50X Desktop Textile Ozone Chamber
Ozone Test Chamber is used to determine the colorfastness of textiles
when it is exposed to ozone in the atmosphere at room temperature..
Features:
The instrument consists of a stainless steel experimental chamber and a fully enclosed gas circuit for the production of ozone by silent discharge. The entire ozone gas generated and captured is enclosed to ensure personal safety. Ozone aeration chamber: composed of ozone generator, fan, baffle, sample compartment.
Standard: AATCC 109, ISO 105 G03
| Temperature control range | 0-80℃, control accuracy: +-0.2℃ |
| Humidity control range | 30-98%，ontrol accuracy: +-2% |
| Ozone concentration | 0-200p.p.h.m,control accuracy:+-1p.p.h.m |
| Ozone chamber size | 500mm (W)x400mm(D)x400mm (H) |
| Sample Hanger | 2 layers |
| Weight | 90Kgs |
| Ozone generation system | |
| The system uses high-precision ceramic high-voltage plate discharge. | |
| Ozone concentration range | random setting 0-500pphm |
| Ozone removal device | Activated carbon |
| Ozone detection system | |
| Detection range | 0-200pphm |
| Measurement accuracy | +-2%,display resolution:0.1pphm |
$18,687.00
Related Products
Multipurpose Flammability Tester automatically determine the flammability resistance to a vertical flame of apparel fabrics, protective fabrics, curtains and children’s sleepwear.
Standard: BS EN ISO 6940, EN ISO 6941, BS 5438, EN ISO 15025
Technical Parameter:
Ignition of the time range:0-99.99S
Precision: 0.01S
Continued burning time:0-999.9S
Ignition fire mouth: According to ISO 6941 Standard
Fire Mouth angle: 0°/30°/90°(Adjustable)
Flame Measurement Height: 20mm/40mm
Dimension inside U clamp: 80mmx600mm
Mark line on U clamp: adjustable
Dimension:800mmX550mmX660mm
Weight: 50kgs
Power: AC 220V/110V
The scope of application:
It is used for color matching of any product under different lights, it is wide ly applied in Textile, toy, printing, plastic, rubber, chemical, ink, ceramic,
leather, , paints, chemicals, footwear, leather, metal, food, cosmetics multi-industry field.
Meets to major international standards for visual color evaluation including:
ASTM D17 29, ISO3664, DIN, ANSI and BSI.
Features:
- Tube length: 600mm
- Easy to operate by using individual switches for each light source.
- Elapsed time meter for tracking optimal l amp replacement.
- Automatically alternating among light sources.
- No warm-up time or flickering which insures quick and reliable color judgment
- Economic power consumption and low heat generation for high light efficiency
4 Lights
| Model | Name | Pcs | Power | Color Temperature |
| Four Lights
220V, 50Hz |
D65 | 2 | 36W/Piece | 6500K |
| TL84 | 2 | 36W/Piece | 4000K | |
| F/A | 4 | 40W/Piece | 2700K | |
| UV | 1 | 40W/Piece | 365nnm |
5 Lights
| Model | Name | Pcs | Power | Color Temperature |
| Five Lights
220V, 50Hz |
D65 | 2 | 36W/Piece | 6500K |
| TL84 | 2 | 36W/Piece | 4000K | |
| F/A | 4 | 40W/Piece | 2700K | |
| UV | 1 | 40W/Piece | 365nnm | |
| CWF | 2 | 36W/Piece | 4200K |
6 Lights
| Model | Name | Pcs | Power | Color Temperature |
| Six Lights
220V, 50Hz |
D65 | 2 | 36W/Piece | 6500K |
| TL84 | 2 | 36W/Piece | 4000K | |
| F/A | 6 | 40W/Piece | 2700K | |
| UV | 1 | 40W/Piece | 365nnm | |
| CWF | 2 | 36W/Piece | 4200K | |
| U30 | 2 | 36W/Piece | 3000K |
To alter the specification or modify the appearance without notice right is reserved
Fabric Thickness tester is applicable of measuring the thickness o f tissue pap er, woven, knitted fabric s, non- woven and o ther uniform materials. It is designed according to
Standards: ISO5084 ,FZ/T6000 4, ISO9073, ISO 98 63….etc.
