Ozone Test Chamber is used to determine the colorfastness of textiles
when it is exposed to ozone in the atmosphere at room temperature..

Features:
The instrument consists of a stainless steel experimental chamber and a fully enclosed gas circuit for the production of ozone by silent discharge. The entire ozone gas generated and captured is enclosed to ensure personal safety. Ozone aeration chamber: composed of ozone generator, fan, baffle, sample compartment.
Standard: AATCC 109, ISO 105 G03

 Download Brochure

To determine the color fastness of textiles to dry or wet rubbing.

A pinned acrylic sample holder ensures rapid sample mounting and repeatability of results. Fitted with a pre‐determined electronic counter for strokes up to 9999,

Standards: ISO105‐X12, D02, Bs1006 D02, DIN54021, IWS Tm165, JIS K6328.

Technical Parameter:
Testing Time: 1‐99999
Rubber Travel: 104/100mm (Can be adjust)+/- 3mm
Rubbing Speed: 60r/min
Rubbing pressure: 9N
Rubbing Head: Roundness:φ16mm
Dimension: 600mm x 225mm x 270mm
Weight: 11kgs
Power Source: AC 220V, 50Hz

Accessories:
Rubbing clothing 1 (box)
Sand paper 2 (pcs)
Rings 2 (pcs)

Analogue Peel Bond Tester To determine the strength requires to separating fabric with interlining -fusing. Can give accurate results. Can be used vertically and horizontally Certified measuring Gauge

Peel test or adhesion testing is the measurement of the adhesive or bond strength between two materials. It is performed by applying a tension load to the materials on one of three different ways: Pulling two flexible materials axially away from each other forming what is called a ‘T’ peel Material or substrate, both held vertically, forming what is called a 180 degree peel Material or substrate, which is held horizontally, forming what, is called a 90 degree peel

Features: Analogue Dial Gauge (50gr / 3kg, other gauges available on demand)
Standard Analogue Gauge.
Single pointer Gauge
IBE instruction Manual included

Digital Handy model and fixed floor model are also available

This Tabletop spectrophotometer  has the advantage of excellent inter-instrument agreement, high accuracy and good replicability.

It could meet your requirement for both color quality control and color matching very easily.

Brief Introduction

1. Transmission D/0 Structure and Reflection D/8 Structure
2. Double Optical Paths Spectral Analysis Technology.

It could get the measurement sample data and internal environment data at the same time to make sure the testing accuracy and

stability for long time running.

3. Compatible with SCI/SCE Measurement.

Adopt D/8 illuminant condition recommended by the CIE to meet the color testing requirement for different industries. It could measure with SCI and SCE to see the color data change more clearly.

4. Four Testing CalibersIt is easy to adjust the testing calibers.The largest caliber diameter reaches 25.4mm. It could test the sample with different sizes.

This is not only suitable for testing the color of opacity sample, but also suitable for transparent or translucent sample’s transmittance and turbidity.

5. Large screen display and Stand-alone operation.It could finish the sample test without connecting with the computer. Large screen display to make sure customer could see the testing result directly and clearly and it will be more convenient to set the instrument status. The color quality management software and color match software are optional according to customer’s need.

6. Unique Calibration Board Design.Fix the calibration board on the testing caliber to make sure the accuracy of the white calibration and guarantee the high accuracy for measurement.
7. Flexible Test Fixture.It could fix the sample with different size and thickness on the testing port tightly in case of stray light entering to affect the testing accuracy.

Technical Data:

This Button Pull Snap Tester is the unique safety test instrument that provides a means to accurately measure how safe accessories are attached in a product. It is also used to compare a variety of accessories from different vendors in the process from product design to production. It is a simple but effective design mainly consisting of a high precision gauge, a sturdy stand and special grips/clamps. It requires very little train. A sample required by standards & regulations is to be fixed horizontally (constant force is applied to secure the sample) so that snap or other accessories attached in fabric can be clamped into.

It can be used in buttons, zippers, toys testing for many brands like NEXT, M&H, GAP, M&S, NIKE, LIVIS, and other famous brands necessary attachments are available.

.

 Standards:16 CFR 1500.51~53、ASTM F963、EN71-Part 1、M&S P115A., H&M, NEXT etc

Standard package 1-16:
1- Imada Force Gauge FB-30K
2- Upper Stud Grip
3- Upper Grasp Button Grip (Upper Tip-Top Grip)
4- Lower Fabric Clamp
5- Low Grasp Button Accessories Kit
6- Three Pronged Clamp
7- Calibration Weight 15LB
8- Mechanical Stand for Imada Force Gauge
9- Upper Long Nose Vise Grip
10- Upper Universal Grip
11- Button snap attachment
12- Extension rod for lower clamp
13- Allen key for handling fitting (2mm)
14- Protective goggles
15- Supper rubber O rings 5 pcs.
16- Operation Manual

Application:

 It is used for color matching of any product under different lights, it is wide ly applied in Textile, toy, printing, plastic, rubber, chemical, ink, ceramic,

 leather, , paints, chemicals, footwear, leather, metal, food, cosmetics multi-industry field.

