AATCC Electronic Crock Meter
To determine the color fastness of textiles to dry or wet rubbing.
A pinned acrylic sample holder ensures rapid sample mounting and repeatability of results. Fitted with a pre‐determined electronic counter for strokes up to 9999,
Standards: ISO105‐X12, D02, Bs1006 D02, DIN54021, IWS Tm165, JIS K6328.
Technical Parameter:
Testing Time: 1‐99999
Rubber Travel: 104/100mm (Can be adjust)+/- 3mm
Rubbing Speed: 60r/min
Rubbing pressure: 9N
Rubbing Head: Roundness:φ16mm
Dimension: 600mm x 225mm x 270mm
Weight: 11kgs
Power Source: AC 220V, 50Hz
Accessories:
Rubbing clothing 1 (box)
Sand paper 2 (pcs)
Rings 2 (pcs)
$650.00
Related Products
Used in a variety of textiles, non- woven fabric, leather and other materials, while force ( flexible diaphragm law ) in latitude and longitude and in all directions , expansion force and dilation of the performance measurement .
Integrated safety shied
Provided with a touch screen readout of pressure, time of burst, height of burst
Big touch screen operation, also can use PC operation.
High quality and renewable rubber diaphragms, manual griping device, and forward reverse and neutral drive system
High quality AC servo motor driven
Related standards : ASTM D3786, ISO 13938.1, BS 3424 (PT. 6), ISO 3033-B, EN 12332-2
Features:
Hydraulic pressure to 6000Kpa
Quick change bells
Diaphragm correction
Automatic flow rate adjustment
Software analysis for full results
Distension measurement up to 70mm
Technical Parameters :
Capacity 0~6MPa (6000Kpa)
Test Speed Adjustable, 20-800ml/min
Bursting strength accuracy ±0.5%FS
Hydraulic fluid glycerin with concentration 85%
It is used for the test for drying process and the drying procedures needed by other textiles ,which are prescribed in the standard textiles.
Standard: BS EN ISO 6330-2012, AATCC 135, NEXT standards
Features:
Quality steel with hot coatings as outer shell, and drum is made of stainless steel.
The new impact design ensures silent running and safe operation.
Micro computer control drying temperature, automatic cooling before drying finished.
Digital electricity, hardware control, strong anti-interference ability.
With door open protection.
Drying time can be random selected.
Max loading capacity can reach 15kgs (rated 10kgs).
Technical Parameter:
Type: front-loading, horizontal drum
Rated specimen drying: 10kg
Drying time: room temperature-80℃
Drum diameter: 695mm
Drum depth: 435mm
Drum volume: 165L
Drum speed: 50 r/min
Lifting vanes number: 3 pcs, 120 ° between each one
Power: 220V, 50Hz, 5.5KW
Dimension: 785×960×1365mm
Weight: 100kgs
This Button Pull Snap Tester is the unique safety test instrument that provides a means to accurately measure how safe accessories are attached in a product. It is also used to compare a variety of accessories from different vendors in the process from product design to production. It is a simple but effective design mainly consisting of a high precision gauge, a sturdy stand and special grips/clamps. It requires very little train. A sample required by standards & regulations is to be fixed horizontally (constant force is applied to secure the sample) so that snap or other accessories attached in fabric can be clamped into.
It can be used in buttons, zippers, toys testing for many brands like NEXT, M&H, GAP, M&S, NIKE, LIVIS, and other famous brands necessary attachments are available.
.
Standards:16 CFR 1500.51~53、ASTM F963、EN71-Part 1、M&S P115A., H&M, NEXT etc
Standard package 1-16:
1- Imada Force Gauge FB-30K
2- Upper Stud Grip
3- Upper Grasp Button Grip (Upper Tip-Top Grip)
4- Lower Fabric Clamp
5- Low Grasp Button Accessories Kit
6- Three Pronged Clamp
7- Calibration Weight 15LB
8- Mechanical Stand for Imada Force Gauge
9- Upper Long Nose Vise Grip
10- Upper Universal Grip
11- Button snap attachment
12- Extension rod for lower clamp
13- Allen key for handling fitting (2mm)
14- Protective goggles
15- Supper rubber O rings 5 pcs.
16- Operation Manual
This Fabric shrinkage tester is used for testing the shrinkage and relaxation after washing of various textiles such as cotton, wool, silk, linen, chemical fiber, knitwear, costume etc. It is fit for the factory and testing center with the long-term test.
