The Lab Coater is the optimum combination of dryer and laboratory coating table. Various kinds of material samples are coated in the same run by the coating device and heat-treated in the dryer.

The coating is applied either by a floating, roller or rubber blanket knife. Multiple coatings which do not require reloading are also possible.

Technical Parameter:

Max. Coating area : 300x400mm
Coating thickness: 0-5mm,
Resolution ratio: 0.01mm

Electric coating, coating speed: 0-4m/min, double direction adjust speed (Electronic model has this function)

Removable pin frame, the pin frame can be put into the oven with the textile when coated.