 Meets to m ajor international standards for visual color evaluation including:

 ASTM D17 29, ISO3664, DIN, ANSI and BSI.

    Tube length: 12 00mm

    Easy to operate by using individual switches for each light source.

    Elapsed time meter for tracking optimal l amp replacement.

    Automatically alternating among light sources.

    No warm-up time or flickering which insures quick and reliable color judgment

    Economic power consumption and low heat generation for high light efficiency

     Lights:

 To alter the specification or modify the appearance without notice right is reserved

The scope of application:

It is used for color matching of any product under different lights, it is wide ly applied in Textile, toy, printing, plastic, rubber, chemical, ink, ceramic,

 leather, , paints, chemicals, footwear, leather, metal, food, cosmetics multi-industry field.

Meets to major international standards for visual color evaluation including:

 ASTM D17 29, ISO3664, DIN, ANSI and BSI.

Features:

1.  Tube length: 600mm
2.  Easy to operate by using individual switches for each light source.
3.  Elapsed time meter for tracking optimal l amp replacement.
4.  Automatically alternating among light sources.
5.  No warm-up time or flickering which insures quick and reliable color judgment
6.  Economic power consumption and low heat generation for high light efficiency

           4 Lights

     5 Lights

     6 Lights

To alter the specification or modify the appearance without notice right is reserved

Application:

Digital Elmendorf Tear Tester, A computer controlled falling-pendulum instrument, to determine the ballistic tearing strength of textiles, plastics, paper or board.

It enables rapid determination of the dynamic resistance of materials designed to be subjected to strong shearing loads (e.g. fabrics) or liable to be damaged by sharp or heavy objects (e.g. paper bags). Subsequently, the test was naturally adopted for all materials in the form of sheet or films, cardboards, cloth, knitted fabrics, plastic films, aluminum foil, non-woven fabrics, complex flexible packaging etc. But does not apply to sparse fabric or stretch materials which tearing direction might be shift in test.

Procedure: The test is carried out on a specimen composed of one or more sheets of standard dimensions 100 x 63 mm, a crack in length of 20 mm of specimen is notched automatically, a usually with a distance of 43mm (1.7 in) remaining to be torn after initiating the tear. The energy of a pendulum of suitable weight is used to completely tear the specimen. The difference in the angle from the vertical of the center of gravity of the pendulum between the downswing and upswing is a measure of the energy absorbed in tearing the sample

This angular movement is measured with a digital encoder and is immediately converted to the mean tearing force for a single sheet by the microprocessor and software incorporated in the apparatus.

Standard: BS 4253, ASTM D1424/5734 , DIN 53862, BS EN ISO 13937, ISO1974/9290.

     Features:

     Works in accordance with all known test standards. RS-232 data output, equipped Tearing Test software Auto specimen notching

    Repeatable, pneumatic specimen gripping system guarantees sufficient clamping pressure to avoid all slipping phenomena,

    thus ensuring perfect reproducibility of the experimental conditions.

    Automatic compensation for friction and leveling errors, no slave pointer, therefore no friction, alignment and maintenance problems.

    Unit: N, gf, cN, Cp can be selected.

Specifications:

1. Testing range: A hammer: 0～16N B hammer: 0～32N C hammer: 0～64N D hammer: 0～128N
2. Testing accuracy:≤±0.2％F·S
3. Tearing length:43mm
4. Length of automatic cut:20±0.1mm
5. Sample size:100×63mm
6. Type of sample clamping: pneumatic clamping
7. Power source:AC220V50Hz
8. External dimension:520×380×700mm
9. Weight: 68kg

Packing list of

Leather softness tester is applied to measure the softness of leather and animal skins.

in order to understand the softness and hardness is uniform or not in the same batch of leather, or the softness and hardness is difference or not in a single piece of soft leather..

Standard: IULTCS.IUP/36, ISO 17235.

Technical Parameters:
a. Test diameter: 25mm/20mm
b. Load: 530±10g driven by miniature pneumatic
c. Dial: 0.1-10mm
d. Dimension: 136×485×168 mm
e.Weight: 5.3 kg
f.Include calibration plates

Fabric Wet ability Tester applies to determine the wet ability of woven, knitted or non-woven fabrics. A funnel is positioned above the penetrating plate and a preset quantity of salt water solution is delivered to the fabric, simultaneously starting the digital timer, which connected to the “North-South” contacts. The timer stops automatically when all solution has been passed through the fabrics, providing data on permeability to evaluate fabrics and finishes.