Standards:ISO-6330-2012, ISO 5077, IWSTM31, BS4923, EN25077/26330, JISL1909, FZ/T70009.
Features :
The apparatus used are for industrial design, suit to the harsh long continuous testing requirements
Suspended inner canister exclusive used, smoothly operation without vibration
Include 12 groups washing programes, users can prepare 6 groups their own shrinkage procedures, and provide programs storage
Variable frequency control technology used, to protect the electrical safety and the smooth operation.
Large touch screen display, figures show clearly
Using high-precision pressure sensors, to ensure that accurate and reliable water level.
Outside and inside fully use stainless steel.
Technical parameters:
| Category | Horizontal roller type, front door feeding mode |
| Inner layer roller | Diameter : 520±1mm |
| Depth: 315±1mm | |
| Inner & outer roller
gap |
2.8cm±0.1cm |
| Lift vane quantity | 3 PCS 120° even distribution |
| Lift vane height | 53mm±1mm |
| Rotation action | Normal: clockwise rotation (12±0.1)S, stop (3±0.1)S |
| anticlockwise rotation (3±0.1)S, stop (12±0.1)S | |
| Soft: clockwise rotation (3±0.1)S, stop (12±0.1)S | |
| anticlockwise rotation (3±0.1)S, stop (12±0.1)S | |
| Rotating speed | Washing time: 52r.p.m |
| Spin : (500±20)r.p.m | |
| Water level control | Low level:10cm , High level:13cm |
| Fill water time | < 2min (water in high level 13cm |
| Drainage duration | < 1min (water in high level 13cm) |
| Setting range to
water temperature |
Room temperature to 99℃ (accuracy: ±1℃) |
| Heating power | 5.4kw |
| Washing capacity | 5kg |
| External Dimensions | 850mm×750mm×1200mm |
| Weight | 140Kg |
| Power source | Three-wire four-phase 380V±10% 50Hz |
Rotary Crock Meter to determine the color fastness of textiles to dry and wet rubbing particularly for printer fabrics. Applies 1134g of pressure on a 16mm finger and rotates 1.125 turns clockwise then anti-clockwise. The operating handle is however turn in one direction only.
Standards: AATCC 116; ISO 105 X16
Technical Parameter:
Diameter of rubber head: Diameter of rubbing head: 16±0.1mm
Turning of vertical pole: after turning1.125 circles then reverse
Dimensions: 260×150×210mm
Weight: 5kg
Optional:
AATCC crocking clothes 1Box (1000Pcs)
AATCC grey scale
The perspiration tester is to determine color fastness to water, perspiration fastness in textiles
Standards:
Perspiration : AATCC 15 , EN ISO 1 05 E04 , DIN 54020 , JIS L0848 , BS 1006 E04 Water : AATC C 107, EN ISO 105 E01 , DIN 54006 , DIN54005 , JIS L 0846 , BS 10 06 E01
Sea water : AATCC 106 , EN ISO 105 E02 , DIN 54007 , JIS L0847 , BS 1006 E02 Application :
It is to deter mine color fastness test t o water, sea water, perspiration fastness in textiles and sublimation during storage. Perspiration tester consists of a stainless steel frame with 21 acrylic separator plates to hold 20 samples. An electric precise oven is required.
Test Procedure:
Treat the composite sample with synthetic perspiration, sea water or water. Place the perspiration tester with 20 samples which held between plates under a given pressure by standard loading weight into an oven for a requested time at a requested temperature.
Compare the degree of fading and pollution of attached white cloth with gray scale, and appraise the perspiration color fastness
Technical Parameter:
AATCC Count Weight: 3.63kg (8LB)
ISO Count Weight: 4.08 kg (9LB)
Laminate w eight: 0.90kg (2LB)
AATCC acrylic separator plates: (22 Pcs)
ISO acrylic separator plates: (21 Pcs)
Weight: 8 K g
Dimensions: 420mm*15 0mm*300 m m(LxWxH)
The Launderometer (washing fastness tester, called different names as (Gyrowash, Rotawash, Dynowash), to determine color fastness to washing or dry cleaning to washing fastness methods, it complies with ISO, BSI, AATCC and Marks& Spencer standards.