Technical Para meter :
Thickness measuring range : 0-25mm
Min. graduation value : 0.001 mm
Press foot diameter: 11.28mm , 50.48 mm, 56.42 mm, 112.84 mm
Press er foot area : 100, 2000, 2500, 1000 0(mm2)
Weighing poise : 5cN*1, 10cN*2, 50cN*2, 100cN*1,4 00cN*1,1000 cN*1 (combine)
Press time: 10s,30s
Test speed: when press time is 10s, about 2.1 times/minutes; when press time is
30s, 1.2 times/minutes.
Weight : 30kg
External Dimensions : 210x450x400mm
Power source : A C220V±10% 50Hz
The washing fastness tester Gyrowash, to determine color fastness to washing or dry cleaning to washing fastness methods, it complies with ISO, BSI, AATCC.
Application:
Washing Fastness Tester, to determine color fastness to washing or dry cleaning to ISO, BSI, AATCC and Marks&Spencers standards.
Available in different sizes such as portable washing fastness tester, etc. The washing fastness tester uses stainless steel rotor to holds washpots on each of four sides and rotates at a constant 40 rpm (+/-2 rpm). Washpots are preheated in appropriate test solution, structure wholly made of very strong stainless steel
Colored touch screen display and PLC control, containers are sealed with either a Neoprene rubber gasket or optional Teflon gasket.
To offer a reliable and safe washing fastness test, Washing fastness tester equipped with water-lacking alarm, protection device when opening door, Test-finished alarm, Automatic shutdown with audible warning etc.
Standard: ISO105 C01-C06, M& SC4A. 5.37. P3B, IWSTM 7.115.177.193.240, 241, AATCC 2, 3, 28, 61, 62, 86, 132, 151, 190, FTMS 191-5610/5622, BS 1006, NEXT
Specifications:
Rotation speed: 40+/-2rpm
Quantity of positions: 6 Pcs 550ml+6Pcs 1200ml
Size of ISO washpot: 550ml 75mm dia x 125mm(3.0 in x 5.0in)
Size of AATCC washpot: 1200ml 90mm diax 200mm(3.5 in x 8.0in)
Temperature : Max 95℃ Adjustable
Running time: Adjustable
Packing list of XHF-13
| No. | Name | Qty | Remarks |
| 1 | Washing Fastness Tester | 1 | Main body |
| 2 | 550ml washpot | 6 | Be Installed on the machine |
| 3 | 1200ml washpot | 6 | Be Installed on the machine |
| 4 | Stainless Steel Balls | 150 | |
| 5 | Stainless Disks | 12 | |
It is used for the test for drying process and the drying procedures needed by other textiles ,which are prescribed in the standard textiles.
Standard: BS EN ISO 6330-2012, AATCC 135, NEXT standards
Features:
Quality steel with hot coatings as outer shell, and drum is made of stainless steel.
The new impact design ensures silent running and safe operation.
Micro computer control drying temperature, automatic cooling before drying finished.
Digital electricity, hardware control, strong anti-interference ability.
With door open protection.
Drying time can be random selected.
Max loading capacity can reach 15kgs (rated 10kgs).
Technical Parameter:
Type: front-loading, horizontal drum
Rated specimen drying: 10kg
Drying time: room temperature-80℃
Drum diameter: 695mm
Drum depth: 435mm
Drum volume: 165L
Drum speed: 50 r/min
Lifting vanes number: 3 pcs, 120 ° between each one
Power: 220V, 50Hz, 5.5KW
Dimension: 785×960×1365mm
Weight: 100kgs
The Launderometer (washing fastness tester, called different names as (Gyrowash, Rotawash, Dynowash), to determine color fastness to washing or dry cleaning to washing fastness methods, it complies with ISO, BSI, AATCC and Marks& Spencer standards.
Feature:
Available in different sizes such as portable washing fastness tester, etc. The washing fastness tester uses stainless steel rotor to holds washpots on each of four sides and rotates at a constant 40 rpm (+/-2 rpm). Washpots are preheated in appropriate test solution, structure wholly made of very strong stainless steel.
Color touch screen display and PLC control, containers are sealed with either a Neoprene rubber gasket or optional Teflon gasket.
Small and large test vessels are interchangeable so they can be placed in every position.
