COLOR MATCHING CABINET 600MM
The scope of application:
It is used for color matching of any product under different lights, it is wide ly applied in Textile, toy, printing, plastic, rubber, chemical, ink, ceramic,
leather, , paints, chemicals, footwear, leather, metal, food, cosmetics multi-industry field.
Meets to major international standards for visual color evaluation including:
ASTM D17 29, ISO3664, DIN, ANSI and BSI.
Features:
- Tube length: 600mm
- Easy to operate by using individual switches for each light source.
- Elapsed time meter for tracking optimal l amp replacement.
- Automatically alternating among light sources.
- No warm-up time or flickering which insures quick and reliable color judgment
- Economic power consumption and low heat generation for high light efficiency
4 Lights
| Model | Name | Pcs | Power | Color Temperature |
| Four Lights
220V, 50Hz |
D65 | 2 | 36W/Piece | 6500K |
| TL84 | 2 | 36W/Piece | 4000K | |
| F/A | 4 | 40W/Piece | 2700K | |
| UV | 1 | 40W/Piece | 365nnm |
5 Lights
| Model | Name | Pcs | Power | Color Temperature |
| Five Lights
220V, 50Hz |
D65 | 2 | 36W/Piece | 6500K |
| TL84 | 2 | 36W/Piece | 4000K | |
| F/A | 4 | 40W/Piece | 2700K | |
| UV | 1 | 40W/Piece | 365nnm | |
| CWF | 2 | 36W/Piece | 4200K |
6 Lights
| Model | Name | Pcs | Power | Color Temperature |
| Six Lights
220V, 50Hz |
D65 | 2 | 36W/Piece | 6500K |
| TL84 | 2 | 36W/Piece | 4000K | |
| F/A | 6 | 40W/Piece | 2700K | |
| UV | 1 | 40W/Piece | 365nnm | |
| CWF | 2 | 36W/Piece | 4200K | |
| U30 | 2 | 36W/Piece | 3000K |
To alter the specification or modify the appearance without notice right is reserved
$400.00
Related Products
Application:
It is used for color matching of any product under different lights, it is wide ly applied in Textile, toy, printing, plastic, rubber, chemical, ink, ceramic,
leather, , paints, chemicals, footwear, leather, metal, food, cosmetics multi-industry field.
Meets to m ajor international standards for visual color evaluation including:
ASTM D17 29, ISO3664, DIN, ANSI and BSI.
Tube length: 12 00mm
Easy to operate by using individual switches for each light source.
Elapsed time meter for tracking optimal l amp replacement.
Automatically alternating among light sources.
No warm-up time or flickering which insures quick and reliable color judgment
Economic power consumption and low heat generation for high light efficiency
Lights:
| Model | Name | Pcs | Power | Color Temperature |
| Six Lights
220V, 50Hz |
D65 | 2 | 36W/Piece | 6500K |
| TL84 | 2 | 36W/Piece | 4000K | |
| F/A | 6 | 40W/Piece | 2700K | |
| UV | 1 | 40W/Piece | 365nnm | |
| CWF | 2 | 36W/Piece | 4200K | |
| U30 | 2 | 36W/Piece | 3000K |
To alter the specification or modify the appearance without notice right is reserved
APPLICATIONS:
Adjust to the same pick up with bulk production and provide precise pressed dyeing or resin prescription To check the color shade change and to further avoid it happening during resin finishing or heat setting processes after dyeing. Application tests of water repellent, flame retarding and other coating tests special features.
SPECIAL FEATURES:
- Constant nip pressure can be kept due to pneumatic design
- The left or right side pressure of padding roller can be independently adjustable to the required one.
- Easy to operate once you set the required padding nip pressure no other re‐adjustment will be needed.
- Safety devices include a fabric feeder, safety rod, emergency button and a knee pedal to make sure the safe operations at every test.
