Densiometer X-Rite CAPSURE

This Button Pull Snap Tester is the unique safety test instrument that provides a means to accurately measure how safe accessories are attached in a product. It is also used to compare a variety of accessories from different vendors in the process from product design to production. It is a simple but effective design mainly consisting of a high precision gauge, a sturdy stand and special grips/clamps. It requires very little train. A sample required by standards & regulations is to be fixed horizontally (constant force is applied to secure the sample) so that snap or other accessories attached in fabric can be clamped into.

It can be used in buttons, zippers, toys testing for many brands like NEXT, M&H, GAP, M&S, NIKE, LIVIS, and other famous brands necessary attachments are available.

.

 Standards:16 CFR 1500.51~53、ASTM F963、EN71-Part 1、M&S P115A., H&M, NEXT etc

Standard package 1-16:
1- Imada Force Gauge FB-30K
2- Upper Stud Grip
3- Upper Grasp Button Grip (Upper Tip-Top Grip)
4- Lower Fabric Clamp
5- Low Grasp Button Accessories Kit
6- Three Pronged Clamp
7- Calibration Weight 15LB
8- Mechanical Stand for Imada Force Gauge
9- Upper Long Nose Vise Grip
10- Upper Universal Grip
11- Button snap attachment
12- Extension rod for lower clamp
13- Allen key for handling fitting (2mm)
14- Protective goggles
15- Supper rubber O rings 5 pcs.
16- Operation Manual

Application:

Digital Elmendorf Tear Tester, A computer controlled falling-pendulum instrument, to determine the ballistic tearing strength of textiles, plastics, paper or board.

It enables rapid determination of the dynamic resistance of materials designed to be subjected to strong shearing loads (e.g. fabrics) or liable to be damaged by sharp or heavy objects (e.g. paper bags). Subsequently, the test was naturally adopted for all materials in the form of sheet or films, cardboards, cloth, knitted fabrics, plastic films, aluminum foil, non-woven fabrics, complex flexible packaging etc. But does not apply to sparse fabric or stretch materials which tearing direction might be shift in test.

Procedure: The test is carried out on a specimen composed of one or more sheets of standard dimensions 100 x 63 mm, a crack in length of 20 mm of specimen is notched automatically, a usually with a distance of 43mm (1.7 in) remaining to be torn after initiating the tear. The energy of a pendulum of suitable weight is used to completely tear the specimen. The difference in the angle from the vertical of the center of gravity of the pendulum between the downswing and upswing is a measure of the energy absorbed in tearing the sample

This angular movement is measured with a digital encoder and is immediately converted to the mean tearing force for a single sheet by the microprocessor and software incorporated in the apparatus.

Standard: BS 4253, ASTM D1424/5734 , DIN 53862, BS EN ISO 13937, ISO1974/9290.

     Features:

     Works in accordance with all known test standards. RS-232 data output, equipped Tearing Test software Auto specimen notching

    Repeatable, pneumatic specimen gripping system guarantees sufficient clamping pressure to avoid all slipping phenomena,

    thus ensuring perfect reproducibility of the experimental conditions.

    Automatic compensation for friction and leveling errors, no slave pointer, therefore no friction, alignment and maintenance problems.

    Unit: N, gf, cN, Cp can be selected.

Specifications:

1. Testing range: A hammer: 0～16N B hammer: 0～32N C hammer: 0～64N D hammer: 0～128N
2. Testing accuracy:≤±0.2％F·S
3. Tearing length:43mm
4. Length of automatic cut:20±0.1mm
5. Sample size:100×63mm
6. Type of sample clamping: pneumatic clamping
7. Power source:AC220V50Hz
8. External dimension:520×380×700mm
9. Weight: 68kg

Packing list of

This Fabric shrinkage tester is used for testing the shrinkage and relaxation after washing of various textiles such as cotton, wool, silk, linen, chemical fiber, knitwear, costume etc. It is fit for the factory and testing center with the long-term test.

  Standards:ISO-6330-2012, ISO 5077, IWSTM31, BS4923, EN25077/26330, JISL1909, FZ/T70009.

