Lab Coater Electronic & Mechanical
The Lab Coater is the optimum combination of dryer and laboratory coating table. Various kinds of material samples are coated in the same run by the coating device and heat-treated in the dryer.
The coating is applied either by a floating, roller or rubber blanket knife. Multiple coatings which do not require reloading are also possible.
Technical Parameter:
Max. Coating area : 300x400mm
Coating thickness: 0-5mm,
Resolution ratio: 0.01mm
Electric coating, coating speed: 0-4m/min, double direction adjust speed (Electronic model has this function)
Removable pin frame, the pin frame can be put into the oven with the textile when coated.
$0.00
Related Products
Automatic Fabric Air Permeability Tester is used to test the air permeability of various woven fabrics, knitted fabrics, non-woven fabrics, industrial filter materials etc
Standards:
ASTM D737, ASTM D3574, AFNORG07-111, BS5636, DIN53,887,EDANA140.1, EN IS07,231, ENISO9,237, JIS L1096-A, TAPPI T251 and so on.
S Model: Manual replacement of the Orifice plate.
A Model: Automatic replacement of the Orifice plate.
- More excellent anti-jamming, more excellent stability, more rapid data transference speed.
- Adopt microcomputer control system, branded high accuracy pressure sensor, digital feedback and adjust air volume.
- Automatic orifice plate replacement, no manual replacement .
4.Automatic orifice plate replacement, no manual replacement
- Automatic follow, measure and display pressure difference of each point with high stability and repeatability.
- All plates have been calibrated by-point in full testing range to let test data more accuracy.
- All test data is displayed by large high-definition large color touch screen displayer, no need to calculate test result by hands.
- Automatic converse air permeability rate and air permeability volume to improve test efficiency.
- Large touch screen displayer and controller.
- Adopt micro-computer control, insure the test data accuracy and test data can be saved and processed automatically.
- Special designed sample holder accomplish test in box and ensure the yarn without slip.
- Equipped with the inner printer, test report can be printed anywhere.
- Testing procedure can be set conveniently by the inner control panel.
- 14 With the function of saving data when power-down.
- Professional software support to output results to PC.
Technical Parameters:
- Working pattern: high precision imported pressure sensor, touch screen control, printing and testing report
- Pressure volume : 50-500Pa
- Specimen thickness: ≤12mm
4 .Measuring accuracy : ≤±2%
- Test area/diameter: 20 cm2, 38 cm2 Optional : 50 cm2,100cm2, 5 cm2, φ50mm
- Units: Total 8 Units to can be freely switched: mm/s, L/m2/s, L/dm2/min, cm3/cm2/s, ft3/ft2/min, m3/m2/min, m3/m2/h, dm3/s
- Orifice plate: 8 Pcs ( Φ0.5mm, Φ1.0mm, Φ1.5mm, Φ2.5mm, Φ4.5mm, Φ8.0mm, Φ14.5mm, Φ26mm)
- Calibration : unique calibration board
- Permeability ratio range: 0.2-11000mm/s (L/m2.S)
- External Dimensions: 700x1000x1000mm
- Gross Weight: 100kg
- Power source: 220V±10% 50HZ
To alter the specification or modify the appearance without notice right is reserved
Used in a variety of textiles, non- woven fabric, leather and other materials, while force ( flexible diaphragm law ) in latitude and longitude and in all directions , expansion force and dilation of the performance measurement .
Integrated safety shied
Provided with a touch screen readout of pressure, time of burst, height of burst
Big touch screen operation, also can use PC operation.
High quality and renewable rubber diaphragms, manual griping device, and forward reverse and neutral drive system
High quality AC servo motor driven
Related standards : ASTM D3786, ISO 13938.1, BS 3424 (PT. 6), ISO 3033-B, EN 12332-2
Features:
Hydraulic pressure to 6000Kpa
Quick change bells
Diaphragm correction
Automatic flow rate adjustment
Software analysis for full results
Distension measurement up to 70mm
Technical Parameters :
Capacity 0~6MPa (6000Kpa)
Test Speed Adjustable, 20-800ml/min
Bursting strength accuracy ±0.5%FS
Hydraulic fluid glycerin with concentration 85%
It is used for the test for drying process and the drying procedures needed by other textiles ,which are prescribed in the standard textiles.