SPECIFICATION:
- One pair of padding rollers made of N, B, R, rubber material of 70°shore hardness
- Rubber roller diameter 125mmφlength 450 mm
- Driven by 1/4 hp motor with speed reducer (voltage & hertz to be specified)
- Revolving speed is 0‐10m/min (variable frequency speed control)
- Two pressure gauges 0~5kg /cm2
- Two pressure regulating valves (precision 0.1 kg /cm2)
- Air compressor is excluded.
Technical Parameter:
| Model | P‐A Vertical type | P‐B Horizontal Type |
| Dimensions | 85×56×140CM | 85×56×140CM |
| Power | 380‐400 VAC, 50Hz | 380‐400 VAC, 50Hz |
| Net Weight: | ~120 KGS | ~120 KGS |
| Shipment weight: | ~210 KGS | ~190 KGS |
| Shipmen Dimension: | ~100*75*145CM | ~95*75*120CM |
Use: Suitable for high temperature (or normal temperature) dyeing, washing, dry-cleaning and samples colorfastness test.
Applied Range:
Suitable f or all kinds of yarn and fabric dyeing experiments, especially for N, N/C, T/N and other kinds of knitted and woven cloth, spandex lake, have better levelness and reproducible.
Features:
With internal heating type silicon carbide heat conduction, to avoid the old infrared machine with heat conduction oil as heat carrier inflammable and explosive fatal flaw.
Use stainless steel infrared heater, compared with the external heating infrared glass lamp life long, long time.
Without glycerin, lampblack pollution; Due to the adopted high-power air cooling system, and therefore there is no loss of cooling water;
Heating power is only 1/3 of the traditional oil heat infrared machine, and heat preservation, constant temperature effect is good, save water, electricity, etc Line costs.
Programmable LCD computer installations, a variety of expressions, real time monitor the working state of the curve of the test process and relevant operation.
Adopts frequency conversion control, adjustable rotary speed, better co operate with the scene of the production process works.
To adapt to different kinds of fabric and dyeing processing, the method of general configuration routine for 24 cups of 300ml.
Technical Parameter:
- Number of steel cup: 24
- Dyed cup material: stainless steel 316 l a stretch forming.
- Cup specification: 300 ml.
- Rotational speed: 0-45 rpm
- Operating temperature : room temperature to 14 0 ℃.
- Temperature control precision:±2℃
- Heating rate: 0.5 – 33 ℃ / min (full cup slightly lower, about 3 ℃ / min)
- Cooling: forced air cooling.
- Heat conduction medium: carborundum.
10 . Power specifications: 110V, 60Hz, Single phase
11 . Dimension : 750mm * 7 75mm * 775 mm (long * deep * high).
12 . Machine weight: about 195 kg.
Automatic Fabric Air Permeability Tester is used to test the air permeability of various woven fabrics, knitted fabrics, non-woven fabrics, industrial filter materials etc
Standards:
ASTM D737, ASTM D3574, AFNORG07-111, BS5636, DIN53,887,EDANA140.1, EN IS07,231, ENISO9,237, JIS L1096-A, TAPPI T251 and so on.
S Model: Manual replacement of the Orifice plate.
A Model: Automatic replacement of the Orifice plate.
- More excellent anti-jamming, more excellent stability, more rapid data transference speed.
- Adopt microcomputer control system, branded high accuracy pressure sensor, digital feedback and adjust air volume.
- Automatic orifice plate replacement, no manual replacement .
4.Automatic orifice plate replacement, no manual replacement
- Automatic follow, measure and display pressure difference of each point with high stability and repeatability.
- All plates have been calibrated by-point in full testing range to let test data more accuracy.
- All test data is displayed by large high-definition large color touch screen displayer, no need to calculate test result by hands.
- Automatic converse air permeability rate and air permeability volume to improve test efficiency.
- Large touch screen displayer and controller.
- Adopt micro-computer control, insure the test data accuracy and test data can be saved and processed automatically.
- Special designed sample holder accomplish test in box and ensure the yarn without slip.
- Equipped with the inner printer, test report can be printed anywhere.
