AIR PERMEABILITY TESTER

Introduction :

 Application scope of XHF-05 Martindale Abrasion & Pilling Tester : suitable for the wear-resistance and grinding test under certain pressure of woven and wool-blend fabrics, Leather, knitted goods and non-woven fabric

 Standards:  ISO5470, IWS TM112/196, DIN53863/53865, BS3424/5690, BS EN 388/530, JIS L1096, ASTM D4966/4970 , ISO17079-2, ISO 12947, ISO17704, ISO 20344, ISO 17076-2, SATRA TM31 and so on.

Features of touch screen Martindale:

 1.Machines with two Lissa-jous trajectory.

 2.Using color touch-screen operation, PLC control, each working position can be controlled separately.

3.  Motor overheat protection, convenient operation.
4.  There is a alarm when the test is finished.
5.  Data can be restored after the power failure.

Technical Parameters:

 Work-station number : 6 or 9 pcs

Counter display : Pre-set counter display: 0-999999

Cumulative counter display: 0-999999

         Abrading table diameter : 120mm

Test pressure (abrasion test)

A:  cloth specimen clamp:198g +/- 2g

B:  textile specimen hammer:395g +/-2g (Equal to 9Kpa)

C: furniture deck specimen hammer:594g +/-2g (Equal to 12Kpa)

Pressure test (pilling test)

A:  cloth specimen clamp:155g +/-1g

B:  textile specimen hammer:260g +/-1g

Weight of Load hammer: 2385g +/-10g

Dimension: 850mm\ x 600mm x 400mm

Weight: Machine 120kgs Accessories box: 22kgs Voltage supply:220V/110V, 50HZ/60Hz

Packing list

Used for testing the fastness to dry or wet rubbing and the fastness to brushing of all kinds of colored textiles, motorized operation, auto stop when counts reach pre-set counts..

Features:

1. Adopt linear slide, running more smooth
2. Rubbing head always keep horizontal, no matter thickness of specimen,

no adjust position of rubbing head, easier operation.

3. Adopt block pressing method, better clamping specimen.

 Standards: ISO105-X12, D02, Bs1006 D02, DIN54021, IWS Tm165, JIS K6328. AATCC8/165

Technical Parameter :

Fabric Thickness tester is applicable of measuring the thickness o f tissue pap er, woven, knitted fabric s, non- woven and o ther uniform materials. It is designed according to

Standards: ISO5084 ,FZ/T6000 4, ISO9073, ISO 98 63….etc.

Technical Para meter :

 Thickness measuring range : 0-25mm

Min. graduation value : 0.001 mm

Press foot diameter: 11.28mm , 50.48 mm, 56.42 mm, 112.84 mm

Press er foot area : 100, 2000, 2500, 1000 0(mm2)

Weighing poise :   5cN*1, 10cN*2, 50cN*2, 100cN*1,4 00cN*1,1000 cN*1 (combine)

Press time: 10s,30s

Test speed: when press time is 10s, about 2.1 times/minutes; when press time is

30s, 1.2 times/minutes.

Weight : 30kg

External Dimensions : 210x450x400mm

Power source : A C220V±10% 50Hz

Application:

Digital Elmendorf Tear Tester, A computer controlled falling-pendulum instrument, to determine the ballistic tearing strength of textiles, plastics, paper or board.

It enables rapid determination of the dynamic resistance of materials designed to be subjected to strong shearing loads (e.g. fabrics) or liable to be damaged by sharp or heavy objects (e.g. paper bags). Subsequently, the test was naturally adopted for all materials in the form of sheet or films, cardboards, cloth, knitted fabrics, plastic films, aluminum foil, non-woven fabrics, complex flexible packaging etc. But does not apply to sparse fabric or stretch materials which tearing direction might be shift in test.

Procedure: The test is carried out on a specimen composed of one or more sheets of standard dimensions 100 x 63 mm, a crack in length of 20 mm of specimen is notched automatically, a usually with a distance of 43mm (1.7 in) remaining to be torn after initiating the tear. The energy of a pendulum of suitable weight is used to completely tear the specimen. The difference in the angle from the vertical of the center of gravity of the pendulum between the downswing and upswing is a measure of the energy absorbed in tearing the sample

This angular movement is measured with a digital encoder and is immediately converted to the mean tearing force for a single sheet by the microprocessor and software incorporated in the apparatus.

Standard: BS 4253, ASTM D1424/5734 , DIN 53862, BS EN ISO 13937, ISO1974/9290.

