F-26 Tumble Dryer For AATCC, ISO

Application:

Digital Elmendorf Tear Tester, A computer controlled falling-pendulum instrument, to determine the ballistic tearing strength of textiles, plastics, paper or board.

It enables rapid determination of the dynamic resistance of materials designed to be subjected to strong shearing loads (e.g. fabrics) or liable to be damaged by sharp or heavy objects (e.g. paper bags). Subsequently, the test was naturally adopted for all materials in the form of sheet or films, cardboards, cloth, knitted fabrics, plastic films, aluminum foil, non-woven fabrics, complex flexible packaging etc. But does not apply to sparse fabric or stretch materials which tearing direction might be shift in test.

Procedure: The test is carried out on a specimen composed of one or more sheets of standard dimensions 100 x 63 mm, a crack in length of 20 mm of specimen is notched automatically, a usually with a distance of 43mm (1.7 in) remaining to be torn after initiating the tear. The energy of a pendulum of suitable weight is used to completely tear the specimen. The difference in the angle from the vertical of the center of gravity of the pendulum between the downswing and upswing is a measure of the energy absorbed in tearing the sample

This angular movement is measured with a digital encoder and is immediately converted to the mean tearing force for a single sheet by the microprocessor and software incorporated in the apparatus.

Standard: BS 4253, ASTM D1424/5734 , DIN 53862, BS EN ISO 13937, ISO1974/9290.

     Features:

     Works in accordance with all known test standards. RS-232 data output, equipped Tearing Test software Auto specimen notching

    Repeatable, pneumatic specimen gripping system guarantees sufficient clamping pressure to avoid all slipping phenomena,

    thus ensuring perfect reproducibility of the experimental conditions.

    Automatic compensation for friction and leveling errors, no slave pointer, therefore no friction, alignment and maintenance problems.

    Unit: N, gf, cN, Cp can be selected.

Specifications:

1. Testing range: A hammer: 0～16N B hammer: 0～32N C hammer: 0～64N D hammer: 0～128N
2. Testing accuracy:≤±0.2％F·S
3. Tearing length:43mm
4. Length of automatic cut:20±0.1mm
5. Sample size:100×63mm
6. Type of sample clamping: pneumatic clamping
7. Power source:AC220V50Hz
8. External dimension:520×380×700mm
9. Weight: 68kg

Packing list of

It is used for the test for drying process and the drying procedures needed by other textiles ,which are prescribed in the standard textiles.

Standard: BS EN ISO 6330-2012, AATCC 135, NEXT standards

Features:
Quality steel with hot coatings as outer shell, and drum is made of stainless steel.
The new impact design ensures silent running and safe operation.
Micro computer control drying temperature, automatic cooling before drying finished.
Digital electricity, hardware control, strong anti-interference ability.
With door open protection.
Drying time can be random selected.
Max loading capacity can reach 15kgs (rated 10kgs).
Technical Parameter:
Type: front-loading, horizontal drum
Rated specimen drying: 10kg
Drying time: room temperature-80℃
Drum diameter: 695mm
Drum depth: 435mm
Drum volume: 165L
Drum speed: 50 r/min
Lifting vanes number: 3 pcs, 120 ° between each one
Power: 220V, 50Hz, 5.5KW
Dimension: 785×960×1365mm
Weight: 100kgs

The scope of application:

It is used for color matching of any product under different lights, it is wide ly applied in Textile, toy, printing, plastic, rubber, chemical, ink, ceramic,

 leather, , paints, chemicals, footwear, leather, metal, food, cosmetics multi-industry field.

Meets to major international standards for visual color evaluation including:

 ASTM D17 29, ISO3664, DIN, ANSI and BSI.