- Testing procedure can be set conveniently by the inner control panel.
- 14 With the function of saving data when power-down.
- Professional software support to output results to PC.
Technical Parameters:
- Working pattern: high precision imported pressure sensor, touch screen control, printing and testing report
- Pressure volume : 50-500Pa
- Specimen thickness: ≤12mm
4 .Measuring accuracy : ≤±2%
- Test area/diameter: 20 cm2, 38 cm2 Optional : 50 cm2,100cm2, 5 cm2, φ50mm
- Units: Total 8 Units to can be freely switched: mm/s, L/m2/s, L/dm2/min, cm3/cm2/s, ft3/ft2/min, m3/m2/min, m3/m2/h, dm3/s
- Orifice plate: 8 Pcs ( Φ0.5mm, Φ1.0mm, Φ1.5mm, Φ2.5mm, Φ4.5mm, Φ8.0mm, Φ14.5mm, Φ26mm)
- Calibration : unique calibration board
- Permeability ratio range: 0.2-11000mm/s (L/m2.S)
- External Dimensions: 700x1000x1000mm
- Gross Weight: 100kg
- Power source: 220V±10% 50HZ
To alter the specification or modify the appearance without notice right is reserved
This Tabletop spectrophotometer has the advantage of excellent inter-instrument agreement, high accuracy and good replicability.
It could meet your requirement for both color quality control and color matching very easily.
Brief Introduction
- Transmission D/0 Structure and Reflection D/8 Structure
- Double Optical Paths Spectral Analysis Technology.
It could get the measurement sample data and internal environment data at the same time to make sure the testing accuracy and
stability for long time running.
- Compatible with SCI/SCE Measurement.
Adopt D/8 illuminant condition recommended by the CIE to meet the color testing requirement for different industries. It could measure with SCI and SCE to see the color data change more clearly.
- Four Testing CalibersIt is easy to adjust the testing calibers.The largest caliber diameter reaches 25.4mm. It could test the sample with different sizes.
This is not only suitable for testing the color of opacity sample, but also suitable for transparent or translucent sample’s transmittance and turbidity.
- Large screen display and Stand-alone operation.It could finish the sample test without connecting with the computer. Large screen display to make sure customer could see the testing result directly and clearly and it will be more convenient to set the instrument status. The color quality management software and color match software are optional according to customer’s need.
- Unique Calibration Board Design.Fix the calibration board on the testing caliber to make sure the accuracy of the white calibration and guarantee the high accuracy for measurement.
- Flexible Test Fixture.It could fix the sample with different size and thickness on the testing port tightly in case of stray light entering to affect the testing accuracy.
Technical Data:
| Type | XHF-CS-820 | |
| Measurement Condition | Reflection: d/8(Diffused lighting, 8 degrees receiving) Compatible with SCI/SCE Measurement ISO7724/1、DIN5033 Teil7、JIS Z8722 condition C、CIE No.15、ASTM E1164）Transmission d/0(Diffused lighting, Vertical direction receiving) | |
| Size of integrating sphere | Φ15.2cm, Alvan diffused reflection surface coating | |
| Illumination Light source | CLEDs(entire wavelength balanced LED light source） | |
| Sensor | dual light path sensor array | |
| Wavelength range | 400-700nm | |
| Wavelength interval | 10nm | |
| Half spectral width | 5nm |
| Reflectivity range | 0-200% | |
| Reflectivity resolution | 0.01% | |
| Observation angle | 2°/10° | |
| Measurement light source | A,C,D50,D55,D65,D75,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12
CWF,U30,DLF,NBF,TL83,TL84 |
|
| Data being displayed | SPD distribution/data, sample’s color values, color difference Values / graph, pass/fail results, color error tendency, history data color