Feature:
Available in different sizes such as portable washing fastness tester, etc. The washing fastness tester uses stainless steel rotor to holds washpots on each of four sides and rotates at a constant 40 rpm (+/-2 rpm). Washpots are preheated in appropriate test solution, structure wholly made of very strong stainless steel.
Color touch screen display and PLC control, containers are sealed with either a Neoprene rubber gasket or optional Teflon gasket.
Small and large test vessels are interchangeable so they can be placed in every position.
This allows operators to test to both ISO (European) and AATCC (American) Standards with ease.
To offer a reliable and safe washing fastness test, Washing fastness tester equipped with water-lacking alarm, protection device when opening door, Test-finished alarm, Automatic shutdown with audible warning etc, electric drainage function is optional.
Standard: ISO105 C01-C06, M& SC4A. 5.37. P3B, IWSTM 7.115.177.193.240, 241, AATCC 2, 3, 28, 61, 62, 86, 132, 151, 190, FTMS 191-5610/5622, BS 1006, NEXT
Technical Parameter:
Rotation speed: 40+/-2/rpm
Quantity of positions: 8, 12, 16, 20 depend on customer’s request
Size of ISO washpot: 550ml 75mm dia x 125mm(3.0 in x 5.0in)
Size of AATCC washpot: 1200ml 90mm diax 200mm(3.5 in x 8.0in)
Temperature : Max 95℃ Adjustable
Running time: Adjustable
PACKING LIST:
| No. | Name | Quantity | Remark | |
| 1 | Washing Fastness Tester | 1 set | Main body | |
| 2 | 550ml Container+Vessles | 1 Set | Optional | |
| 3 | 1200ml Container+ Vessels | Optional | ||
| 4 | Stainless Steel Balls | 50 | Pcs | For each pot |
| 5 | Stainless Steel Discs | 1 | Pc | For each pot |
| 6. | Electric Drainage Function | 1 | Pc | Optional |
This machine is suitable for dyeing in common temperature (20℃-100℃)
and the operation is simple. Neutral alkali, salt and other additions can be softly added during the process of dyeing.
It also applies to the cotton bath, soap and bleached experiment
Features:
Equip imported motor with large Angular moment from Taiwan.
The shell is made of stainless steel S.S304 material
Programmable Temperature controller and PT-100 probe
Technical Parameter:
Number of Beaker: (24Cups)
Beaker Specification: 250cc Triangular Glass Beaker
Oscillation Speed: 30-200 reciprocation/min
(shaking from right to left)
Temperature Range: Room Temperature – 100℃
Heating: Electrical Heating
Power Supply: 4kw, AC220V, 50HZ
Overall Dimension (L*W*H): 106*55*72c m
Included: 250cc Triangular glass Beaker
The GSM Cutter is for sampling the materials of fabrics and non-fabrics.
The handle is made of aluminum alloy, no broken, Star structure is designed according to the
human touch.
Adopt the high-carbon blade (white); press plate is made of aluminum alloy, not rust, Tight press.
here are 16 stainless steel cross screws on the press plate , make it firm and not slide ,
no rust .
The cutter’s face adopt international advanced T-shaped anti-slip groove structure; minimize the stress in the tangent direction during the cutting and reduce hand fatigue, also ensure that the sample is flat and not slip, a precise cutting .
Adopt the thickness adjustable structure to protect the blade and pad.
It use cork pad, not rubber pad.
Standard: ISO3801, BS2471, ASTM D3776, IWS TM13
Technical Parameter:
Sample area: 100cm2
Max. Cutting thickness: 5mm
External Dimensions: 156×112
Accessories: 2 cutting pads included
4 Extra cutting Blades included (Made in UK)
Introduction :
Application scope of XHF-05 Martindale Abrasion & Pilling Tester : suitable for the wear-resistance and grinding test under certain pressure of woven and wool-blend fabrics, Leather, knitted goods and non-woven fabric
Standards: ISO5470, IWS TM112/196, DIN53863/53865, BS3424/5690, BS EN 388/530, JIS L1096, ASTM D4966/4970 , ISO17079-2, ISO 12947, ISO17704, ISO 20344, ISO 17076-2, SATRA TM31 and so on.
Features of touch screen Martindale:
1.Machines with two Lissa-jous trajectory.
2.Using color touch-screen operation, PLC control, each working position can be controlled separately.
