Hydrostatic Head Pressure Tester

To determine the color fastness of textiles to dry or wet rubbing.

A pinned acrylic sample holder ensures rapid sample mounting and repeatability of results. Fitted with a pre‐determined electronic counter for strokes up to 9999,

Standards: ISO105‐X12, D02, Bs1006 D02, DIN54021, IWS Tm165, JIS K6328.

Technical Parameter:
Testing Time: 1‐99999
Rubber Travel: 104/100mm (Can be adjust)+/- 3mm
Rubbing Speed: 60r/min
Rubbing pressure: 9N
Rubbing Head: Roundness:φ16mm
Dimension: 600mm x 225mm x 270mm
Weight: 11kgs
Power Source: AC 220V, 50Hz

Accessories:
Rubbing clothing 1 (box)
Sand paper 2 (pcs)
Rings 2 (pcs)

Fabric Thickness tester is applicable of measuring the thickness o f tissue pap er, woven, knitted fabric s, non- woven and o ther uniform materials. It is designed according to

Standards: ISO5084 ,FZ/T6000 4, ISO9073, ISO 98 63….etc.

Technical Para meter :

 Thickness measuring range : 0-25mm

Min. graduation value : 0.001 mm

Press foot diameter: 11.28mm , 50.48 mm, 56.42 mm, 112.84 mm

Press er foot area : 100, 2000, 2500, 1000 0(mm2)

Weighing poise :   5cN*1, 10cN*2, 50cN*2, 100cN*1,4 00cN*1,1000 cN*1 (combine)

Press time: 10s,30s

Test speed: when press time is 10s, about 2.1 times/minutes; when press time is

30s, 1.2 times/minutes.

Weight : 30kg

External Dimensions : 210x450x400mm

Power source : A C220V±10% 50Hz

Xenon light fastness tester is mainly used for test of the color fastness to light and weather fastness of all kinds of nonferrous, coloring textile; it can also be used for testing the color fastness and ageing of painting, pigment, paint, rubber, plastic, paper and other materials. It has high intelligence, high measurement and control precision, stable performance; and it also has touch screen which is graphic mark displaying, friendly interface, it also easy to operate.

Standard: ISO105-B02/B04/B06 AATCC 16 JIS L0843 ISO 4892-2

Feature:

1. Using 3300W long arc xenon lamp, truly simulate daylight spectrum;
2. Adopt high transmittance filter combination, using 95% of the transmittance of the filter and the filter

    cylinder, to achieve the same irradiance optical requirements of low power consumption,

    makes the instrument more energy saving and environmental protection

4. Automatic compensating system (PATENT) control the Xenon Lamp Power.
5. Large touch screen, indicate the condition of chamber at real-time, be able to presetting irradiance,

     temperature (BPT or BST, chamber), humidity  and plot dynamic curve of them.

5. The operator simply selects the required test module and test standards;
6. 6.  English user interface, diagram indicate condition of chamber, easy to use.
7. 7.PLC control, powerful program and storage property, save the parameters when interrupt of power supply.
8. Custom program capability and storage for additional user-defined tests.
9. 9.Built-in diagnostics and warnings, automatic prompt when lamp or optical filters require changing.
10. 1 Multi-position sensor to supervise working condition, temperature, humidity, fan, xenon lamp, and door to chamber, it makes device work properly and reliably.
11. 1Adopt (PATENT) military transmission technology in order to prevent electronic parts aging because of wireless transmission.
12. A test can be 1000 hours of continuous operation of quality assurance.

Technical Parameter:

 Light source: 3300W air-cooled long-arc xenon lamp Life of lamp: 1000-1500 hours

 Chamber Temperature range: 25 ~ 50 C, accuracy: +/- 2 C

 Blackboard  temperature   range: 30-80 C   Accuracy: +/- 3 C

 Humidity range: 10 ~ 95% RH, accuracy: +/- 5%

 Irradiance: 0.60 ~ 2.01W/m2/420nm (340nm, 300~400nm, 300~800nm is offered on request), Digital set, automatic closed-loop compensation

Control Accuracy of Irradiance: +/- 0.02W/m2/420nm

 Photoperiod: ≤1000h

 Spray cycle: ≤1000h

 Rotation speed of sample holder: revolution 5r/min

 Dimension: 1200 x 800 x 1720mm

 Weight: 213kg

The perspiration tester is to determine color fastness to water, perspiration fastness in textiles

Standards:
Perspiration : AATCC 15 , EN ISO 1 05 E04 , DIN 54020 , JIS L0848 , BS 1006 E04 Water : AATC C 107, EN ISO 105 E01 , DIN 54006 , DIN54005 , JIS L 0846 , BS 10 06 E01

Sea water : AATCC 106 , EN ISO 105 E02 , DIN 54007 , JIS L0847 , BS 1006 E02 Application :

It is to deter mine color fastness test t o water, sea water, perspiration fastness in textiles and sublimation during storage. Perspiration tester consists of a stainless steel frame with 21 acrylic separator plates to hold 20 samples. An electric precise oven is required.

