Digital Elmendorf Tear Tester
Application:
Digital Elmendorf Tear Tester, A computer controlled falling-pendulum instrument, to determine the ballistic tearing strength of textiles, plastics, paper or board.
It enables rapid determination of the dynamic resistance of materials designed to be subjected to strong shearing loads (e.g. fabrics) or liable to be damaged by sharp or heavy objects (e.g. paper bags). Subsequently, the test was naturally adopted for all materials in the form of sheet or films, cardboards, cloth, knitted fabrics, plastic films, aluminum foil, non-woven fabrics, complex flexible packaging etc. But does not apply to sparse fabric or stretch materials which tearing direction might be shift in test.
Procedure: The test is carried out on a specimen composed of one or more sheets of standard dimensions 100 x 63 mm, a crack in length of 20 mm of specimen is notched automatically, a usually with a distance of 43mm (1.7 in) remaining to be torn after initiating the tear. The energy of a pendulum of suitable weight is used to completely tear the specimen. The difference in the angle from the vertical of the center of gravity of the pendulum between the downswing and upswing is a measure of the energy absorbed in tearing the sample
This angular movement is measured with a digital encoder and is immediately converted to the mean tearing force for a single sheet by the microprocessor and software incorporated in the apparatus.
Standard: BS 4253, ASTM D1424/5734 , DIN 53862, BS EN ISO 13937, ISO1974/9290.
Features:
Works in accordance with all known test standards. RS-232 data output, equipped Tearing Test software Auto specimen notching
Repeatable, pneumatic specimen gripping system guarantees sufficient clamping pressure to avoid all slipping phenomena,
thus ensuring perfect reproducibility of the experimental conditions.
Automatic compensation for friction and leveling errors, no slave pointer, therefore no friction, alignment and maintenance problems.
Unit: N, gf, cN, Cp can be selected.
Specifications:
- Testing range: A hammer: 0~16N B hammer: 0~32N C hammer: 0~64N D hammer: 0~128N
- Testing accuracy:≤±0.2%F·S
- Tearing length:43mm
- Length of automatic cut:20±0.1mm
- Sample size:100×63mm
- Type of sample clamping: pneumatic clamping
- Power source:AC220V50Hz
- External dimension:520×380×700mm
- Weight: 68kg
Packing list of
No. | Name | Qty | Remark |
1 | Tearing Tester | 1 Set | |
2 | Cutting Templates | 1 Pc | For preparing Specimen |
3 | Cutting Knifes | 1 Pc | For preparing Specimen |
4 | Weights | 1 Set | |
5 | Software | 1 | |
6 | Air Compressor | 1 | Optional |
$5,400.00
Related Products
The Vertical Fabric flammability tester is used for testing trend of after flame, flame retardant and carbonization of camping tentage.. It is automatically determine the flammability resistance to a vertical flame of camping tentage.
Characteristics:
1 . Use PLC touch screen control
- Electric automatically burner, light clocking set freely from 0-999.9s.
- Burning chamber is stainless steel.
- Flame height can be adjusted
- Automatically burner orientation
Standards: CPAI 84 Flammability Test Method Wall and Top Material
Technical Parameters : | ||
Vent Holes | Top 16 pcs, Two sides, each 6 pcs, diameter: 13mm | |
Time range and accuracy | 0.0-999.9S, resolution 0.1S (adjustable) | |
Burner | Inner diameter: 5mm, barrel: 75mm | |
Distance between burner and | 20mm | |
specimen | ||
Flame Height | 38mm (adjustable) | |
Ignition time in test | 12S (adjustable) | |
Specimen Size | 300x70mm | |
Inner dimension of clamp | 360x50mm | |
Load weights | 50g, 100g, 200g, 350g | |
Dimensions | 600 x 400x850mm | |
Weight | 35kg | |
Power source | 110V/220V, 50Hz/60Hz | |
Yarn count machine works with textile electronic balance is a kind of intellectual measuring instrument with weighing, counting and other many functions. The product introduces imported Integrated circuit and enjoys stable and reliable performance, easy operation and accurate weighing and counting. As a kind of measuring instrument, it has been widely used by enterprises and scientific research institutions.
