tumble Pilling Tester (2 chamber) $2,687.00

    Random Tumble Pilling Tester. To determine the pilling and fuzzing characteristics of textile, fabrics. Stainless steel impellers rotate within individually lit aluminum chambers constantly tumbling test fabrics against cork liners for a pre-determined time controlled by a timer andaudible alarm. With 2 or 4 test chambers. Laboratory standard compressed air supply required.

    XHF-03C-1 Randum Tumble Pilling Tester-2 test chambers

    XHF-03C-2 Randum Tumble Pilling Tester-4 test chambers

    Standards: ASTM D3512, DIN 53867, JIS L1076

    Technical Parameter :

    Rotating speed: 1200rpm

    Size of Testing Cylinder: Diameter146mm, Depth:152mm

    Sample Dimension: 105mmx105mm

    Dimensions: 400x390x515mm (LxWxH), 420x55x570mm(LxWxH)

    Weight: 31kg, 65kg

    Original Accessories: SDL Cork Liners 50Pcs/Pack

    Cotton Silver 1 Yarn

    Photographic standards card 5Pcs/Set

     

  • Random Tumble Pilling Tester (4 chamber) $3,250.00

    Random Tumble Pilling Tester. To determine the pilling and fuzzing characteristics of textile, fabrics. Stainless steel impellers rotate within individually lit aluminum chambers constantly tumbling test fabrics against cork liners for a pre-determined time controlled by a timer andaudible alarm. With 2 or 4 test chambers. Laboratory standard compressed air supply required.

    XHF-03C-1 Randum Tumble Pilling Tester-2 test chambers

    XHF-03C-2 Randum Tumble Pilling Tester-4 test chambers

    Standards: ASTM D3512, DIN 53867, JIS L1076

    Technical Parameter :

    Rotating speed: 1200rpm

    Size of Testing Cylinder: Diameter146mm, Depth:152mm

    Sample Dimension: 105mmx105mm

    Dimensions: 400x390x515mm (LxWxH), 420x55x570mm(LxWxH)

    Weight: 31kg, 65kg

    Original Accessories: SDL Cork Liners 50Pcs/Pack

    Cotton Silver 1 Yarn

    Photographic standards card 5Pcs/Set

     

  • Random Tumble Pilling Tester Touch screen (2 chamber) $3,337.00

    Random Tumble Pilling Tester. To determine the pilling and fuzzing characteristics of textile, fabrics. Stainless steel impellers rotate within individually lit aluminum chambers constantly tumbling test fabrics against cork liners for a pre-determined time controlled by a timer andaudible alarm. With 2 or 4 test chambers. Laboratory standard compressed air supply required.

    XHF-03C-1 Randum Tumble Pilling Tester-2 test chambers

    XHF-03C-2 Randum Tumble Pilling Tester-4 test chambers

    Standards: ASTM D3512, DIN 53867, JIS L1076

    Technical Parameter :

    Rotating speed: 1200rpm

    Size of Testing Cylinder: Diameter146mm, Depth:152mm

    Sample Dimension: 105mmx105mm

    Dimensions: 400x390x515mm (LxWxH), 420x55x570mm(LxWxH)

    Weight: 31kg, 65kg

    Original Accessories: SDL Cork Liners 50Pcs/Pack

    Cotton Silver 1 Yarn

    Photographic standards card 5Pcs/Set

     

  • Random Tumble Pilling Tester Touch screen (4 chamber) $3,337.00

    Random Tumble Pilling Tester. To determine the pilling and fuzzing characteristics of textile, fabrics. Stainless steel impellers rotate within individually lit aluminum chambers constantly tumbling test fabrics against cork liners for a pre-determined time controlled by a timer andaudible alarm. With 2 or 4 test chambers. Laboratory standard compressed air supply required.