Standard: ISO 9073-8, FZ/T60017

Technical Parameter:

1. The burette capacity: 50 ml;

2. The funnel flow velocity with electromagnetic valve:

25 ml flow in (3.5 + / – 0.25) s, drip tube 1, outlet is about Φ3 mm 80ml flow in 6s, drip tube 2, outlet is Φ 6 mm
3. The distance between funnel mouth and specimen: adjustable

4. The base material: organic glass;

5. Plate size: 100 mm * 100 mm * 25 mm;

6. Specimen size: 125 mm * 125 mm;

7. The timer accuracy: 0.01 s;

8. Power supply: AC220V+/-10%

9. Size: 530 mm * 250 mm * 250 mm;

10. Weight: 15 kg

The Durawash test machine simulates the conditions necessary to meet leading chain stores standard garment and fabric durability tests. The process control systems provide excellent accuracy and repeatability. The physical performance of the durawash is compatible with that of the “Hoovermatic” Twin Tub and complies with the Marks and Spencer Fabric Durability (C15) and Print Durability (P5) methods of test.

Fifteen minutes of testing in the Durawash is approximately equivalent to five domestic washes, removing the need for repeated wash and dry tests.

This results in reduced cost, labor and required laboratory space and an increased capacity for testing

Multiple tests can be performed in this one instrument, including print durability, pleat retention, cockling,

flock retention, crinkling, differential shrinkage, security of attachments and more.

Standards:  M&S C15 Print Durability, M&S P5 Durability Wash for Garments and Components, M&S P6

Durability Wash for Pleat Retention, M&S P7 Durability of Waddings and Quilted Waddings to Washing,

NEXT TM 8 Appearance for Garments and Products,

BHS TM 12A Durability Wash for Prints and Flock,

BS 7907:2007: Code of Practice for the design and manufacture of children’s clothing to promote mechanical safety

Features:

4. Water bath is made of high quality SUS304 stainless steel.
5. Protection: water-lacking alarm, protection device when opening door.
6. Test-finished alarm.
7. Digital Display

Technical Parameter:

1. a)Fabric/Garment Capacity: Approx 2kg
2. b) Rotation speed: 560 r/min +/-2%
3. c)Specimen size: 500mmx500mm
4. d) Max temperature: 60  +/- 2 ℃, (Could be adjustable)
5. e) Dimension: 700 x 670 x 900mm
6. f) Weight: 75kgs
7. g) Power: 220V, 50Hz

The scope of application:

 Used in a variety of textiles, non‐ woven fabric, leather and other materials, while force (flexible diaphragm law ) in latitude and longitude and in all directions , expansion force and dilation of the performance measurement .

 Related standards: ASTM D3786, ISO 13938.1

Instrument characteristics:

1.  Use 16bit Industry‐grade MCU (ATMEL, US A), more excellent anti ‐jamming, more excellent stability
2.  Print t he test reports by built‐in thermal printer
3.  Dial pressure mete r to show pressure applied to specimen
4.  Proveded with a touch screen readout of pressure, time of burst,
5.  height of burst and the peak hold facility
6.  High quality and renewable rubber diaphragms, manual griping device, and forward reverse and neutralal drive sys tem.

Technical Parameters:

Product description:
Conditioning Chamber to condition samples prior to testing. Completely adheres to the textile conditioning requirements of temperature 22+_ 2 degree Celsius & humidity 65+- 3%.
Laboratory Conditioning Chamber. For the conditioning of samples prior to testing, also applied
for Water Vapour Permeability Testing when equipped with related kits.

Technical Parameter:
Chamber Capacity: 80L
Controller: Programmable Temi 880 touch screen controller. 120 groups 1000 sections, 99H every section, support RS 232 and RS485 communication, support PC monitoring and saving results, USB output, real time display curves.
Test Chamber Dimension: 400 * 500 * 400mm（WidthxHeightxDepth）
Machine Dimension: 970mm * 1360mm * 970mm（WidthxHeightxDepth）

  Performance:
Temperature Range: 0℃ -+150℃
Humidity Range: 20%-98%RH
Temperature maintaining stability: ±0.5℃
Temperature uniformity within the chamber volume: ±2℃
Temperature Resolution: 0.01℃
Humidity maintaining stability: ±2%R.H
Heating and Cooling Speed: 1-3℃/min（No Linear Condition）

  Configuration:
  Main function parts use world brand from USA, Japan, Germany, France, Denmark…etc

  Material of outside Chamber: SUS＃202 stainless steel.
Material of inside chamber: SUS #304 stainless steel with 1.0mm thick.
Insulated layer: Insulated layer fireproof PU + heat insulating glass wool
Observation window: adopt conductive film toughened glass, Philips PL-S 11W light.
Heater: U type Fin type #304 seamless steel high-speed heating electric heater.
Fan: Centrifugal
Compressor: French Tecumseh
Cooling Method: Air cooling
Quantity of shelves: 2
Power: 220V, 50Hz, 4KW

Fabric drying tester, it is compliance with American AATCC201 test standard design to automatic test the fabric drying rate instrument.

Using high-precision temperature sensor, air speed sensor , and automatically drop device test fabric drying time and drying rate

The instrument built-in control panel and display screen, can complete all the test in without connecting to a computer, can also be through the WiFi connect computer for data transmission, data is displayed in the form of curves and graphs , convenient for the user to analyze and print.