Function:
It has: g,oz,tex,Nm,Ne,D,g/m2kinds of the units to change. Select 1-10 pcs specimen measurement
It can print the date, time, specimen length, each weighing value, calculated MIN (minimum), MAX (maximum), SUM (sum), AV (average), CV% (non-uniform rate). Overload malfunction indication.
Working Condition:
Working Temperature: 0°~40°C
Maximum Consumed Power: 3W
Pan Size: Diameter 80mm
Power Supply: Adaptor input -220V±10﹪, 50HZ±1HZ。Output- 9v,300mA
Comparative Humidity: 50﹪~85﹪
Range: 210g
Accuracy: 1mg (0.001g)
Standard Configuration: Balance, Printer, Calibration Weight
Ozone Test Chamber is used to determine the colorfastness of textiles
when it is exposed to ozone in the atmosphere at room temperature..
Features:
The instrument consists of a stainless steel experimental chamber and a fully enclosed gas circuit for the production of ozone by silent discharge. The entire ozone gas generated and captured is enclosed to ensure personal safety. Ozone aeration chamber: composed of ozone generator, fan, baffle, sample compartment.
Standard: AATCC 109, ISO 105 G03
Temperature control range | 0-80℃, control accuracy: +-0.2℃ |
Humidity control range | 30-98%,ontrol accuracy: +-2% |
Ozone concentration | 0-200p.p.h.m,control accuracy:+-1p.p.h.m |
Ozone chamber size | 500mm (W)x400mm(D)x400mm (H) |
Sample Hanger | 2 layers |
Weight | 90Kgs |
Ozone generation system | |
The system uses high-precision ceramic high-voltage plate discharge. | |
Ozone concentration range | random setting 0-500pphm |
Ozone removal device | Activated carbon |
Ozone detection system | |
Detection range | 0-200pphm |
Measurement accuracy | +-2%,display resolution:0.1pphm |
Fabric Thickness tester is applicable of measuring the thickness o f tissue pap er, woven, knitted fabric s, non- woven and o ther uniform materials. It is designed according to
Standards: ISO5084 ,FZ/T6000 4, ISO9073, ISO 98 63….etc.
Technical Para meter :
Thickness measuring range : 0-25mm
Min. graduation value : 0.001 mm
Press foot diameter: 11.28mm , 50.48 mm, 56.42 mm, 112.84 mm
Press er foot area : 100, 2000, 2500, 1000 0(mm2)
Weighing poise : 5cN*1, 10cN*2, 50cN*2, 100cN*1,4 00cN*1,1000 cN*1 (combine)
Press time: 10s,30s
Test speed: when press time is 10s, about 2.1 times/minutes; when press time is
30s, 1.2 times/minutes.
Weight : 30kg
External Dimensions : 210x450x400mm
Power source : A C220V±10% 50Hz
Jigger Dyeing Machine is suitable to test the dyeing of cotton and linen cloth, viscose, man-made fiber, etc., and suitable for dye material, such as direct dyes, acid dyes, basic dyes, insoluble azo dyes, and reactive dyes, etc. This apparatus can achieve bleaching and dyeing with low-liquor ratio, simulates as nearly as possible the mechanism of production jigs.
Jigger Dyeing Machine is specially designed to satisfy the requirements of testing dye formula before quantity production of dyeing and finishing enterprise. This apparatus simulates as nearly as possible the mechanism of production jigs’ requirements of speed, temperature, pre-tension, etc. of real production process. Compared with production machine, this Laboratory Jig Dyeing Machine’s size is smaller, consumes small quantity of dye, and with short testing process, so operator is easier to change dye formula, and finds suitable dye formula in a short time. Therefore this machine is well welcomed by many dyeing and finishing enterprise
Manual Operation Mode Interface
Technical Parameter:
Control Mode: Touch Screen+ PLC
Effective Roller Width: ≤500mm
Roller Diameter: F 57mm- F 200mm
Cloth speed :0.5-8m/min +/- 0.001 m/min
Temperature Range and accuracy: Room Temperature -98℃+/- 2℃
Temperature Ratio: 1-3 ℃
Tension: 0-18kgs
Material tension control mode: the difference speed between A and B roller.