simulation, manual input standard sample, generate measurement report |
|
| Measurement time interval | 2 seconds | |
| Large Aperture (LAV):2.54cm (=1inch) | ||
| Reflection Aperture | Medium Aperture (MAV):1.5cm(=0.6inch) | |
| Small Aperture (SAV):0.75cmx1.0cm(0.3inch x 0.4inch) | ||
| Very Small Aperture (VSAV):0.3cmx0.8cm(0.12inch x 0.31inch) | ||
| Color space | CIE-L*a*b,L*C*h,CIE-L*u*v,XYZ,Yxy,Transmittance, Hunterlab, | |
| Munsell MI,CMYK, RGB，HSB | ||
| Color difference formulas | ΔE*ab,ΔE*CH,ΔE*uv,ΔE*cmc(2:1),ΔE*cmc(1:1),ΔE*94,ΔE*00 | |
| ΔEab(Hunter),555color classification | ||
| Other colorimetric indices | WI(ASTM E313-10,ASTM E313-73,CIE/ISO, AATCC, Hunter, Taube
Berger, Ganz, Stensby),YI(ASTM D1925，ASTM E313-00,ASTM E313-73),Tint(ASTM E313-00,CIE,Ganz),Metamerism index Milm, Stick color fastness, Color fastness, APHA, Pt-Co, Gardner |
|
| Repeatability | light splitting reflectivity: standard deviation within 0.08% color values: ΔE*ab<=0.015(After calibration, standard deviation of 30 measurements on test white board, 5 second intervals, Maximum: 0.03 | |
| Interface | USB | |
| Data storage | mass storage | |
| Light source longevity | 5 years, 1.5 million tests | |
| Size | 583*330*304mm(L*W*H) | |
| Work temperature range | 15℃-32℃ (60°F-90°F) | |
| Relative Humidity | 0℃ to 45℃，relative humidity 80% or below at 35°C, no condensation | |
| Standard accessories | AC power line, color management software, drive software, USB
cable, black/white calibration tube, 40*10 cuvette, cuvette support, testing report |
|
| Optional | 40×40 cuvette | |
Introduction :
Application scope of XHF-05 Martindale Abrasion & Pilling Tester : suitable for the wear-resistance and grinding test under certain pressure of woven and wool-blend fabrics, Leather, knitted goods and non-woven fabric
Standards: ISO5470, IWS TM112/196, DIN53863/53865, BS3424/5690, BS EN 388/530, JIS L1096, ASTM D4966/4970 , ISO17079-2, ISO 12947, ISO17704, ISO 20344, ISO 17076-2, SATRA TM31 and so on.
Features of touch screen Martindale:
1.Machines with two Lissa-jous trajectory.
2.Using color touch-screen operation, PLC control, each working position can be controlled separately.
- Motor overheat protection, convenient operation.
- There is a alarm when the test is finished.
- Data can be restored after the power failure.
Technical Parameters:
Work-station number : 6 or 9 pcs
Counter display : Pre-set counter display: 0-999999
Cumulative counter display: 0-999999
Abrading table diameter : 120mm
Test pressure (abrasion test)
A: cloth specimen clamp:198g +/- 2g
B: textile specimen hammer:395g +/-2g (Equal to 9Kpa)
C: furniture deck specimen hammer:594g +/-2g (Equal to 12Kpa)
Pressure test (pilling test)
A: cloth specimen clamp:155g +/-1g
B: textile specimen hammer:260g +/-1g
Weight of Load hammer: 2385g +/-10g
Dimension: 850mm\ x 600mm x 400mm
Weight: Machine 120kgs Accessories box: 22kgs Voltage supply:220V/110V, 50HZ/60Hz
Packing list
| No. | Name | Quantity | Remark |
| 1 | Abrasion tester | 1 | Main body |
| 2 | Pin Shaft | 6 or 9 | |
| 3 | Hammer | 1 | |
| 4 | Lissa-jous trace pen | 1 | |
| 5 | Dia 140 sample cutter | 1 | |
| 6 | Dia 38 sample cutter | 1 | |
| 7 | Dia 90 sample cutter | 1 | |
| 8 | Weights | 12 or 18 | 395g, 594g each 6 pcs |
| 9 | Specimen clamps | 12 or 18 | dia38mm, dia90mm each 6 pcs |
| 10 | Abrasion table | 6 or 9 | |
| 11 | Specimen fix ring | 6 or 9 | |
| 12 | Rubber rings | 12 or 18 | For installing dia90mm specimen |
| 14 | Load disc | 6 or 9 | |
| 15 | Accessories Case | 2 | Aluminum-Alloy Case |
The scope of application:
Used in a variety of textiles, non‐ woven fabric, leather and other materials, while force (flexible diaphragm law ) in latitude and longitude and in all directions , expansion force and dilation of the performance measurement .