     Features:

     Works in accordance with all known test standards. RS-232 data output, equipped Tearing Test software Auto specimen notching

    Repeatable, pneumatic specimen gripping system guarantees sufficient clamping pressure to avoid all slipping phenomena,

    thus ensuring perfect reproducibility of the experimental conditions.

    Automatic compensation for friction and leveling errors, no slave pointer, therefore no friction, alignment and maintenance problems.

    Unit: N, gf, cN, Cp can be selected.

Specifications:

1. Testing range: A hammer: 0～16N B hammer: 0～32N C hammer: 0～64N D hammer: 0～128N
2. Testing accuracy:≤±0.2％F·S
3. Tearing length:43mm
4. Length of automatic cut:20±0.1mm
5. Sample size:100×63mm
6. Type of sample clamping: pneumatic clamping
7. Power source:AC220V50Hz
8. External dimension:520×380×700mm
9. Weight: 68kg

Packing list of

Use: Suitable for high temperature (or normal temperature) dyeing, washing, dry-cleaning and samples colorfastness test.

Applied Range:

Suitable f or all kinds of yarn and fabric dyeing experiments, especially for N, N/C, T/N and other kinds of knitted and woven cloth, spandex lake, have better levelness and reproducible.

Features:

With internal heating type silicon carbide heat conduction, to avoid the old infrared machine with heat conduction oil as heat carrier inflammable and explosive fatal flaw.

Use stainless steel infrared heater, compared with the external heating infrared glass lamp life long, long time.

Without glycerin, lampblack pollution; Due to the adopted high-power air cooling system, and therefore there is no loss of cooling water;

Heating power is only 1/3 of the traditional oil heat infrared machine, and heat preservation, constant temperature effect is good, save water, electricity, etc Line costs.

Programmable LCD computer installations, a variety of expressions, real time monitor the working state of the curve of the test process and relevant operation.

Adopts frequency conversion control, adjustable rotary speed, better co operate with the scene of the production process works.

To adapt to different kinds of fabric and dyeing processing, the method of general configuration routine for 24 cups of 300ml.

Technical Parameter:

1. Number of steel cup: 24

2. Dyed cup material: stainless steel 316 l a stretch forming.

3. Cup specification: 300 ml.

4. Rotational speed: 0-45 rpm

5. Operating temperature : room temperature to 14 0 ℃.

6. Temperature control precision:±2℃

7. Heating rate: 0.5 – 33 ℃ / min (full cup slightly lower, about 3 ℃ / min)

8. Cooling: forced air cooling.

9. Heat conduction medium: carborundum.

10 . Power specifications: 110V, 60Hz, Single phase

11 . Dimension : 750mm * 7 75mm * 775 mm (long * deep * high).

12 . Machine weight: about 195 kg.

The Durawash test machine simulates the conditions necessary to meet leading chain stores standard garment and fabric durability tests. The process control systems provide excellent accuracy and repeatability. The physical performance of the durawash is compatible with that of the “Hoovermatic” Twin Tub and complies with the Marks and Spencer Fabric Durability (C15) and Print Durability (P5) methods of test.

Fifteen minutes of testing in the Durawash is approximately equivalent to five domestic washes, removing the need for repeated wash and dry tests.

This results in reduced cost, labor and required laboratory space and an increased capacity for testing

Multiple tests can be performed in this one instrument, including print durability, pleat retention, cockling,

flock retention, crinkling, differential shrinkage, security of attachments and more.

Standards:  M&S C15 Print Durability, M&S P5 Durability Wash for Garments and Components, M&S P6

Durability Wash for Pleat Retention, M&S P7 Durability of Waddings and Quilted Waddings to Washing,

NEXT TM 8 Appearance for Garments and Products,

BHS TM 12A Durability Wash for Prints and Flock,

BS 7907:2007: Code of Practice for the design and manufacture of children’s clothing to promote mechanical safety

Features:

4. Water bath is made of high quality SUS304 stainless steel.
5. Protection: water-lacking alarm, protection device when opening door.
6. Test-finished alarm.
7. Digital Display

Technical Parameter:

1. a)Fabric/Garment Capacity: Approx 2kg
2. b) Rotation speed: 560 r/min +/-2%
3. c)Specimen size: 500mmx500mm
4. d) Max temperature: 60  +/- 2 ℃, (Could be adjustable)
5. e) Dimension: 700 x 670 x 900mm
6. f) Weight: 75kgs
7. g) Power: 220V, 50Hz