This allows operators to test to both ISO (European) and AATCC (American) Standards with ease.
To offer a reliable and safe washing fastness test, Washing fastness tester equipped with water-lacking alarm, protection device when opening door, Test-finished alarm, Automatic shutdown with audible warning etc, electric drainage function is optional.
Standard: ISO105 C01-C06, M& SC4A. 5.37. P3B, IWSTM 7.115.177.193.240, 241, AATCC 2, 3, 28, 61, 62, 86, 132, 151, 190, FTMS 191-5610/5622, BS 1006, NEXT
Technical Parameter:
Rotation speed: 40+/-2/rpm
Quantity of positions: 8, 12, 16, 20 depend on customer’s request
Size of ISO washpot: 550ml 75mm dia x 125mm(3.0 in x 5.0in)
Size of AATCC washpot: 1200ml 90mm diax 200mm(3.5 in x 8.0in)
Temperature : Max 95℃ Adjustable
Running time: Adjustable
PACKING LIST:
| No. | Name | Quantity | Remark | |
| 1 | Washing Fastness Tester | 1 set | Main body | |
| 2 | 550ml Container+Vessles | 1 Set | Optional | |
| 3 | 1200ml Container+ Vessels | Optional | ||
| 4 | Stainless Steel Balls | 50 | Pcs | For each pot |
| 5 | Stainless Steel Discs | 1 | Pc | For each pot |
| 6. | Electric Drainage Function | 1 | Pc | Optional |
The scope of application:
Used in a variety of textiles, non‐ woven fabric, leather and other materials, while force (flexible diaphragm law ) in latitude and longitude and in all directions , expansion force and dilation of the performance measurement .
Related standards: ASTM D3786, ISO 13938.1
Instrument characteristics:
- Use 16bit Industry‐grade MCU (ATMEL, US A), more excellent anti ‐jamming, more excellent stability
- Print t he test reports by built‐in thermal printer
- Dial pressure mete r to show pressure applied to specimen
- Proveded with a touch screen readout of pressure, time of burst,
- height of burst and the peak hold facility
- High quality and renewable rubber diaphragms, manual griping device, and forward reverse and neutralal drive sys tem.
Technical Parameters:
| Test Area | φ30 .5±0.05mm (7.3cm2) | ||
| Test Area | φ79 .8mm±0.05 mm (50cm2 ) | ||
| Capacity | 0~6MPa (6000K pa) | ||
| Fluid rate | Adjustable | ||
| Bursting strength accuracy | ±0. 5%FS | ||
| Hydraulic fluid | glycerin with concentration 85% | ||
| Power supply | Ac220V 50Hz/110V, 60Hz | ||
| Instrument dimension | 560 ×400×680mm(L×W×H) | ||
| weight | 70kg | ||
| Packing list of XHF‐16 | |||
| No. | Name | Quantity | Remark |
| 1 | Bursting Strength Tester | 1 | Main body |
| 2 | Diaphragm | 5 | |
| 3 | Specimen holders | 1 set | φ30.5± 0.05mm |
| 4 | Specimen holders | 1 set | φ79.8mm±0.05mm |
| 4 | Spanner | 1 | Disassemble Holders |
This Tabletop spectrophotometer has the advantage of excellent inter-instrument agreement, high accuracy and good replicability.
It could meet your requirement for both color quality control and color matching very easily.
Brief Introduction
- Transmission D/0 Structure and Reflection D/8 Structure
- Double Optical Paths Spectral Analysis Technology.
It could get the measurement sample data and internal environment data at the same time to make sure the testing accuracy and
stability for long time running.
- Compatible with SCI/SCE Measurement.
Adopt D/8 illuminant condition recommended by the CIE to meet the color testing requirement for different industries. It could measure with SCI and SCE to see the color data change more clearly.
- Four Testing CalibersIt is easy to adjust the testing calibers.The largest caliber diameter reaches 25.4mm. It could test the sample with different sizes.
This is not only suitable for testing the color of opacity sample, but also suitable for transparent or translucent sample’s transmittance and turbidity.
- Large screen display and Stand-alone operation.It could finish the sample test without connecting with the computer. Large screen display to make sure customer could see the testing result directly and clearly and it will be more convenient to set the instrument status. The color quality management software and color match software are optional according to customer’s need.