Related standards: ASTM D3786, ISO 13938.1
Instrument characteristics:
- Use 16bit Industry‐grade MCU (ATMEL, US A), more excellent anti ‐jamming, more excellent stability
- Print t he test reports by built‐in thermal printer
- Dial pressure mete r to show pressure applied to specimen
- Proveded with a touch screen readout of pressure, time of burst,
- height of burst and the peak hold facility
- High quality and renewable rubber diaphragms, manual griping device, and forward reverse and neutralal drive sys tem.
Technical Parameters:
| Test Area | φ30 .5±0.05mm (7.3cm2) | ||
| Test Area | φ79 .8mm±0.05 mm (50cm2 ) | ||
| Capacity | 0~6MPa (6000K pa) | ||
| Fluid rate | Adjustable | ||
| Bursting strength accuracy | ±0. 5%FS | ||
| Hydraulic fluid | glycerin with concentration 85% | ||
| Power supply | Ac220V 50Hz/110V, 60Hz | ||
| Instrument dimension | 560 ×400×680mm(L×W×H) | ||
| weight | 70kg | ||
| Packing list of XHF‐16 | |||
| No. | Name | Quantity | Remark |
| 1 | Bursting Strength Tester | 1 | Main body |
| 2 | Diaphragm | 5 | |
| 3 | Specimen holders | 1 set | φ30.5± 0.05mm |
| 4 | Specimen holders | 1 set | φ79.8mm±0.05mm |
| 4 | Spanner | 1 | Disassemble Holders |
To determine the color fastness of textiles to dry or wet rubbing.
A pinned acrylic sample holder ensures rapid sample mounting and repeatability of results. Fitted with a pre‐determined electronic counter for strokes up to 9999,
Standards: ISO105‐X12, D02, Bs1006 D02, DIN54021, IWS Tm165, JIS K6328.
Technical Parameter:
Testing Time: 1‐99999
Rubber Travel: 104/100mm (Can be adjust)+/- 3mm
Rubbing Speed: 60r/min
Rubbing pressure: 9N
Rubbing Head: Roundness:φ16mm
Dimension: 600mm x 225mm x 270mm
Weight: 11kgs
Power Source: AC 220V, 50Hz
Accessories:
Rubbing clothing 1 (box)
Sand paper 2 (pcs)
Rings 2 (pcs)
The Vertical Fabric flammability tester is used for testing trend of after flame, flame retardant and carbonization of camping tentage.. It is automatically determine the flammability resistance to a vertical flame of camping tentage.
Characteristics:
1 . Use PLC touch screen control
- Electric automatically burner, light clocking set freely from 0-999.9s.
- Burning chamber is stainless steel.
- Flame height can be adjusted
- Automatically burner orientation
Standards: CPAI 84 Flammability Test Method Wall and Top Material
| Technical Parameters : | ||
| Vent Holes | Top 16 pcs, Two sides, each 6 pcs, diameter: 13mm | |
| Time range and accuracy | 0.0-999.9S, resolution 0.1S (adjustable) | |
| Burner | Inner diameter: 5mm, barrel: 75mm | |
| Distance between burner and | 20mm | |
| specimen | ||
| Flame Height | 38mm (adjustable) | |
| Ignition time in test | 12S (adjustable) | |
| Specimen Size | 300x70mm | |
| Inner dimension of clamp | 360x50mm | |
| Load weights | 50g, 100g, 200g, 350g | |
| Dimensions | 600 x 400x850mm | |
| Weight | 35kg | |
| Power source | 110V/220V, 50Hz/60Hz | |
Jigger Dyeing Machine is suitable to test the dyeing of cotton and linen cloth, viscose, man-made fiber, etc., and suitable for dye material, such as direct dyes, acid dyes, basic dyes, insoluble azo dyes, and reactive dyes, etc. This apparatus can achieve bleaching and dyeing with low-liquor ratio, simulates as nearly as possible the mechanism of production jigs.