Test Principle:

Instrument to simulate human body sweating, sweat in drying process on the fabric, fabric placed above the hotplate , drip 0.2 ml of water in the middle of the heating plate, use 1.5 m/s air to dry the sample, and the infrared temperature sensor test fabric temperature changes ,when fabric dry end,test the drying time get drying speed.

Standard: AATCC 201
Hotplate size：305mmX305mm
Sample Holder：150mm×40mm×2mm
Hotplate temperature：37 ± 0.1 ºC
Temperature display：0.01 ºC
Air Speed :1.5m/s ± 0.1m/s
IR thermocouple：15~50ºC ± 0.1 ºC
Sample thickness：0~10mm
Water Dripping：0.2ml ± 0.001mL
Data Transfer：WiFi
POWER:AC220V±10%,100W or AC110V±10%,100W
Dimension：52(L)×40(W)×26(H)cm
Weight:30kg

The GSM Cutter is for sampling the materials of fabrics and non-fabrics.

The handle is made of aluminum alloy, no broken, Star structure is designed according to the
human touch.

Adopt the high-carbon blade (white); press plate is made of aluminum alloy, not rust, Tight press.
here are 16 stainless steel cross screws on the press plate , make it firm and not slide ,
no rust .

The cutter’s face adopt international advanced T-shaped anti-slip groove structure; minimize the stress in the tangent direction during the cutting and reduce hand fatigue, also ensure that the sample is flat and not slip, a precise cutting .

Adopt the thickness adjustable structure to protect the blade and pad.

It use cork pad, not rubber pad.

Standard: ISO3801, BS2471, ASTM D3776, IWS TM13

Technical Parameter:

Sample area:                         100cm2

Max. Cutting thickness:                5mm

External Dimensions:                 156×112

Accessories: 2 cutting pads included

4 Extra cutting Blades included (Made in UK)

The washing fastness tester Gyrowash, to determine color fastness to washing or dry cleaning to washing fastness methods, it complies with ISO, BSI, AATCC.

Application:

Washing Fastness Tester, to determine color fastness to washing or dry cleaning to ISO, BSI, AATCC and Marks&Spencers standards.

Available in different sizes such as portable washing fastness tester, etc. The washing fastness tester uses stainless steel rotor to holds washpots on each of four sides and rotates at a constant 40 rpm (+/-2 rpm). Washpots are preheated in appropriate test solution, structure wholly made of very strong stainless steel

Colored touch screen display and PLC control, containers are sealed with either a Neoprene rubber gasket or optional Teflon gasket.

To offer a reliable and safe washing fastness test, Washing fastness tester equipped with water-lacking alarm, protection device when opening door, Test-finished alarm, Automatic shutdown with audible warning etc.

Standard: ISO105 C01-C06, M& SC4A. 5.37. P3B, IWSTM 7.115.177.193.240, 241, AATCC 2, 3, 28, 61, 62, 86, 132, 151, 190, FTMS 191-5610/5622, BS 1006, NEXT

Specifications:

Rotation speed: 40+/-2rpm

Quantity of positions: 6 Pcs 550ml+6Pcs 1200ml

Size of ISO washpot: 550ml   75mm dia x 125mm(3.0 in x 5.0in)

Size of AATCC washpot: 1200ml 90mm diax 200mm(3.5 in x 8.0in)

Temperature : Max 95℃   Adjustable

Running time: Adjustable        

Packing list of XHF-13

First spectrophotometer in China

1.  Obtained China Metrology Accreditation Certificate Large data storage space Large TFT display screen
2.  Modern and fashionable design based on human engineering
3.  Easy to use operation modes and compact operation interface
4.  Pre-locating panel design for easy instrument calibration
5.  Uses LED light source; high capacity rechargeable lithium-ion battery
6.  Can measure both SCI (specular included) and SCE (specular excluded) at the same time
7.  Includes PC software to manage data
8. Can connect to mini-printers for printing

High performance-price ratio among international similar products

 As China’s first spectrophotometer, integrates multiple innovative technical characteristic, and extends the boundary of on-site color quality control during production;

It can be applied to laboratories, factories and on-site operations, and can achieve the best color management across all application fields’ quality control

Allows medium and small companies to obtain high performance color management system with relatively low price

The software contains all necessary color equations, standard light sources, and a large number of standards for specific industries and applications

Operation system supports both English and Chinese interfaces, and we offer to design the interface in other languages based on the need of our customers.

Professional design, powerful instrument functions

Professional horizontal design and it does not have any moving parts, which avoids the shaking of the instrument during measurement process.