Standard: BS EN ISO 6330-2012, AATCC 135, NEXT standards
Features:
Quality steel with hot coatings as outer shell, and drum is made of stainless steel.
The new impact design ensures silent running and safe operation.
Micro computer control drying temperature, automatic cooling before drying finished.
Digital electricity, hardware control, strong anti-interference ability.
With door open protection.
Drying time can be random selected.
Max loading capacity can reach 15kgs (rated 10kgs).
Technical Parameter:
Type: front-loading, horizontal drum
Rated specimen drying: 10kg
Drying time: room temperature-80℃
Drum diameter: 695mm
Drum depth: 435mm
Drum volume: 165L
Drum speed: 50 r/min
Lifting vanes number: 3 pcs, 120 ° between each one
Power: 220V, 50Hz, 5.5KW
Dimension: 785×960×1365mm
Weight: 100kgs
The scope of application:
Used in a variety of textiles, non‐ woven fabric, leather and other materials, while force (flexible diaphragm law ) in latitude and longitude and in all directions , expansion force and dilation of the performance measurement .
Related standards: ASTM D3786, ISO 13938.1
Instrument characteristics:
- Use 16bit Industry‐grade MCU (ATMEL, US A), more excellent anti ‐jamming, more excellent stability
- Print t he test reports by built‐in thermal printer
- Dial pressure mete r to show pressure applied to specimen
- Proveded with a touch screen readout of pressure, time of burst,
- height of burst and the peak hold facility
- High quality and renewable rubber diaphragms, manual griping device, and forward reverse and neutralal drive sys tem.
Technical Parameters:
Test Area | φ30 .5±0.05mm (7.3cm2) | ||
Test Area | φ79 .8mm±0.05 mm (50cm2 ) | ||
Capacity | 0~6MPa (6000K pa) | ||
Fluid rate | Adjustable | ||
Bursting strength accuracy | ±0. 5%FS | ||
Hydraulic fluid | glycerin with concentration 85% | ||
Power supply | Ac220V 50Hz/110V, 60Hz | ||
Instrument dimension | 560 ×400×680mm(L×W×H) | ||
weight | 70kg | ||
Packing list of XHF‐16 | |||
No. | Name | Quantity | Remark |
1 | Bursting Strength Tester | 1 | Main body |
2 | Diaphragm | 5 | |
3 | Specimen holders | 1 set | φ30.5± 0.05mm |
4 | Specimen holders | 1 set | φ79.8mm±0.05mm |
4 | Spanner | 1 | Disassemble Holders |
Use: Suitable for high temperature (or normal temperature) dyeing, washing, dry-cleaning and samples colorfastness test.
Applied Range:
Suitable f or all kinds of yarn and fabric dyeing experiments, especially for N, N/C, T/N and other kinds of knitted and woven cloth, spandex lake, have better levelness and reproducible.
Features:
With internal heating type silicon carbide heat conduction, to avoid the old infrared machine with heat conduction oil as heat carrier inflammable and explosive fatal flaw.
Use stainless steel infrared heater, compared with the external heating infrared glass lamp life long, long time.
Without glycerin, lampblack pollution; Due to the adopted high-power air cooling system, and therefore there is no loss of cooling water;
Heating power is only 1/3 of the traditional oil heat infrared machine, and heat preservation, constant temperature effect is good, save water, electricity, etc Line costs.
Programmable LCD computer installations, a variety of expressions, real time monitor the working state of the curve of the test process and relevant operation.
Adopts frequency conversion control, adjustable rotary speed, better co operate with the scene of the production process works.
To adapt to different kinds of fabric and dyeing processing, the method of general configuration routine for 24 cups of 300ml.
Technical Parameter:
- Number of steel cup: 24
- Dyed cup material: stainless steel 316 l a stretch forming.
- Cup specification: 300 ml.