    XHF-03C-1 Randum Tumble Pilling Tester-2 test chambers

    XHF-03C-2 Randum Tumble Pilling Tester-4 test chambers

    Standards: ASTM D3512, DIN 53867, JIS L1076

    Technical Parameter :

    Rotating speed: 1200rpm

    Size of Testing Cylinder: Diameter146mm, Depth:152mm

    Sample Dimension: 105mmx105mm

    Dimensions: 400x390x515mm (LxWxH), 420x55x570mm(LxWxH)

    Weight: 31kg, 65kg

    Original Accessories: SDL Cork Liners 50Pcs/Pack

    Cotton Silver 1 Yarn

    Photographic standards card 5Pcs/Set

     

  • Rotary Crockmeter $465.00

    Rotary Crock Meter to determine the color fastness of textiles to dry and wet rubbing particularly for printer fabrics. Applies 1134g of pressure on a 16mm finger and rotates 1.125 turns clockwise then anti-clockwise. The operating handle is however turn in one direction only.

    Standards: AATCC 116;   ISO 105 X16

     Technical Parameter:

    Diameter of rubber head: Diameter of rubbing head: 16±0.1mm

    Turning of vertical pole: after turning1.125 circles then reverse

    Dimensions: 260×150×210mm

    Weight: 5kg

    Optional:

    AATCC crocking clothes 1Box (1000Pcs)

    AATCC grey scale

  • Sublimation Fastness Tester $1,362.00

    To determine color fastness to hot pressing and dry heat and to conduct sublimation tests. Providing controlled conditions of dry heat and pressure with top and bottom heated surfaces, electronic temperature controller and carefully controlled top plate weight.

    Standard: AATCC 92, 114, 117, 133, ISO 105, BS 1006, M&S C13

    Technical Parameter:
    Test stations: 3 groups
    Heating surface dimension: 40mmx100mm or customized
    Total number of pads: 6 heating pads, 2 for each heating station, with individual heating
    Range and error of temperature: room temperature -250℃
    Specimen dimension: 120mmX40mm
    Timer range : 0-9999S
    Temperature controller: set temperature, auto constant temperature control
    Power: 1000W
    Test pressure: 4±1KPa
    Dimension: (WxDxH): 410x310x170mm
    Weight: 14kg
    Power supply: AC220V±10%, 50Hz. 10A

  • Textile Bursting Tester 16A $5,875.00

    Used in a variety of textiles, non- woven fabric, leather and other materials, while force ( flexible diaphragm law ) in latitude and longitude and in all directions , expansion force and dilation of the performance measurement .

    Integrated safety shied
    Provided with a touch screen readout of pressure, time of burst, height of burst

    Big touch screen operation, also can use PC operation.
    High quality and renewable rubber diaphragms, manual griping device, and forward reverse and neutral drive system
    High quality AC servo motor driven

    Related standards : ASTM D3786, ISO 13938.1, BS 3424 (PT. 6), ISO 3033-B, EN 12332-2

    Features:
    Hydraulic pressure to 6000Kpa
    Quick change bells
    Diaphragm correction
    Automatic flow rate adjustment
    Software analysis for full results
    Distension measurement up to 70mm

    Technical Parameters :
    Capacity 0~6MPa (6000Kpa)
    Test Speed Adjustable, 20-800ml/min
    Bursting strength accuracy ±0.5%FS
    Hydraulic fluid glycerin with concentration 85%

  • Textile Bursting Tester 16C $10,000.00

    Used in a variety of textiles, non- woven fabric, leather and other materials, while force ( flexible diaphragm law ) in latitude and longitude and in all directions , expansion force and dilation of the performance measurement .

    Integrated safety shied
    Provided with a touch screen readout of pressure, time of burst, height of burst

    Big touch screen operation, also can use PC operation.
    High quality and renewable rubber diaphragms, manual griping device, and forward reverse and neutral drive system
    High quality AC servo motor driven

    Related standards : ASTM D3786, ISO 13938.1, BS 3424 (PT. 6), ISO 3033-B, EN 12332-2

    Features:
    Hydraulic pressure to 6000Kpa
    Quick change bells
    Diaphragm correction
    Automatic flow rate adjustment
    Software analysis for full results
    Distension measurement up to 70mm

    Technical Parameters :
    Capacity 0~6MPa (6000Kpa)
    Test Speed Adjustable, 20-800ml/min
    Bursting strength accuracy ±0.5%FS
    Hydraulic fluid glycerin with concentration 85%

  • Thermal Conductivity Tester, Tog Tester $25,000.00

    Thermal conductivity tester, to determine the tog, clo, thermal conductivity of various fabrics, quilting products, and other heat insulation materials. Microcomputer controlled, data processors and quality temperature sensors are used, ensures high test speed and precise test result. All performances of the sample (Include thermal conductivity, tog value, clo value) can be directly calculated. Test data and result is displayed on the large LCD display, and can be stored or printed out.