- Unique Calibration Board Design.Fix the calibration board on the testing caliber to make sure the accuracy of the white calibration and guarantee the high accuracy for measurement.
- Flexible Test Fixture.It could fix the sample with different size and thickness on the testing port tightly in case of stray light entering to affect the testing accuracy.
Technical Data:
| Type | XHF-CS-820 | |
| Measurement Condition | Reflection: d/8(Diffused lighting, 8 degrees receiving) Compatible with SCI/SCE Measurement ISO7724/1、DIN5033 Teil7、JIS Z8722 condition C、CIE No.15、ASTM E1164）Transmission d/0(Diffused lighting, Vertical direction receiving) | |
| Size of integrating sphere | Φ15.2cm, Alvan diffused reflection surface coating | |
| Illumination Light source | CLEDs(entire wavelength balanced LED light source） | |
| Sensor | dual light path sensor array | |
| Wavelength range | 400-700nm | |
| Wavelength interval | 10nm | |
| Half spectral width | 5nm |
| Reflectivity range | 0-200% | |
| Reflectivity resolution | 0.01% | |
| Observation angle | 2°/10° | |
| Measurement light source | A,C,D50,D55,D65,D75,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12
CWF,U30,DLF,NBF,TL83,TL84 |
|
| Data being displayed | SPD distribution/data, sample’s color values, color difference Values / graph, pass/fail results, color error tendency, history data color
simulation, manual input standard sample, generate measurement report |
|
| Measurement time interval | 2 seconds | |
| Large Aperture (LAV):2.54cm (=1inch) | ||
| Reflection Aperture | Medium Aperture (MAV):1.5cm(=0.6inch) | |
| Small Aperture (SAV):0.75cmx1.0cm(0.3inch x 0.4inch) | ||
| Very Small Aperture (VSAV):0.3cmx0.8cm(0.12inch x 0.31inch) | ||
| Color space | CIE-L*a*b,L*C*h,CIE-L*u*v,XYZ,Yxy,Transmittance, Hunterlab, | |
| Munsell MI,CMYK, RGB，HSB | ||
| Color difference formulas | ΔE*ab,ΔE*CH,ΔE*uv,ΔE*cmc(2:1),ΔE*cmc(1:1),ΔE*94,ΔE*00 | |
| ΔEab(Hunter),555color classification | ||
| Other colorimetric indices | WI(ASTM E313-10,ASTM E313-73,CIE/ISO, AATCC, Hunter, Taube
Berger, Ganz, Stensby),YI(ASTM D1925，ASTM E313-00,ASTM E313-73),Tint(ASTM E313-00,CIE,Ganz),Metamerism index Milm, Stick color fastness, Color fastness, APHA, Pt-Co, Gardner |
|
| Repeatability | light splitting reflectivity: standard deviation within 0.08% color values: ΔE*ab<=0.015(After calibration, standard deviation of 30 measurements on test white board, 5 second intervals, Maximum: 0.03 | |
| Interface | USB | |
| Data storage | mass storage | |
| Light source longevity | 5 years, 1.5 million tests | |
| Size | 583*330*304mm(L*W*H) | |
| Work temperature range | 15℃-32℃ (60°F-90°F) | |
| Relative Humidity | 0℃ to 45℃，relative humidity 80% or below at 35°C, no condensation | |
| Standard accessories | AC power line, color management software, drive software, USB
cable, black/white calibration tube, 40*10 cuvette, cuvette support, testing report |
|
| Optional | 40×40 cuvette | |
The perspiration tester is to determine color fastness to water, perspiration fastness in textiles
Standards:
Perspiration : AATCC 15 , EN ISO 1 05 E04 , DIN 54020 , JIS L0848 , BS 1006 E04 Water : AATC C 107, EN ISO 105 E01 , DIN 54006 , DIN54005 , JIS L 0846 , BS 10 06 E01
Sea water : AATCC 106 , EN ISO 105 E02 , DIN 54007 , JIS L0847 , BS 1006 E02 Application :
It is to deter mine color fastness test t o water, sea water, perspiration fastness in textiles and sublimation during storage. Perspiration tester consists of a stainless steel frame with 21 acrylic separator plates to hold 20 samples. An electric precise oven is required.