- Rotational speed: 0-45 rpm
- Operating temperature : room temperature to 14 0 ℃.
- Temperature control precision:±2℃
- Heating rate: 0.5 – 33 ℃ / min (full cup slightly lower, about 3 ℃ / min)
- Cooling: forced air cooling.
- Heat conduction medium: carborundum.
10 . Power specifications: 110V, 60Hz, Single phase
11 . Dimension : 750mm * 7 75mm * 775 mm (long * deep * high).
12 . Machine weight: about 195 kg.
The Vertical Fabric flammability tester is used for testing trend of after flame, flame retardant and carbonization of camping tentage.. It is automatically determine the flammability resistance to a vertical flame of camping tentage.
Characteristics:
1 . Use PLC touch screen control
- Electric automatically burner, light clocking set freely from 0-999.9s.
- Burning chamber is stainless steel.
- Flame height can be adjusted
- Automatically burner orientation
Standards: CPAI 84 Flammability Test Method Wall and Top Material
Technical Parameters : | ||
Vent Holes | Top 16 pcs, Two sides, each 6 pcs, diameter: 13mm | |
Time range and accuracy | 0.0-999.9S, resolution 0.1S (adjustable) | |
Burner | Inner diameter: 5mm, barrel: 75mm | |
Distance between burner and | 20mm | |
specimen | ||
Flame Height | 38mm (adjustable) | |
Ignition time in test | 12S (adjustable) | |
Specimen Size | 300x70mm | |
Inner dimension of clamp | 360x50mm | |
Load weights | 50g, 100g, 200g, 350g | |
Dimensions | 600 x 400x850mm | |
Weight | 35kg | |
Power source | 110V/220V, 50Hz/60Hz | |
Application:
It is used for color matching of any product under different lights, it is wide ly applied in Textile, toy, printing, plastic, rubber, chemical, ink, ceramic,
leather, , paints, chemicals, footwear, leather, metal, food, cosmetics multi-industry field.
Meets to m ajor international standards for visual color evaluation including:
ASTM D17 29, ISO3664, DIN, ANSI and BSI.
Tube length: 12 00mm
Easy to operate by using individual switches for each light source.
Elapsed time meter for tracking optimal l amp replacement.
Automatically alternating among light sources.
No warm-up time or flickering which insures quick and reliable color judgment
Economic power consumption and low heat generation for high light efficiency
Lights:
Model | Name | Pcs | Power | Color Temperature |
Six Lights
220V, 50Hz |
D65 | 2 | 36W/Piece | 6500K |
TL84 | 2 | 36W/Piece | 4000K | |
F/A | 6 | 40W/Piece | 2700K | |
UV | 1 | 40W/Piece | 365nnm | |
CWF | 2 | 36W/Piece | 4200K | |
U30 | 2 | 36W/Piece | 3000K |
To alter the specification or modify the appearance without notice right is reserved
Rotary Crock Meter to determine the color fastness of textiles to dry and wet rubbing particularly for printer fabrics. Applies 1134g of pressure on a 16mm finger and rotates 1.125 turns clockwise then anti-clockwise. The operating handle is however turn in one direction only.
Standards: AATCC 116; ISO 105 X16
Technical Parameter:
Diameter of rubber head: Diameter of rubbing head: 16±0.1mm
Turning of vertical pole: after turning1.125 circles then reverse
Dimensions: 260×150×210mm
Weight: 5kg
Optional:
AATCC crocking clothes 1Box (1000Pcs)
AATCC grey scale
The Launderometer (washing fastness tester, called different names as (Gyrowash, Rotawash, Dynowash), to determine color fastness to washing or dry cleaning to washing fastness methods, it complies with ISO, BSI, AATCC and Marks& Spencer standards.
Feature:
Available in different sizes such as portable washing fastness tester, etc. The washing fastness tester uses stainless steel rotor to holds washpots on each of four sides and rotates at a constant 40 rpm (+/-2 rpm). Washpots are preheated in appropriate test solution, structure wholly made of very strong stainless steel.