This makes the measurement more accurate

PC software for easy measurement data management

Can measure both SCI and SCE at the same time

Large data storage space: can store up to 100 sets of standard samples, with up to 200 measurement records for each standard sample

Adding powder test accessories, easily measure the color of the Powder, granules and other samples

We are introducing this electronic system for Button Snap and Pull tests with all standard test grips per standards. Tester can also be used for tension and compression force, insertion and withdraw force and fracture test for Rubber and plastics, in Textile for yarn and fabric, Architecture doors and windows, composite material, Cables and Cords, and auto parts industry, have preset test speed, and step less speed regulation function Manual and Auto cycle test shift.
Tester can connect with computer, you can control the test stand move up or down by computer. The Digital tester can preset the stop force, when the force arrived the preset force, the tester will auto stop. It means our force gauge can control the test stand when to stop test by preset force.
Digital button snap and pull tester can be used for measuring tension force of different test methods. Easy to operate bench top model can be used for pull or push direction of the force. The display has the blue background light lamp. The tester can set the upper and lower limit to judge the measured results.
The gauge has installed the pilot lamp and buzz alarm to show the upper and lower limit. The gauge can memory 10 test value and calculate the average of the memorized test value automatic. Converting three units N, kgf, lbf automatically. The data display can be changed the direction. Having set the normal measuring\peak hold\automatically peak switch can be used for peak hold test and normal measuring. Non- operation automatic power off, the power off time can be set from 1-60 minutes.
Tester is equipped with a 60 watt powerful AC motor for automatic pull of test.
Stops at pre determined upper lower limits and set speed of test or control Manual.
This digital tester can be used for many other tests with the custom made tests methods for yarn, and paper tensile strength.
50 Kg electronic fore gauge insure the précised test results for button snap and pull tests. Other large capacity Load cells are available per requirements.

Test Stand Panel

Power button: control the whole machine’s power on and off.

Up button: the button shines when up (or left move), turn off when stop.

Down button: the button shines when down (or right move), turn off when stop.

Stop button: stop movement.

Speed governing button: govern the moving speed.

Speed display window: display the setting moving speed at the present time.

Mode shift: shift test mode, shift during the test mode A (cycle) and M (manual).

Mode state pilot lamp: light on is test mode A (cycle); light off is test mode M (inching).

Time window preset: display cycle test time setting at the present, the range is 1-9999 times.

key: character position of moving test times window.

Accumulation key: increase the number in the times window preset, increase “1” when press the key one time.

Minus key: minus the number in the times window preset, minus “1” when press the key one time.

Test time window: display the run times before (“1” time when touch PLU validly).

Zero setting key: setting the running times to zero

Key Display Software graph

LCD Display High accuracy, high resolution

Setting upper and lower limit. The gauge will auto compare the sample.

The result is indicated by red ,green lamp and alarm with Buzzer

Indicate the direction of force

The blue background illumination can be chosen.

Memory 10 testing data, and calculate the average automatically

Three units N, kgf, lbf and convert between the three units automatically

Indicate the max value, minimum value, and average value, eligible and unqualified value.

Peak holding function, and the hold time can be set from 1-10 seconds.

Can print 10 unit test data

Power off time (1-60 minutes) can be set by operator.

RS-232 output can be connected to computer to show the force curve, and to connect the printer.

The voltage required for tester is: AC 220V, 50Hz

The motor power/wattage is: 60W.

Dimension of the package is L*W*H(mm): 510*430*1630 by wooden box.

Package weight ~58 Kg

Comparison of attachment / clamps with SafGuard button pull tester Every one has is own code/name but function is same

This machine is used to determine not only the fabric hydrostatic pressure resistance, but also the hydrostatic pressure proof performance of the coating materials.

Standards: ISO-811, AATCC 127, BS EN20811, ISO 1420

Features:

 Microcomputer control, English LCD menu, four built-in test methods .

The built-in tank design, creative balance system of water pressure rate, rising speed stability and accuracy.

Clamp made of stainless steel, equip LED light to view specimen clearly

Testing Methods:

Turbocharged  Constant pressure time

(It means at the constant pressure, how long can appear the first water drop on the specimen)

Constant pressure regularly (It means at the constant pressure and specify time,

if can appear water drop on the specimen).

Leakage water method

Technical Parameter:

Testing range: 0.5kpa-200kpa

Accuracy: 0.2%F.S

Elevation Speed: 1kpa-30kpa

Clamp Area: 100cm²

Testing Units:（pa  mmHg     cmH₂O）

Power: AC 220V 50Hz

Dimension: 550x400x500mm

Weight: 55kg

Use: Suitable for high temperature (or normal temperature) dyeing, washing, dry-cleaning and samples colorfastness test.

Applied Range:

Suitable f or all kinds of yarn and fabric dyeing experiments, especially for N, N/C, T/N and other kinds of knitted and woven cloth, spandex lake, have better levelness and reproducible.

Features:

With internal heating type silicon carbide heat conduction, to avoid the old infrared machine with heat conduction oil as heat carrier inflammable and explosive fatal flaw.

Use stainless steel infrared heater, compared with the external heating infrared glass lamp life long, long time.