    Standards: ASTM D1518, JIS L1018, ISO 11092

      Main technical parameters:

    1. Heating Plate Temperature Adjustable Range : 20-50°C

    2. Range of Pre-heating Time: 0-99 Minutes

    3. Cyclic heating period setting range: 1-9 times

    4. Testing times: 1-9 times

    5. Resolution of Temperature: 0.1°C

    6. Parameters of heating plate: Testing plate 40W, Guard plate 120W, Base plate: 40W

    7. Dimension of testing plate: 250×250 mm

    8. Dimension of testing platform: 510×51×640 mm

    9. Dimension of controller: 300×345×150 mm

    10. Power: AC 220V±5%, 50Hz 30W

  • Vertical Tent Flame chamber $2,525.00

    The Vertical Fabric flammability tester is used for testing trend of after flame, flame retardant and carbonization of camping tentage.. It is automatically determine the flammability resistance to a vertical flame of camping tentage.

    Characteristics:

    1 . Use PLC touch screen control

    1.  Electric automatically burner, light clocking set freely from 0-999.9s.
    2.  Burning chamber is stainless steel.
    3.  Flame height can be adjusted
    4. Automatically burner orientation

    Standards: CPAI 84 Flammability Test Method Wall and Top Material

    Technical Parameters :
    Vent Holes Top 16 pcs, Two sides, each 6 pcs, diameter: 13mm
    Time range and accuracy 0.0-999.9S, resolution 0.1S (adjustable)
    Burner Inner diameter: 5mm, barrel: 75mm
    Distance between burner and 20mm
    specimen
    Flame Height 38mm (adjustable)
    Ignition time in test 12S (adjustable)
    Specimen Size 300x70mm
    Inner dimension of clamp 360x50mm
    Load weights 50g, 100g, 200g, 350g
    Dimensions 600 x 400x850mm
    Weight 35kg
    Power source 110V/220V, 50Hz/60Hz
  • Water Vapor Permeability Tester $0.00

    Water Vapor Permeability Tester, To determine the resistance of textiles and textile composites (particularly action wear fabrics) to water vapor penetration. The Water Vapor Permeability Tester consists of 8 containers with water reservoirs, a standard permeable fabric cover, sample holder ring and precision drive system.

    Standard: BS 7209 , BS3424

    Technical Parameter:

    Inner dimension of container: diameter: 83mm, depth: 18.5mm

    Weight of container: 120-150g/ group (Contain water)
    Dishes: Aluminum, P.C.D 305mm
    Rotation speed: about 2r/min
    Testing Time: can be set

    Counter: LCD display, 0-9999h (Random Setting)

    Power: 220V, 50Hz

  • Sold Out
    Whirlpool Washing Machine 10.5 Kg $0.00

    This is the new Whirlpool Washing Machine with improved efficiency. This new top loading super capacity washer begins a whole new chapter in cleaning. It boasts a 10.5kg dry clothes tested tub, with the latest belt driven technology. Its quieter, more energy efficient and uses much less water. Most importantly, less moving parts than our competitors, and a history of the best service record in the industry. Whirlpool is the Leader in laundry products, and continues to come up with new and innovative ideas to make your life easier.

    Features:

    White Washer with White Control Panel

    New Sensing Technology – Series of spins prior to load start checks to balance load Electronic Control – Showing cycle status

    Push Start/Pause/Unlock Button

    New Lid Lock with light control – Allowing for higher spin speeds (lid locked during Fill, Agitate, Drain and Spin)

    Spray Rinse Feature – Fills out tub with water as it spins

    2 Spins Speeds – Max. 700 RPM, better water extraction

    White Porcelain Basket

    Xtra Roll Action™ Plus Dual Action Agitator

    Bleach and Fabric Softener Dispensers

    Fabric Softener/Extra-Rinse Knob

    Wide Open Solid Lid

    8 Cycles

    Out of stock

  • Xenon Light Fastness Tester $17,250.00

    Xenon light fastness tester is mainly used for test of the color fastness to light and weather fastness of all kinds of nonferrous, coloring textile; it can also be used for testing the color fastness and ageing of painting, pigment, paint, rubber, plastic, paper and other materials. It has high intelligence, high measurement and control precision, stable performance; and it also has touch screen which is graphic mark displaying, friendly interface, it also easy to operate.