Features:

1.  Tube length: 600mm
2.  Easy to operate by using individual switches for each light source.
3.  Elapsed time meter for tracking optimal l amp replacement.
4.  Automatically alternating among light sources.
5.  No warm-up time or flickering which insures quick and reliable color judgment
6.  Economic power consumption and low heat generation for high light efficiency

           4 Lights

     5 Lights

     6 Lights

To alter the specification or modify the appearance without notice right is reserved

The perspiration tester is to determine color fastness to water, perspiration fastness in textiles

Standards:
Perspiration : AATCC 15 , EN ISO 1 05 E04 , DIN 54020 , JIS L0848 , BS 1006 E04 Water : AATC C 107, EN ISO 105 E01 , DIN 54006 , DIN54005 , JIS L 0846 , BS 10 06 E01

Sea water : AATCC 106 , EN ISO 105 E02 , DIN 54007 , JIS L0847 , BS 1006 E02 Application :

It is to deter mine color fastness test t o water, sea water, perspiration fastness in textiles and sublimation during storage. Perspiration tester consists of a stainless steel frame with 21 acrylic separator plates to hold 20 samples. An electric precise oven is required.

Test Procedure:

Treat the composite sample with synthetic perspiration, sea water or water. Place the perspiration tester with 20 samples which held between plates under a given pressure by standard loading weight into an oven for a requested time at a requested temperature.

Compare the degree of fading and pollution of attached white cloth with gray scale, and appraise the perspiration color fastness

Technical Parameter:

AATCC Count Weight: 3.63kg (8LB)

ISO Count Weight: 4.08 kg (9LB)

Laminate w eight: 0.90kg (2LB)

AATCC acrylic separator plates: (22 Pcs)

ISO acrylic separator plates: (21 Pcs)

Weight: 8 K g

Dimensions: 420mm*15 0mm*300 m m(LxWxH)

Used in a variety of textiles, non- woven fabric, leather and other materials, while force ( flexible diaphragm law ) in latitude and longitude and in all directions , expansion force and dilation of the performance measurement .

Integrated safety shied
Provided with a touch screen readout of pressure, time of burst, height of burst

Big touch screen operation, also can use PC operation.
High quality and renewable rubber diaphragms, manual griping device, and forward reverse and neutral drive system
High quality AC servo motor driven

Related standards : ASTM D3786, ISO 13938.1, BS 3424 (PT. 6), ISO 3033-B, EN 12332-2

Features:
Hydraulic pressure to 6000Kpa
Quick change bells
Diaphragm correction
Automatic flow rate adjustment
Software analysis for full results
Distension measurement up to 70mm

Technical Parameters :
Capacity 0~6MPa (6000Kpa)
Test Speed Adjustable, 20-800ml/min
Bursting strength accuracy ±0.5%FS
Hydraulic fluid glycerin with concentration 85%

Jigger Dyeing Machine is suitable to test the dyeing of cotton and linen cloth, viscose, man-made fiber, etc., and suitable for dye material, such as direct dyes, acid dyes, basic dyes, insoluble azo dyes, and reactive dyes, etc. This apparatus can achieve bleaching and dyeing with low-liquor ratio, simulates as nearly as possible the mechanism of production jigs.

Jigger Dyeing Machine is specially designed to satisfy the requirements of testing dye formula before quantity production of dyeing and finishing enterprise. This apparatus simulates as nearly as possible the mechanism of production jigs’ requirements of speed, temperature, pre-tension, etc. of real production process. Compared with production machine, this Laboratory Jig Dyeing Machine’s size is smaller, consumes small quantity of dye, and with short testing process, so operator is easier to change dye formula, and finds suitable dye formula in a short time. Therefore this machine is well welcomed by many dyeing and finishing enterprise

Manual Operation Mode Interface

 Technical Parameter:

 Control Mode: Touch Screen+ PLC

 Effective Roller Width: ≤500mm

 Roller Diameter:  F 57mm- F 200mm

 Cloth speed :0.5-8m/min +/- 0.001 m/min

 Temperature Range and accuracy: Room Temperature -98℃+/- 2℃

 Temperature Ratio: 1-3 ℃

 Tension: 0-18kgs

Material tension control mode: the difference speed between A and B roller.

 Cooling: automatic water cold system

 Power: AC 380V, 50Hz