Without glycerin, lampblack pollution; Due to the adopted high-power air cooling system, and therefore there is no loss of cooling water;

Heating power is only 1/3 of the traditional oil heat infrared machine, and heat preservation, constant temperature effect is good, save water, electricity, etc Line costs.

Programmable LCD computer installations, a variety of expressions, real time monitor the working state of the curve of the test process and relevant operation.

Adopts frequency conversion control, adjustable rotary speed, better co operate with the scene of the production process works.

To adapt to different kinds of fabric and dyeing processing, the method of general configuration routine for 24 cups of 300ml.

Technical Parameter:

1. Number of steel cup: 24

2. Dyed cup material: stainless steel 316 l a stretch forming.

3. Cup specification: 300 ml.

4. Rotational speed: 0-45 rpm

5. Operating temperature : room temperature to 14 0 ℃.

6. Temperature control precision:±2℃

7. Heating rate: 0.5 – 33 ℃ / min (full cup slightly lower, about 3 ℃ / min)

8. Cooling: forced air cooling.

9. Heat conduction medium: carborundum.

10 . Power specifications: 110V, 60Hz, Single phase

11 . Dimension : 750mm * 7 75mm * 775 mm (long * deep * high).

12 . Machine weight: about 195 kg.

Jigger Dyeing Machine is suitable to test the dyeing of cotton and linen cloth, viscose, man-made fiber, etc., and suitable for dye material, such as direct dyes, acid dyes, basic dyes, insoluble azo dyes, and reactive dyes, etc. This apparatus can achieve bleaching and dyeing with low-liquor ratio, simulates as nearly as possible the mechanism of production jigs.

Jigger Dyeing Machine is specially designed to satisfy the requirements of testing dye formula before quantity production of dyeing and finishing enterprise. This apparatus simulates as nearly as possible the mechanism of production jigs’ requirements of speed, temperature, pre-tension, etc. of real production process. Compared with production machine, this Laboratory Jig Dyeing Machine’s size is smaller, consumes small quantity of dye, and with short testing process, so operator is easier to change dye formula, and finds suitable dye formula in a short time. Therefore this machine is well welcomed by many dyeing and finishing enterprise

Manual Operation Mode Interface

 Technical Parameter:

 Control Mode: Touch Screen+ PLC

 Effective Roller Width: ≤500mm

 Roller Diameter:  F 57mm- F 200mm

 Cloth speed :0.5-8m/min +/- 0.001 m/min

 Temperature Range and accuracy: Room Temperature -98℃+/- 2℃

 Temperature Ratio: 1-3 ℃

 Tension: 0-18kgs

Material tension control mode: the difference speed between A and B roller.

 Cooling: automatic water cold system

 Power: AC 380V, 50Hz

The Launderometer (washing fastness tester, called different names as (Gyrowash, Rotawash, Dynowash), to determine color fastness to washing or dry cleaning to washing fastness methods, it complies with ISO, BSI, AATCC and Marks& Spencer standards.

Feature:

 Available in different sizes such as portable washing fastness tester, etc. The washing fastness tester uses stainless steel rotor to holds washpots on each of four sides and rotates at a constant 40 rpm (+/-2 rpm). Washpots are preheated in appropriate test solution, structure wholly made of very strong stainless steel.

Color touch screen display and PLC control, containers are sealed with either a Neoprene rubber gasket or optional Teflon gasket.

Small and large test vessels are interchangeable so they can be placed in every position.

This allows operators to test to both ISO (European) and AATCC (American) Standards with ease.

To offer a reliable and safe washing fastness test, Washing fastness tester equipped with water-lacking alarm, protection device when opening door, Test-finished alarm, Automatic shutdown with audible warning etc, electric drainage function is optional.

Standard: ISO105 C01-C06, M& SC4A. 5.37. P3B, IWSTM 7.115.177.193.240, 241, AATCC 2, 3, 28, 61, 62, 86, 132, 151, 190, FTMS 191-5610/5622, BS 1006, NEXT

Technical Parameter:

Rotation speed: 40+/-2/rpm

Quantity of positions: 8, 12, 16, 20 depend on customer’s request

Size of ISO washpot: 550ml   75mm dia x 125mm(3.0 in x 5.0in)

Size of AATCC washpot: 1200ml 90mm diax 200mm(3.5 in x 8.0in)

Temperature : Max 95℃   Adjustable

Running time: Adjustable

PACKING LIST:

DESCRIPTION:
Used for Inks Latex Adhesives dyes and chemicals (Solvent base) Polymer Solutions Oils Paints and Coatings Solvents Cosmetics Dairy Products Pharmaceuticals Juices, etc

Digital instrument for the measuring of viscosity with all data reading on display, serial , output RS-232C to connect a PC, DV-Loader software and analogical output 0-1 Vdc. Intermediate model ready to use PC for data process. Full interchangeable to Brookfield accessories range. The LCD display shows simultaneously: viscosity in cP or mPas, torque %, rpm, installed spindle, temperature in °C or °F, shear rate, shear stress.

