Fabric Wettability Tester
Fabric Wettability Tester applies to determine the wettability of woven, knitted or non-woven fabrics..
A funnel is positioned above the penetrating plate and a preset quantity of salt water solution is delivered to the fabric, simultaneously starting the digital timer, which connected to the “North-South” contacts. The timer stops automatically when all solution has been passed through the fabrics, providing data on permeability to evaluate fabrics and finishes.
Standard: ISO 9073-8, FZ/T60017.
Technical Parameter & Accessories:
1. The funnel flow velocity with electromagnetic valve:
2. The distance between funnel mouth and specimen: adjustable
3. The base material: organic glass;
4. Plate size: 100 mm * 100 mm * 25 mm;
5. Rubbing Head: Roundness:φ16mm
6. Penetration plate
7. Measuring Cup
8. Timer: 0-99.99s
9. The timer accuracy: 0.01 s;
10. Power supply: AC220V+/-10%
11. Size: 530 mm * 250 mm * 250 mm;
12. Weight: 15 kg
$1,812.00
Related Products
This Button Pull Snap Tester is the unique safety test instrument that provides a means to accurately measure how safe accessories are attached in a product. It is also used to compare a variety of accessories from different vendors in the process from product design to production. It is a simple but effective design mainly consisting of a high precision gauge, a sturdy stand and special grips/clamps. It requires very little train. A sample required by standards & regulations is to be fixed horizontally (constant force is applied to secure the sample) so that snap or other accessories attached in fabric can be clamped into.
It can be used in buttons, zippers, toys testing for many brands like NEXT, M&H, GAP, M&S, NIKE, LIVIS, and other famous brands necessary attachments are available.
.
Standards:16 CFR 1500.51~53、ASTM F963、EN71-Part 1、M&S P115A., H&M, NEXT etc
Standard package 1-16:
1- Imada Force Gauge FB-30K
2- Upper Stud Grip
3- Upper Grasp Button Grip (Upper Tip-Top Grip)
4- Lower Fabric Clamp
5- Low Grasp Button Accessories Kit
6- Three Pronged Clamp
7- Calibration Weight 15LB
8- Mechanical Stand for Imada Force Gauge
9- Upper Long Nose Vise Grip
10- Upper Universal Grip
11- Button snap attachment
12- Extension rod for lower clamp
13- Allen key for handling fitting (2mm)
14- Protective goggles
15- Supper rubber O rings 5 pcs.
16- Operation Manual
Used in a variety of textiles, non- woven fabric, leather and other materials, while force ( flexible diaphragm law ) in latitude and longitude and in all directions , expansion force and dilation of the performance measurement .
Integrated safety shied
Provided with a touch screen readout of pressure, time of burst, height of burst
Big touch screen operation, also can use PC operation.
High quality and renewable rubber diaphragms, manual griping device, and forward reverse and neutral drive system
High quality AC servo motor driven
Related standards : ASTM D3786, ISO 13938.1, BS 3424 (PT. 6), ISO 3033-B, EN 12332-2
Features:
Hydraulic pressure to 6000Kpa
Quick change bells
Diaphragm correction
Automatic flow rate adjustment
Software analysis for full results
Distension measurement up to 70mm
Technical Parameters :
Capacity 0~6MPa (6000Kpa)
Test Speed Adjustable, 20-800ml/min
Bursting strength accuracy ±0.5%FS
Hydraulic fluid glycerin with concentration 85%
Use: Suitable for high temperature (or normal temperature) dyeing, washing, dry-cleaning and samples colorfastness test.
Applied Range:
Suitable f or all kinds of yarn and fabric dyeing experiments, especially for N, N/C, T/N and other kinds of knitted and woven cloth, spandex lake, have better levelness and reproducible.
Features:
With internal heating type silicon carbide heat conduction, to avoid the old infrared machine with heat conduction oil as heat carrier inflammable and explosive fatal flaw.
Use stainless steel infrared heater, compared with the external heating infrared glass lamp life long, long time.
Without glycerin, lampblack pollution; Due to the adopted high-power air cooling system, and therefore there is no loss of cooling water;
Heating power is only 1/3 of the traditional oil heat infrared machine, and heat preservation, constant temperature effect is good, save water, electricity, etc Line costs.