Cooling: automatic water cold system
Power: AC 380V, 50Hz
Multipurpose Flammability Tester automatically determine the flammability resistance to a vertical flame of apparel fabrics, protective fabrics, curtains and children’s sleepwear.
Standard: BS EN ISO 6940, EN ISO 6941, BS 5438, EN ISO 15025
Technical Parameter:
Ignition of the time range:0-99.99S
Precision: 0.01S
Continued burning time:0-999.9S
Ignition fire mouth: According to ISO 6941 Standard
Fire Mouth angle: 0°/30°/90°(Adjustable)
Flame Measurement Height: 20mm/40mm
Dimension inside U clamp: 80mmx600mm
Mark line on U clamp: adjustable
Dimension:800mmX550mmX660mm
Weight: 50kgs
Power: AC 220V/110V
Used in a variety of textiles, non- woven fabric, leather and other materials, while force ( flexible diaphragm law ) in latitude and longitude and in all directions , expansion force and dilation of the performance measurement .
Integrated safety shied
Provided with a touch screen readout of pressure, time of burst, height of burst
Big touch screen operation, also can use PC operation.
High quality and renewable rubber diaphragms, manual griping device, and forward reverse and neutral drive system
High quality AC servo motor driven
Related standards : ASTM D3786, ISO 13938.1, BS 3424 (PT. 6), ISO 3033-B, EN 12332-2
Features:
Hydraulic pressure to 6000Kpa
Quick change bells
Diaphragm correction
Automatic flow rate adjustment
Software analysis for full results
Distension measurement up to 70mm
Technical Parameters :
Capacity 0~6MPa (6000Kpa)
Test Speed Adjustable, 20-800ml/min
Bursting strength accuracy ±0.5%FS
Hydraulic fluid glycerin with concentration 85%
Used for testing the fastness to dry or wet rubbing and the fastness to brushing of all kinds of colored textiles, motorized operation, auto stop when counts reach pre-set counts..
Features:
- Adopt linear slide, running more smooth
- Rubbing head always keep horizontal, no matter thickness of specimen,
no adjust position of rubbing head, easier operation.
- Adopt block pressing method, better clamping specimen.
Standards: ISO105-X12, D02, Bs1006 D02, DIN54021, IWS Tm165, JIS K6328. AATCC8/165
Technical Parameter :
Testing times | 1-99999 |
Rubbing travel | 104±3mm |
Rubbing speed | 60r/min |
Rubbing pressure | 9N |
Rubbing head | Roundness :ф 16mm |
External Dimensions | 600mm×225mm×270mm |
Weight | 12kgs |
Power | AC 220V, 50Hz |
This machine is suitable for dyeing in common temperature (20℃-100℃)
and the operation is simple. Neutral alkali, salt and other additions can be softly added during the process of dyeing.
It also applies to the cotton bath, soap and bleached experiment
Features:
Equip imported motor with large Angular moment from Taiwan.
The shell is made of stainless steel S.S304 material
Programmable Temperature controller and PT-100 probe
Technical Parameter:
Number of Beaker: (24Cups)
Beaker Specification: 250cc Triangular Glass Beaker
Oscillation Speed: 30-200 reciprocation/min
(shaking from right to left)
Temperature Range: Room Temperature – 100℃
Heating: Electrical Heating
Power Supply: 4kw, AC220V, 50HZ
Overall Dimension (L*W*H): 106*55*72c m
Included: 250cc Triangular glass Beaker
The GSM Cutter is for sampling the materials of fabrics and non-fabrics.
The handle is made of aluminum alloy, no broken, Star structure is designed according to the
human touch.