Display information: Viscosity (mPa.s), Temperature: C , Speed/Spindle, Shear Rate/ Stress,

Built in option: Timed tests, Choice of speed, RTD temp probe
Speed selection: Appropriate rg of speeds with easy selection
Accuracy: ±1.0%of rg
Repeatablity: ± 0.5%
Auto Rg showing: Full scale rg, Max viscosity measured,
Spindle/Speed Combination
Complete set of LV spindle
DV Loader software
DV gather and analysis software
RTD temp probe
Operation manual

Feature:
DV Gather Software is used to get total control of your instrument and test parameters
Shear Rate/Stress With Special Spindles
Bi-directional RS-232 PC interface
Configurate RTD Temperature Probe
Stepping Motor means Accurate, reliable operation
Direct readout of all measurement parameters
Auto Range Showing
Time Function for measurement
Sound alarm at under 20% Torque
Linear calibration
Wide range power supply:100V-240V
Technical Parameter:
Range: 6-6,000,000 (mPa.s)
Speed: 0.1- 200rpm
Spindles: L1, L2, L3, L4
Accuracy: ±1 %（FS）
Repeatability: ±0.5%
Power: 100-240V, 50-60Hz

Multipurpose Flammability Tester automatically determine the flammability resistance to a vertical flame of apparel fabrics, protective fabrics, curtains and children’s sleepwear.

Standard: BS EN ISO 6940, EN ISO 6941, BS 5438, EN ISO 15025

Technical Parameter:

Ignition of the time range:0-99.99S

Precision: 0.01S

Continued burning time:0-999.9S

Ignition fire mouth: According to ISO 6941 Standard

Fire Mouth angle: 0°/30°/90°(Adjustable)

Flame Measurement Height: 20mm/40mm

Dimension inside U clamp: 80mmx600mm

Mark line on U clamp: adjustable

Dimension:800mmX550mmX660mm

Weight: 50kgs

Power: AC 220V/110V

This machine is suitable for dyeing in common temperature (20℃-100℃)

and the operation is simple. Neutral alkali, salt and other additions can be softly added during the process of dyeing.

It also applies to the cotton bath, soap and bleached experiment

Features:

Equip imported motor with large Angular moment from Taiwan.

The shell is made of stainless steel S.S304 material

Programmable Temperature controller and PT-100 probe

  Technical Parameter:
Number of Beaker: (24Cups)
Beaker Specification: 250cc Triangular Glass Beaker
Oscillation Speed: 30-200 reciprocation/min

  (shaking from right to left)
Temperature Range: Room Temperature – 100℃
Heating: Electrical Heating
Power Supply: 4kw, AC220V, 50HZ
Overall Dimension (L*W*H): 106*55*72c m
Included: 250cc Triangular glass Beaker

Introduction:
1. To determine the strength requires to separating fabric with interlining / fusing.
2. It can give repeatable and accurate results.
3. Optional: Long Gripper is provided to hold the test specimen accurately.
4. Can be used vertically and Horizontally
5. CE certified Electronic Gauge
Peel test or adhesion testing is the measurement of the adhesive or bond strength between two materials. It is performed by applying a tension load to the materials on one of three different ways:
• Pulling two flexible materials axially away from each other forming what is called a ‘T’ peel
• Material or substrate, both held vertically, forming what is called a 180 degree peel
• Material or substrate, which is held horizontally, forming what is called a 90 degree peel
Features:
1. Digital Gauge 10 kg -10g (20 & 25 Kg Available)
2. Kg to Lb unit conversion facility
3. Sensitivity 1%
4. Large LCD Display
5. Auto peak hold, Tar button
6. Long Battery Backup-More than 100 hrs
7. Auto Power off for saving batteries after 20 seconds
8. Screen back light On / Off control

The perspiration tester is to determine color fastness to water, perspiration fastness in textiles

Standards:
Perspiration : AATCC 15 , EN ISO 1 05 E04 , DIN 54020 , JIS L0848 , BS 1006 E04 Water : AATC C 107, EN ISO 105 E01 , DIN 54006 , DIN54005 , JIS L 0846 , BS 10 06 E01

Sea water : AATCC 106 , EN ISO 105 E02 , DIN 54007 , JIS L0847 , BS 1006 E02 Application :

It is to deter mine color fastness test t o water, sea water, perspiration fastness in textiles and sublimation during storage. Perspiration tester consists of a stainless steel frame with 21 acrylic separator plates to hold 20 samples. An electric precise oven is required.

Test Procedure:

Treat the composite sample with synthetic perspiration, sea water or water. Place the perspiration tester with 20 samples which held between plates under a given pressure by standard loading weight into an oven for a requested time at a requested temperature.