    Standard: ISO105-B02/B04/B06 AATCC 16 JIS L0843 ISO 4892-2

    Feature:

    1. Using 3300W long arc xenon lamp, truly simulate daylight spectrum;
    2. Adopt high transmittance filter combination, using 95% of the transmittance of the filter and the filter

        cylinder, to achieve the same irradiance optical requirements of low power consumption,

        makes the instrument more energy saving and environmental protection

    1. Automatic compensating system (PATENT) control the Xenon Lamp Power.
    2. Large touch screen, indicate the condition of chamber at real-time, be able to presetting irradiance,

         temperature (BPT or BST, chamber), humidity  and plot dynamic curve of them.

    1. The operator simply selects the required test module and test standards;
    2. 6.  English user interface, diagram indicate condition of chamber, easy to use.
    3. 7.PLC control, powerful program and storage property, save the parameters when interrupt of power supply.
    4. Custom program capability and storage for additional user-defined tests.
    5. 9.Built-in diagnostics and warnings, automatic prompt when lamp or optical filters require changing.
    6. 1 Multi-position sensor to supervise working condition, temperature, humidity, fan, xenon lamp, and door to chamber, it makes device work properly and reliably.
    7. 1Adopt (PATENT) military transmission technology in order to prevent electronic parts aging because of wireless transmission.
    8. A test can be 1000 hours of continuous operation of quality assurance.

    Technical Parameter:

     Light source: 3300W air-cooled long-arc xenon lamp Life of lamp: 1000-1500 hours

     Chamber Temperature range: 25 ~ 50 C, accuracy: +/- 2 C

     Blackboard  temperature   range: 30-80 C   Accuracy: +/- 3 C

     Humidity range: 10 ~ 95% RH, accuracy: +/- 5%

     Irradiance: 0.60 ~ 2.01W/m2/420nm (340nm, 300~400nm, 300~800nm is offered on request), Digital set, automatic closed-loop compensation

    Control Accuracy of Irradiance: +/- 0.02W/m2/420nm

     Photoperiod: ≤1000h

     Spray cycle: ≤1000h

     Rotation speed of sample holder: revolution 5r/min

     Dimension: 1200 x 800 x 1720mm

     Weight: 213kg

    ITEM Unit QTY
    Light Fastness Tester Set 1
    ISO sample clamp (can double side Set 11
    place the specimen)
    AATCC sample clamp (can double Set 5
    side place the specimen)
    Black board thermometer Pc 1
    Black standard thermometer Pc 1
    Filter glass Pc 7
    Filter Canister Pc 1
    Filter component Set 1
    Upper air canister Pc 1
    Top tube Pc 1
    Blue Wool Optional SDC Brand
    Color Matching Cabinet Optional 1
  • Yarn Count Balance $875.00

    Yarn count machine works with textile electronic balance is a kind of intellectual measuring instrument with weighing, counting and other many functions. The product introduces imported Integrated circuit and enjoys stable and reliable performance, easy operation and accurate weighing and counting. As a kind of measuring instrument, it has been widely used by enterprises and scientific research institutions.

    Function:

    It has: g,oz,tex,Nm,Ne,D,g/m2kinds of the units to change. Select 1-10 pcs specimen measurement

    It can print the date, time, specimen length, each weighing value, calculated MIN (minimum), MAX (maximum), SUM (sum), AV (average), CV% (non-uniform rate). Overload malfunction indication.

     Working Condition:

    Working Temperature:                         0°~40°C

    Maximum Consumed Power:              3W

    Pan Size: Diameter 80mm

    Power Supply:     Adaptor    input -220V±10﹪, 50HZ±1HZ。Output- 9v,300mA

    Comparative Humidity:    50﹪~85﹪

    Range: 210g

    Accuracy: 1mg (0.001g)

    Standard Configuration: Balance, Printer, Calibration Weight

Close My Cart
Recently Viewed Close
Close

Close
Navigation
Categories