Adopt the high-carbon blade (white); press plate is made of aluminum alloy, not rust, Tight press.
here are 16 stainless steel cross screws on the press plate , make it firm and not slide ,
no rust .
The cutter’s face adopt international advanced T-shaped anti-slip groove structure; minimize the stress in the tangent direction during the cutting and reduce hand fatigue, also ensure that the sample is flat and not slip, a precise cutting .
Adopt the thickness adjustable structure to protect the blade and pad.
It use cork pad, not rubber pad.
Standard: ISO3801, BS2471, ASTM D3776, IWS TM13
Technical Parameter:
Sample area: 100cm2
Max. Cutting thickness: 5mm
External Dimensions: 156×112
Accessories: 2 cutting pads included
4 Extra cutting Blades included (Made in UK)
Automatic Fabric Air Permeability Tester is used to test the air permeability of various woven fabrics, knitted fabrics, non-woven fabrics, industrial filter materials etc
Standards:
ASTM D737, ASTM D3574, AFNORG07-111, BS5636, DIN53,887,EDANA140.1, EN IS07,231, ENISO9,237, JIS L1096-A, TAPPI T251 and so on.
S Model: Manual replacement of the Orifice plate.
A Model: Automatic replacement of the Orifice plate.
- More excellent anti-jamming, more excellent stability, more rapid data transference speed.
- Adopt microcomputer control system, branded high accuracy pressure sensor, digital feedback and adjust air volume.
- Automatic orifice plate replacement, no manual replacement .
4.Automatic orifice plate replacement, no manual replacement
- Automatic follow, measure and display pressure difference of each point with high stability and repeatability.
- All plates have been calibrated by-point in full testing range to let test data more accuracy.
- All test data is displayed by large high-definition large color touch screen displayer, no need to calculate test result by hands.
- Automatic converse air permeability rate and air permeability volume to improve test efficiency.
- Large touch screen displayer and controller.
- Adopt micro-computer control, insure the test data accuracy and test data can be saved and processed automatically.
- Special designed sample holder accomplish test in box and ensure the yarn without slip.
- Equipped with the inner printer, test report can be printed anywhere.
- Testing procedure can be set conveniently by the inner control panel.
- 14 With the function of saving data when power-down.
- Professional software support to output results to PC.
Technical Parameters:
- Working pattern: high precision imported pressure sensor, touch screen control, printing and testing report
- Pressure volume : 50-500Pa
- Specimen thickness: ≤12mm
4 .Measuring accuracy : ≤±2%
- Test area/diameter: 20 cm2, 38 cm2 Optional : 50 cm2,100cm2, 5 cm2, φ50mm
- Units: Total 8 Units to can be freely switched: mm/s, L/m2/s, L/dm2/min, cm3/cm2/s, ft3/ft2/min, m3/m2/min, m3/m2/h, dm3/s
- Orifice plate: 8 Pcs ( Φ0.5mm, Φ1.0mm, Φ1.5mm, Φ2.5mm, Φ4.5mm, Φ8.0mm, Φ14.5mm, Φ26mm)
- Calibration : unique calibration board
- Permeability ratio range: 0.2-11000mm/s (L/m2.S)
- External Dimensions: 700x1000x1000mm
- Gross Weight: 100kg
- Power source: 220V±10% 50HZ
To alter the specification or modify the appearance without notice right is reserved
Manual Crock meter is used for testing the fastness to dry or wet rubbing
and the fastness to brushing of all kinds of colored textiles, digital display.
Standards: ISO105-X12, D02, Bs1006 D02, DIN54021, IWS Tm165, JIS K6328. AATCC8/165
Technical Parameter :
Testing times 1-99999
Rubbing travel 104±3mm
Rubbing speed Manual
Rubbing pressure 9N
Rubbing head Roundness :ф 16mm
External Dimensions 620*160* 230mm
Optional Accessories:
AATCC crocking clothes 1Box (1000Pcs)
ISO Grey Scale
AATCC Grey Scale.