Compare the degree of fading and pollution of attached white cloth with gray scale, and appraise the perspiration color fastness

Technical Parameter:

AATCC Count Weight: 3.63kg (8LB)

ISO Count Weight: 4.08 kg (9LB)

Laminate w eight: 0.90kg (2LB)

AATCC acrylic separator plates: (22 Pcs)

ISO acrylic separator plates: (21 Pcs)

Weight: 8 K g

Dimensions: 420mm*15 0mm*300 m m(LxWxH)

Random Tumble Pilling Tester. To determine the pilling and fuzzing characteristics of textile, fabrics. Stainless steel impellers rotate within individually lit aluminum chambers constantly tumbling test fabrics against cork liners for a pre-determined time controlled by a timer andaudible alarm. With 2 or 4 test chambers. Laboratory standard compressed air supply required.

XHF-03C-1 Randum Tumble Pilling Tester-2 test chambers

XHF-03C-2 Randum Tumble Pilling Tester-4 test chambers

Standards: ASTM D3512, DIN 53867, JIS L1076

Technical Parameter :

Rotating speed: 1200rpm

Size of Testing Cylinder: Diameter146mm, Depth:152mm

Sample Dimension: 105mmx105mm

Dimensions: 400x390x515mm (LxWxH), 420x55x570mm(LxWxH)

Weight: 31kg, 65kg

Original Accessories: SDL Cork Liners 50Pcs/Pack

Cotton Silver 1 Yarn

Photographic standards card 5Pcs/Set

Rotary Crock Meter to determine the color fastness of textiles to dry and wet rubbing particularly for printer fabrics. Applies 1134g of pressure on a 16mm finger and rotates 1.125 turns clockwise then anti-clockwise. The operating handle is however turn in one direction only.

Standards: AATCC 116;   ISO 105 X16

 Technical Parameter:

Diameter of rubber head: Diameter of rubbing head: 16±0.1mm

Turning of vertical pole: after turning1.125 circles then reverse

Dimensions: 260×150×210mm

Weight: 5kg

Optional:

AATCC crocking clothes 1Box (1000Pcs)

AATCC grey scale

Used in a variety of textiles, non- woven fabric, leather and other materials, while force ( flexible diaphragm law ) in latitude and longitude and in all directions , expansion force and dilation of the performance measurement .

Integrated safety shied
Provided with a touch screen readout of pressure, time of burst, height of burst

Big touch screen operation, also can use PC operation.
High quality and renewable rubber diaphragms, manual griping device, and forward reverse and neutral drive system
High quality AC servo motor driven

Related standards : ASTM D3786, ISO 13938.1, BS 3424 (PT. 6), ISO 3033-B, EN 12332-2

Features:
Hydraulic pressure to 6000Kpa
Quick change bells
Diaphragm correction
Automatic flow rate adjustment
Software analysis for full results
Distension measurement up to 70mm

Technical Parameters :
Capacity 0~6MPa (6000Kpa)
Test Speed Adjustable, 20-800ml/min
Bursting strength accuracy ±0.5%FS
Hydraulic fluid glycerin with concentration 85%

Thermal conductivity tester, to determine the tog, clo, thermal conductivity of various fabrics, quilting products, and other heat insulation materials. Microcomputer controlled, data processors and quality temperature sensors are used, ensures high test speed and precise test result. All performances of the sample (Include thermal conductivity, tog value, clo value) can be directly calculated. Test data and result is displayed on the large LCD display, and can be stored or printed out.

Standards: ASTM D1518, JIS L1018, ISO 11092

  Main technical parameters:

1. Heating Plate Temperature Adjustable Range : 20-50°C

2. Range of Pre-heating Time: 0-99 Minutes

3. Cyclic heating period setting range: 1-9 times

4. Testing times: 1-9 times

5. Resolution of Temperature: 0.1°C

6. Parameters of heating plate: Testing plate 40W, Guard plate 120W, Base plate: 40W

7. Dimension of testing plate: 250×250 mm

8. Dimension of testing platform: 510×51×640 mm

9. Dimension of controller: 300×345×150 mm

10. Power: AC 220V±5%, 50Hz 30W

The Vertical Fabric flammability tester is used for testing trend of after flame, flame retardant and carbonization of camping tentage.. It is automatically determine the flammability resistance to a vertical flame of camping tentage.

Characteristics:

1 . Use PLC touch screen control

2.  Electric automatically burner, light clocking set freely from 0-999.9s.
3.  Burning chamber is stainless steel.
4.  Flame height can be adjusted
5. Automatically burner orientation

Standards: CPAI 84 Flammability Test Method Wall and Top Material

Water Vapor Permeability Tester, To determine the resistance of textiles and textile composites (particularly action wear fabrics) to water vapor penetration. The Water Vapor Permeability Tester consists of 8 containers with water reservoirs, a standard permeable fabric cover, sample holder ring and precision drive system.

Standard: BS 7209 , BS3424

Technical Parameter:

Inner dimension of container: diameter: 83mm, depth: 18.5mm

Weight of container: 120-150g/ group (Contain water)
Dishes: Aluminum, P.C.D 305mm
Rotation speed: about 2r/min
Testing Time: can be set

Counter: LCD display, 0-9999h (Random Setting)

Power: 220V, 50Hz