Test Procedure:
Treat the composite sample with synthetic perspiration, sea water or water. Place the perspiration tester with 20 samples which held between plates under a given pressure by standard loading weight into an oven for a requested time at a requested temperature.
Compare the degree of fading and pollution of attached white cloth with gray scale, and appraise the perspiration color fastness
Technical Parameter:
AATCC Count Weight: 3.63kg (8LB)
ISO Count Weight: 4.08 kg (9LB)
Laminate w eight: 0.90kg (2LB)
AATCC acrylic separator plates: (22 Pcs)
ISO acrylic separator plates: (21 Pcs)
Weight: 8 K g
Dimensions: 420mm*15 0mm*300 m m(LxWxH)
This machine is suitable for dyeing in common temperature (20℃-100℃)
and the operation is simple. Neutral alkali, salt and other additions can be softly added during the process of dyeing.
It also applies to the cotton bath, soap and bleached experiment
Features:
Equip imported motor with large Angular moment from Taiwan.
The shell is made of stainless steel S.S304 material
Programmable Temperature controller and PT-100 probe
Technical Parameter:
Number of Beaker: (24Cups)
Beaker Specification: 250cc Triangular Glass Beaker
Oscillation Speed: 30-200 reciprocation/min
(shaking from right to left)
Temperature Range: Room Temperature – 100℃
Heating: Electrical Heating
Power Supply: 4kw, AC220V, 50HZ
Overall Dimension (L*W*H): 106*55*72c m
Included: 250cc Triangular glass Beaker
This Button Pull Snap Tester is the unique safety test instrument that provides a means to accurately measure how safe accessories are attached in a product. It is also used to compare a variety of accessories from different vendors in the process from product design to production. It is a simple but effective design mainly consisting of a high precision gauge, a sturdy stand and special grips/clamps. It requires very little train. A sample required by standards & regulations is to be fixed horizontally (constant force is applied to secure the sample) so that snap or other accessories attached in fabric can be clamped into.
It can be used in buttons, zippers, toys testing for many brands like NEXT, M&H, GAP, M&S, NIKE, LIVIS, and other famous brands necessary attachments are available.
.
Standards:16 CFR 1500.51~53、ASTM F963、EN71-Part 1、M&S P115A., H&M, NEXT etc
Standard package 1-16:
1- Imada Force Gauge FB-30K
2- Upper Stud Grip
3- Upper Grasp Button Grip (Upper Tip-Top Grip)
4- Lower Fabric Clamp
5- Low Grasp Button Accessories Kit
6- Three Pronged Clamp
7- Calibration Weight 15LB
8- Mechanical Stand for Imada Force Gauge
9- Upper Long Nose Vise Grip
10- Upper Universal Grip
11- Button snap attachment
12- Extension rod for lower clamp
13- Allen key for handling fitting (2mm)
14- Protective goggles
15- Supper rubber O rings 5 pcs.
16- Operation Manual
The Vertical Fabric flammability tester is used for testing trend of after flame, flame retardant and carbonization of camping tentage.. It is automatically determine the flammability resistance to a vertical flame of camping tentage.
Characteristics:
1 . Use PLC touch screen control
- Electric automatically burner, light clocking set freely from 0-999.9s.
- Burning chamber is stainless steel.
- Flame height can be adjusted
- Automatically burner orientation
Standards: CPAI 84 Flammability Test Method Wall and Top Material
| Technical Parameters : | ||
| Vent Holes | Top 16 pcs, Two sides, each 6 pcs, diameter: 13mm | |
| Time range and accuracy | 0.0-999.9S, resolution 0.1S (adjustable) | |
| Burner | Inner diameter: 5mm, barrel: 75mm | |
| Distance between burner and | 20mm | |
| specimen | ||
| Flame Height | 38mm (adjustable) | |
| Ignition time in test | 12S (adjustable) | |
| Specimen Size | 300x70mm | |
| Inner dimension of clamp | 360x50mm | |
| Load weights | 50g, 100g, 200g, 350g | |
| Dimensions | 600 x 400x850mm | |
| Weight | 35kg | |
| Power source | 110V/220V, 50Hz/60Hz | |