Programmable LCD computer installations, a variety of expressions, real time monitor the working state of the curve of the test process and relevant operation.
Adopts frequency conversion control, adjustable rotary speed, better co operate with the scene of the production process works.
To adapt to different kinds of fabric and dyeing processing, the method of general configuration routine for 24 cups of 300ml.
Technical Parameter:
- Number of steel cup: 24
- Dyed cup material: stainless steel 316 l a stretch forming.
- Cup specification: 300 ml.
- Rotational speed: 0-45 rpm
- Operating temperature : room temperature to 14 0 ℃.
- Temperature control precision:±2℃
- Heating rate: 0.5 – 33 ℃ / min (full cup slightly lower, about 3 ℃ / min)
- Cooling: forced air cooling.
- Heat conduction medium: carborundum.
10 . Power specifications: 110V, 60Hz, Single phase
11 . Dimension : 750mm * 7 75mm * 775 mm (long * deep * high).
12 . Machine weight: about 195 kg.
Used for testing the fastness to dry or wet rubbing and the fastness to brushing of all kinds of colored textiles, motorized operation, auto stop when counts reach pre-set counts..
Features:
- Adopt linear slide, running more smooth
- Rubbing head always keep horizontal, no matter thickness of specimen,
no adjust position of rubbing head, easier operation.
- Adopt block pressing method, better clamping specimen.
Standards: ISO105-X12, D02, Bs1006 D02, DIN54021, IWS Tm165, JIS K6328. AATCC8/165
Technical Parameter :
Testing times | 1-99999 |
Rubbing travel | 104±3mm |
Rubbing speed | 60r/min |
Rubbing pressure | 9N |
Rubbing head | Roundness :ф 16mm |
External Dimensions | 600mm×225mm×270mm |
Weight | 12kgs |
Power | AC 220V, 50Hz |
APPLICATIONS:
Adjust to the same pick up with bulk production and provide precise pressed dyeing or resin prescription To check the color shade change and to further avoid it happening during resin finishing or heat setting processes after dyeing. Application tests of water repellent, flame retarding and other coating tests special features.
SPECIAL FEATURES:
- Constant nip pressure can be kept due to pneumatic design
- The left or right side pressure of padding roller can be independently adjustable to the required one.
- Easy to operate once you set the required padding nip pressure no other re‐adjustment will be needed.
- Safety devices include a fabric feeder, safety rod, emergency button and a knee pedal to make sure the safe operations at every test.
SPECIFICATION:
- One pair of padding rollers made of N, B, R, rubber material of 70°shore hardness
- Rubber roller diameter 125mmφlength 450 mm
- Driven by 1/4 hp motor with speed reducer (voltage & hertz to be specified)
- Revolving speed is 0‐10m/min (variable frequency speed control)
- Two pressure gauges 0~5kg /cm2
- Two pressure regulating valves (precision 0.1 kg /cm2)
- Air compressor is excluded.
Technical Parameter:
Model | P‐A Vertical type | P‐B Horizontal Type |
Dimensions | 85×56×140CM | 85×56×140CM |
Power | 380‐400 VAC, 50Hz | 380‐400 VAC, 50Hz |
Net Weight: | ~120 KGS | ~120 KGS |
Shipment weight: | ~210 KGS | ~190 KGS |
Shipmen Dimension: | ~100*75*145CM | ~95*75*120CM |
This machine is used to determine not only the fabric hydrostatic pressure resistance, but also the hydrostatic pressure proof performance of the coating materials.
Standards: ISO-811, AATCC 127, BS EN20811, ISO 1420
Features:
Microcomputer control, English LCD menu, four built-in test methods .
The built-in tank design, creative balance system of water pressure rate, rising speed stability and accuracy.
Clamp made of stainless steel, equip LED light to view specimen clearly
Testing Methods:
Turbocharged Constant pressure time
(It means at the constant pressure, how long can appear the first water drop on the specimen)
Constant pressure regularly (It means at the constant pressure and specify time,
if can appear water drop on the specimen).