- Motor overheat protection, convenient operation.
- There is a alarm when the test is finished.
- Data can be restored after the power failure.
Technical Parameters:
Work-station number : 6 or 9 pcs
Counter display : Pre-set counter display: 0-999999
Cumulative counter display: 0-999999
Abrading table diameter : 120mm
Test pressure (abrasion test)
A: cloth specimen clamp:198g +/- 2g
B: textile specimen hammer:395g +/-2g (Equal to 9Kpa)
C: furniture deck specimen hammer:594g +/-2g (Equal to 12Kpa)
Pressure test (pilling test)
A: cloth specimen clamp:155g +/-1g
B: textile specimen hammer:260g +/-1g
Weight of Load hammer: 2385g +/-10g
Dimension: 850mm\ x 600mm x 400mm
Weight: Machine 120kgs Accessories box: 22kgs Voltage supply:220V/110V, 50HZ/60Hz
Packing list
| No. | Name | Quantity | Remark |
| 1 | Abrasion tester | 1 | Main body |
| 2 | Pin Shaft | 6 or 9 | |
| 3 | Hammer | 1 | |
| 4 | Lissa-jous trace pen | 1 | |
| 5 | Dia 140 sample cutter | 1 | |
| 6 | Dia 38 sample cutter | 1 | |
| 7 | Dia 90 sample cutter | 1 | |
| 8 | Weights | 12 or 18 | 395g, 594g each 6 pcs |
| 9 | Specimen clamps | 12 or 18 | dia38mm, dia90mm each 6 pcs |
| 10 | Abrasion table | 6 or 9 | |
| 11 | Specimen fix ring | 6 or 9 | |
| 12 | Rubber rings | 12 or 18 | For installing dia90mm specimen |
| 14 | Load disc | 6 or 9 | |
| 15 | Accessories Case | 2 | Aluminum-Alloy Case |
This machine is used to determine not only the fabric hydrostatic pressure resistance, but also the hydrostatic pressure proof performance of the coating materials.
Standards: ISO-811, AATCC 127, BS EN20811, ISO 1420
Features:
Microcomputer control, English LCD menu, four built-in test methods .
The built-in tank design, creative balance system of water pressure rate, rising speed stability and accuracy.
Clamp made of stainless steel, equip LED light to view specimen clearly
Testing Methods:
Turbocharged Constant pressure time
(It means at the constant pressure, how long can appear the first water drop on the specimen)
Constant pressure regularly (It means at the constant pressure and specify time,
if can appear water drop on the specimen).
Leakage water method
Technical Parameter:
Testing range: 0.5kpa-200kpa
Accuracy: 0.2%F.S
Elevation Speed: 1kpa-30kpa
Clamp Area: 100cm2
Testing Units:（pa mmHg cmH2O）
Power: AC 220V 50Hz
Dimension: 550x400x500mm
Weight: 55kg
Jigger Dyeing Machine is suitable to test the dyeing of cotton and linen cloth, viscose, man-made fiber, etc., and suitable for dye material, such as direct dyes, acid dyes, basic dyes, insoluble azo dyes, and reactive dyes, etc. This apparatus can achieve bleaching and dyeing with low-liquor ratio, simulates as nearly as possible the mechanism of production jigs.
Jigger Dyeing Machine is specially designed to satisfy the requirements of testing dye formula before quantity production of dyeing and finishing enterprise. This apparatus simulates as nearly as possible the mechanism of production jigs’ requirements of speed, temperature, pre-tension, etc. of real production process. Compared with production machine, this Laboratory Jig Dyeing Machine’s size is smaller, consumes small quantity of dye, and with short testing process, so operator is easier to change dye formula, and finds suitable dye formula in a short time. Therefore this machine is well welcomed by many dyeing and finishing enterprise
Manual Operation Mode Interface
Technical Parameter:
Control Mode: Touch Screen+ PLC
Effective Roller Width: ≤500mm
Roller Diameter: F 57mm- F 200mm
Cloth speed :0.5-8m/min +/- 0.001 m/min
Temperature Range and accuracy: Room Temperature -98℃+/- 2℃
Temperature Ratio: 1-3 ℃
Tension: 0-18kgs
Material tension control mode: the difference speed between A and B roller.
Cooling: automatic water cold system
Power: AC 380V, 50Hz