 Features :

 The apparatus used are for industrial design, suit to the harsh long continuous testing requirements

Suspended inner canister exclusive used, smoothly operation without vibration

Include 12 groups washing programes, users can prepare 6 groups their own shrinkage procedures, and provide programs storage

Variable frequency control technology used, to protect the electrical safety and the smooth operation.

Large touch screen display, figures show clearly

Using high-precision pressure sensors, to ensure that accurate and reliable water level.

 Outside and inside fully use stainless steel.

Technical parameters:

Yarn count machine works with textile electronic balance is a kind of intellectual measuring instrument with weighing, counting and other many functions. The product introduces imported Integrated circuit and enjoys stable and reliable performance, easy operation and accurate weighing and counting. As a kind of measuring instrument, it has been widely used by enterprises and scientific research institutions.

Function:

It has: g,oz,tex,Nm,Ne,D,g/m²kinds of the units to change. Select 1-10 pcs specimen measurement

It can print the date, time, specimen length, each weighing value, calculated MIN (minimum), MAX (maximum), SUM (sum), AV (average), CV% (non-uniform rate). Overload malfunction indication.

 Working Condition:

Working Temperature:                         0°～40°C

Maximum Consumed Power:              3W

Pan Size: Diameter 80mm

Power Supply:     Adaptor    input -220V±10﹪, 50HZ±1HZ。Output- 9v，300mA

Comparative Humidity:    50﹪～85﹪

Range: 210g

Accuracy: 1mg (0.001g)

Standard Configuration: Balance, Printer, Calibration Weight

This machine is used to determine not only the fabric hydrostatic pressure resistance, but also the hydrostatic pressure proof performance of the coating materials.

Standards: ISO-811, AATCC 127, BS EN20811, ISO 1420

Features:

 Microcomputer control, English LCD menu, four built-in test methods .

The built-in tank design, creative balance system of water pressure rate, rising speed stability and accuracy.

Clamp made of stainless steel, equip LED light to view specimen clearly

Testing Methods:

Turbocharged  Constant pressure time

(It means at the constant pressure, how long can appear the first water drop on the specimen)

Constant pressure regularly (It means at the constant pressure and specify time,

if can appear water drop on the specimen).

Leakage water method

Technical Parameter:

Testing range: 0.5kpa-200kpa

Accuracy: 0.2%F.S

Elevation Speed: 1kpa-30kpa

Clamp Area: 100cm²

Testing Units:（pa  mmHg     cmH₂O）

Power: AC 220V 50Hz

Dimension: 550x400x500mm

Weight: 55kg

Use: Suitable for high temperature (or normal temperature) dyeing, washing, dry-cleaning and samples colorfastness test.

Applied Range:

Suitable f or all kinds of yarn and fabric dyeing experiments, especially for N, N/C, T/N and other kinds of knitted and woven cloth, spandex lake, have better levelness and reproducible.

Features:

With internal heating type silicon carbide heat conduction, to avoid the old infrared machine with heat conduction oil as heat carrier inflammable and explosive fatal flaw.

Use stainless steel infrared heater, compared with the external heating infrared glass lamp life long, long time.

Without glycerin, lampblack pollution; Due to the adopted high-power air cooling system, and therefore there is no loss of cooling water;

Heating power is only 1/3 of the traditional oil heat infrared machine, and heat preservation, constant temperature effect is good, save water, electricity, etc Line costs.

Programmable LCD computer installations, a variety of expressions, real time monitor the working state of the curve of the test process and relevant operation.

Adopts frequency conversion control, adjustable rotary speed, better co operate with the scene of the production process works.

To adapt to different kinds of fabric and dyeing processing, the method of general configuration routine for 24 cups of 300ml.

Technical Parameter:

1. Number of steel cup: 24

2. Dyed cup material: stainless steel 316 l a stretch forming.

3. Cup specification: 300 ml.

4. Rotational speed: 0-45 rpm

5. Operating temperature : room temperature to 14 0 ℃.

6. Temperature control precision:±2℃

7. Heating rate: 0.5 – 33 ℃ / min (full cup slightly lower, about 3 ℃ / min)

8. Cooling: forced air cooling.

9. Heat conduction medium: carborundum.

10 . Power specifications: 110V, 60Hz, Single phase

11 . Dimension : 750mm * 7 75mm * 775 mm (long * deep * high).

12 . Machine weight: about 195 kg.