Leakage water method
Technical Parameter:
Testing range: 0.5kpa-200kpa
Accuracy: 0.2%F.S
Elevation Speed: 1kpa-30kpa
Clamp Area: 100cm2
Testing Units:(pa mmHg cmH2O)
Power: AC 220V 50Hz
Dimension: 550x400x500mm
Weight: 55kg
Application:
Digital Elmendorf Tear Tester, A computer controlled falling-pendulum instrument, to determine the ballistic tearing strength of textiles, plastics, paper or board.
It enables rapid determination of the dynamic resistance of materials designed to be subjected to strong shearing loads (e.g. fabrics) or liable to be damaged by sharp or heavy objects (e.g. paper bags). Subsequently, the test was naturally adopted for all materials in the form of sheet or films, cardboards, cloth, knitted fabrics, plastic films, aluminum foil, non-woven fabrics, complex flexible packaging etc. But does not apply to sparse fabric or stretch materials which tearing direction might be shift in test.
Procedure: The test is carried out on a specimen composed of one or more sheets of standard dimensions 100 x 63 mm, a crack in length of 20 mm of specimen is notched automatically, a usually with a distance of 43mm (1.7 in) remaining to be torn after initiating the tear. The energy of a pendulum of suitable weight is used to completely tear the specimen. The difference in the angle from the vertical of the center of gravity of the pendulum between the downswing and upswing is a measure of the energy absorbed in tearing the sample
This angular movement is measured with a digital encoder and is immediately converted to the mean tearing force for a single sheet by the microprocessor and software incorporated in the apparatus.
Standard: BS 4253, ASTM D1424/5734 , DIN 53862, BS EN ISO 13937, ISO1974/9290.
Features:
Works in accordance with all known test standards. RS-232 data output, equipped Tearing Test software Auto specimen notching
Repeatable, pneumatic specimen gripping system guarantees sufficient clamping pressure to avoid all slipping phenomena,
thus ensuring perfect reproducibility of the experimental conditions.
Automatic compensation for friction and leveling errors, no slave pointer, therefore no friction, alignment and maintenance problems.
Unit: N, gf, cN, Cp can be selected.
Specifications:
- Testing range: A hammer: 0~16N B hammer: 0~32N C hammer: 0~64N D hammer: 0~128N
- Testing accuracy:≤±0.2%F·S
- Tearing length:43mm
- Length of automatic cut:20±0.1mm
- Sample size:100×63mm
- Type of sample clamping: pneumatic clamping
- Power source:AC220V50Hz
- External dimension:520×380×700mm
- Weight: 68kg
Packing list of
No. | Name | Qty | Remark |
1 | Tearing Tester | 1 Set | |
2 | Cutting Templates | 1 Pc | For preparing Specimen |
3 | Cutting Knifes | 1 Pc | For preparing Specimen |
4 | Weights | 1 Set | |
5 | Software | 1 | |
6 | Air Compressor | 1 | Optional |
The scope of application:
Used in a variety of textiles, non‐ woven fabric, leather and other materials, while force (flexible diaphragm law ) in latitude and longitude and in all directions , expansion force and dilation of the performance measurement .
Related standards: ASTM D3786, ISO 13938.1
Instrument characteristics:
- Use 16bit Industry‐grade MCU (ATMEL, US A), more excellent anti ‐jamming, more excellent stability
- Print t he test reports by built‐in thermal printer
- Dial pressure mete r to show pressure applied to specimen
- Proveded with a touch screen readout of pressure, time of burst,
- height of burst and the peak hold facility
- High quality and renewable rubber diaphragms, manual griping device, and forward reverse and neutralal drive sys tem.
Technical Parameters:
Test Area | φ30 .5±0.05mm (7.3cm2) | ||
Test Area | φ79 .8mm±0.05 mm (50cm2 ) | ||
Capacity | 0~6MPa (6000K pa) | ||
Fluid rate | Adjustable | ||
Bursting strength accuracy | ±0. 5%FS | ||
Hydraulic fluid | glycerin with concentration 85% | ||
Power supply | Ac220V 50Hz/110V, 60Hz | ||
Instrument dimension | 560 ×400×680mm(L×W×H) | ||
weight | 70kg | ||
Packing list of XHF‐16 | |||
No. | Name | Quantity | Remark |
1 | Bursting Strength Tester | 1 | Main body |
2 | Diaphragm | 5 | |
3 | Specimen holders | 1 set | φ30.5± 0.05mm |
4 | Specimen holders | 1 set | φ79.8mm±0.05mm |
4 | Spanner | 1 | Disassemble Holders |
Manual Crock meter is used for testing the fastness to dry or wet rubbing
and the fastness to brushing of all kinds of colored textiles, digital display.