Test Procedure:

Treat the composite sample with synthetic perspiration, sea water or water. Place the perspiration tester with 20 samples which held between plates under a given pressure by standard loading weight into an oven for a requested time at a requested temperature.

Compare the degree of fading and pollution of attached white cloth with gray scale, and appraise the perspiration color fastness

Technical Parameter:

AATCC Count Weight: 3.63kg (8LB)

ISO Count Weight: 4.08 kg (9LB)

Laminate w eight: 0.90kg (2LB)

AATCC acrylic separator plates: (22 Pcs)

ISO acrylic separator plates: (21 Pcs)

Weight: 8 K g

Dimensions: 420mm*15 0mm*300 m m(LxWxH)

This Tabletop spectrophotometer  has the advantage of excellent inter-instrument agreement, high accuracy and good replicability.

It could meet your requirement for both color quality control and color matching very easily.

Brief Introduction

1. Transmission D/0 Structure and Reflection D/8 Structure
2. Double Optical Paths Spectral Analysis Technology.

It could get the measurement sample data and internal environment data at the same time to make sure the testing accuracy and

stability for long time running.

3. Compatible with SCI/SCE Measurement.

Adopt D/8 illuminant condition recommended by the CIE to meet the color testing requirement for different industries. It could measure with SCI and SCE to see the color data change more clearly.

4. Four Testing CalibersIt is easy to adjust the testing calibers.The largest caliber diameter reaches 25.4mm. It could test the sample with different sizes.

This is not only suitable for testing the color of opacity sample, but also suitable for transparent or translucent sample’s transmittance and turbidity.

5. Large screen display and Stand-alone operation.It could finish the sample test without connecting with the computer. Large screen display to make sure customer could see the testing result directly and clearly and it will be more convenient to set the instrument status. The color quality management software and color match software are optional according to customer’s need.

6. Unique Calibration Board Design.Fix the calibration board on the testing caliber to make sure the accuracy of the white calibration and guarantee the high accuracy for measurement.
7. Flexible Test Fixture.It could fix the sample with different size and thickness on the testing port tightly in case of stray light entering to affect the testing accuracy.

Technical Data:

Application:

Digital Elmendorf Tear Tester, A computer controlled falling-pendulum instrument, to determine the ballistic tearing strength of textiles, plastics, paper or board.

It enables rapid determination of the dynamic resistance of materials designed to be subjected to strong shearing loads (e.g. fabrics) or liable to be damaged by sharp or heavy objects (e.g. paper bags). Subsequently, the test was naturally adopted for all materials in the form of sheet or films, cardboards, cloth, knitted fabrics, plastic films, aluminum foil, non-woven fabrics, complex flexible packaging etc. But does not apply to sparse fabric or stretch materials which tearing direction might be shift in test.

Procedure: The test is carried out on a specimen composed of one or more sheets of standard dimensions 100 x 63 mm, a crack in length of 20 mm of specimen is notched automatically, a usually with a distance of 43mm (1.7 in) remaining to be torn after initiating the tear. The energy of a pendulum of suitable weight is used to completely tear the specimen. The difference in the angle from the vertical of the center of gravity of the pendulum between the downswing and upswing is a measure of the energy absorbed in tearing the sample

This angular movement is measured with a digital encoder and is immediately converted to the mean tearing force for a single sheet by the microprocessor and software incorporated in the apparatus.

Standard: BS 4253, ASTM D1424/5734 , DIN 53862, BS EN ISO 13937, ISO1974/9290.

     Features:

     Works in accordance with all known test standards. RS-232 data output, equipped Tearing Test software Auto specimen notching

    Repeatable, pneumatic specimen gripping system guarantees sufficient clamping pressure to avoid all slipping phenomena,

    thus ensuring perfect reproducibility of the experimental conditions.

    Automatic compensation for friction and leveling errors, no slave pointer, therefore no friction, alignment and maintenance problems.

    Unit: N, gf, cN, Cp can be selected.

Specifications:

1. Testing range: A hammer: 0～16N B hammer: 0～32N C hammer: 0～64N D hammer: 0～128N
2. Testing accuracy:≤±0.2％F·S
3. Tearing length:43mm
4. Length of automatic cut:20±0.1mm
5. Sample size:100×63mm
6. Type of sample clamping: pneumatic clamping
7. Power source:AC220V50Hz
8. External dimension:520×380×700mm
9. Weight: 68kg

Packing list of