Jigger Dyeing Machine is specially designed to satisfy the requirements of testing dye formula before quantity production of dyeing and finishing enterprise. This apparatus simulates as nearly as possible the mechanism of production jigs’ requirements of speed, temperature, pre-tension, etc. of real production process. Compared with production machine, this Laboratory Jig Dyeing Machine’s size is smaller, consumes small quantity of dye, and with short testing process, so operator is easier to change dye formula, and finds suitable dye formula in a short time. Therefore this machine is well welcomed by many dyeing and finishing enterprise
Manual Operation Mode Interface
Technical Parameter:
Control Mode: Touch Screen+ PLC
Effective Roller Width: ≤500mm
Roller Diameter: F 57mm- F 200mm
Cloth speed :0.5-8m/min +/- 0.001 m/min
Temperature Range and accuracy: Room Temperature -98℃+/- 2℃
Temperature Ratio: 1-3 ℃
Tension: 0-18kgs
Material tension control mode: the difference speed between A and B roller.
Cooling: automatic water cold system
Power: AC 380V, 50Hz
This Button Pull Snap Tester is the unique safety test instrument that provides a means to accurately measure how safe accessories are attached in a product. It is also used to compare a variety of accessories from different vendors in the process from product design to production. It is a simple but effective design mainly consisting of a high precision gauge, a sturdy stand and special grips/clamps. It requires very little train. A sample required by standards & regulations is to be fixed horizontally (constant force is applied to secure the sample) so that snap or other accessories attached in fabric can be clamped into.
It can be used in buttons, zippers, toys testing for many brands like NEXT, M&H, GAP, M&S, NIKE, LIVIS, and other famous brands necessary attachments are available.
.
Standards:16 CFR 1500.51~53、ASTM F963、EN71-Part 1、M&S P115A., H&M, NEXT etc
Standard package 1-16:
1- Imada Force Gauge FB-30K
2- Upper Stud Grip
3- Upper Grasp Button Grip (Upper Tip-Top Grip)
4- Lower Fabric Clamp
5- Low Grasp Button Accessories Kit
6- Three Pronged Clamp
7- Calibration Weight 15LB
8- Mechanical Stand for Imada Force Gauge
9- Upper Long Nose Vise Grip
10- Upper Universal Grip
11- Button snap attachment
12- Extension rod for lower clamp
13- Allen key for handling fitting (2mm)
14- Protective goggles
15- Supper rubber O rings 5 pcs.
16- Operation Manual
Used for testing the fastness to dry or wet rubbing and the fastness to brushing of all kinds of colored textiles, motorized operation, auto stop when counts reach pre-set counts..
Features:
- Adopt linear slide, running more smooth
- Rubbing head always keep horizontal, no matter thickness of specimen,
no adjust position of rubbing head, easier operation.
- Adopt block pressing method, better clamping specimen.
Standards: ISO105-X12, D02, Bs1006 D02, DIN54021, IWS Tm165, JIS K6328. AATCC8/165
Technical Parameter :
| Testing times | 1-99999 |
| Rubbing travel | 104±3mm |
| Rubbing speed | 60r/min |
| Rubbing pressure | 9N |
| Rubbing head | Roundness :ф 16mm |
| External Dimensions | 600mm×225mm×270mm |
| Weight | 12kgs |
| Power | AC 220V, 50Hz |