Standards: ISO105-X12, D02, Bs1006 D02, DIN54021, IWS Tm165, JIS K6328. AATCC8/165
Technical Parameter :
Testing times 1-99999
Rubbing travel 104±3mm
Rubbing speed Manual
Rubbing pressure 9N
Rubbing head Roundness :ф 16mm
External Dimensions 620*160* 230mm
Optional Accessories:
AATCC crocking clothes 1Box (1000Pcs)
ISO Grey Scale
AATCC Grey Scale.
The GSM Cutter is for sampling the materials of fabrics and non-fabrics.
The handle is made of aluminum alloy, no broken, Star structure is designed according to the
human touch.
Adopt the high-carbon blade (white); press plate is made of aluminum alloy, not rust, Tight press.
here are 16 stainless steel cross screws on the press plate , make it firm and not slide ,
no rust .
The cutter’s face adopt international advanced T-shaped anti-slip groove structure; minimize the stress in the tangent direction during the cutting and reduce hand fatigue, also ensure that the sample is flat and not slip, a precise cutting .
Adopt the thickness adjustable structure to protect the blade and pad.
It use cork pad, not rubber pad.
Standard: ISO3801, BS2471, ASTM D3776, IWS TM13
Technical Parameter:
Sample area: 100cm2
Max. Cutting thickness: 5mm
External Dimensions: 156×112
Accessories: 2 cutting pads included
4 Extra cutting Blades included (Made in UK)
First spectrophotometer in China
- Obtained China Metrology Accreditation Certificate Large data storage space Large TFT display screen
- Modern and fashionable design based on human engineering
- Easy to use operation modes and compact operation interface
- Pre-locating panel design for easy instrument calibration
- Uses LED light source; high capacity rechargeable lithium-ion battery
- Can measure both SCI (specular included) and SCE (specular excluded) at the same time
- Includes PC software to manage data
- Can connect to mini-printers for printing
High performance-price ratio among international similar products
As China’s first spectrophotometer, integrates multiple innovative technical characteristic, and extends the boundary of on-site color quality control during production;
It can be applied to laboratories, factories and on-site operations, and can achieve the best color management across all application fields’ quality control
Allows medium and small companies to obtain high performance color management system with relatively low price
The software contains all necessary color equations, standard light sources, and a large number of standards for specific industries and applications
Operation system supports both English and Chinese interfaces, and we offer to design the interface in other languages based on the need of our customers.
Professional design, powerful instrument functions
Professional horizontal design and it does not have any moving parts, which avoids the shaking of the instrument during measurement process.
This makes the measurement more accurate
PC software for easy measurement data management
Can measure both SCI and SCE at the same time
Large data storage space: can store up to 100 sets of standard samples, with up to 200 measurement records for each standard sample
Adding powder test accessories, easily measure the color of the Powder, granules and other samples
Random Tumble Pilling Tester. To determine the pilling and fuzzing characteristics of textile, fabrics. Stainless steel impellers rotate within individually lit aluminum chambers constantly tumbling test fabrics against cork liners for a pre-determined time controlled by a timer andaudible alarm. With 2 or 4 test chambers. Laboratory standard compressed air supply required.
XHF-03C-1 Randum Tumble Pilling Tester-2 test chambers
XHF-03C-2 Randum Tumble Pilling Tester-4 test chambers
Standards: ASTM D3512, DIN 53867, JIS L1076
Technical Parameter :
Rotating speed: 1200rpm
Size of Testing Cylinder: Diameter146mm, Depth:152mm
Sample Dimension: 105mmx105mm
Dimensions: 400x390x515mm (LxWxH), 420x55x570mm(LxWxH)
Weight: 31kg, 65kg
Original Accessories: SDL Cork Liners 50Pcs/Pack
Cotton Silver 1 Yarn
Photographic standards card 5Pcs/Set