Color touch screen display and PLC control, containers are sealed with either a Neoprene rubber gasket or optional Teflon gasket.
Small and large test vessels are interchangeable so they can be placed in every position.
This allows operators to test to both ISO (European) and AATCC (American) Standards with ease.
To offer a reliable and safe washing fastness test, Washing fastness tester equipped with water-lacking alarm, protection device when opening door, Test-finished alarm, Automatic shutdown with audible warning etc, electric drainage function is optional.
Standard: ISO105 C01-C06, M& SC4A. 5.37. P3B, IWSTM 7.115.177.193.240, 241, AATCC 2, 3, 28, 61, 62, 86, 132, 151, 190, FTMS 191-5610/5622, BS 1006, NEXT
Technical Parameter:
Rotation speed: 40+/-2/rpm
Quantity of positions: 8, 12, 16, 20 depend on customer’s request
Size of ISO washpot: 550ml 75mm dia x 125mm(3.0 in x 5.0in)
Size of AATCC washpot: 1200ml 90mm diax 200mm(3.5 in x 8.0in)
Temperature : Max 95℃ Adjustable
Running time: Adjustable
PACKING LIST:
No. | Name | Quantity | Remark | |
1 | Washing Fastness Tester | 1 set | Main body | |
2 | 550ml Container+Vessles | 1 Set | Optional | |
3 | 1200ml Container+ Vessels | Optional | ||
4 | Stainless Steel Balls | 50 | Pcs | For each pot |
5 | Stainless Steel Discs | 1 | Pc | For each pot |
6. | Electric Drainage Function | 1 | Pc | Optional |
Introduction :
Application scope of XHF-05 Martindale Abrasion & Pilling Tester : suitable for the wear-resistance and grinding test under certain pressure of woven and wool-blend fabrics, Leather, knitted goods and non-woven fabric
Standards: ISO5470, IWS TM112/196, DIN53863/53865, BS3424/5690, BS EN 388/530, JIS L1096, ASTM D4966/4970 , ISO17079-2, ISO 12947, ISO17704, ISO 20344, ISO 17076-2, SATRA TM31 and so on.
Features of touch screen Martindale:
1.Machines with two Lissa-jous trajectory.
2.Using color touch-screen operation, PLC control, each working position can be controlled separately.
- Motor overheat protection, convenient operation.
- There is a alarm when the test is finished.
- Data can be restored after the power failure.
Technical Parameters:
Work-station number : 6 or 9 pcs
Counter display : Pre-set counter display: 0-999999
Cumulative counter display: 0-999999
Abrading table diameter : 120mm
Test pressure (abrasion test)
A: cloth specimen clamp:198g +/- 2g
B: textile specimen hammer:395g +/-2g (Equal to 9Kpa)
C: furniture deck specimen hammer:594g +/-2g (Equal to 12Kpa)
Pressure test (pilling test)
A: cloth specimen clamp:155g +/-1g
B: textile specimen hammer:260g +/-1g
Weight of Load hammer: 2385g +/-10g
Dimension: 850mm\ x 600mm x 400mm
Weight: Machine 120kgs Accessories box: 22kgs Voltage supply:220V/110V, 50HZ/60Hz
Packing list
No. | Name | Quantity | Remark |
1 | Abrasion tester | 1 | Main body |
2 | Pin Shaft | 6 or 9 | |
3 | Hammer | 1 | |
4 | Lissa-jous trace pen | 1 | |
5 | Dia 140 sample cutter | 1 | |
6 | Dia 38 sample cutter | 1 | |
7 | Dia 90 sample cutter | 1 | |
8 | Weights | 12 or 18 | 395g, 594g each 6 pcs |
9 | Specimen clamps | 12 or 18 | dia38mm, dia90mm each 6 pcs |
10 | Abrasion table | 6 or 9 | |
11 | Specimen fix ring | 6 or 9 | |
12 | Rubber rings | 12 or 18 | For installing dia90mm specimen |
14 | Load disc | 6 or 9 | |
15 | Accessories Case | 2 | Aluminum-Alloy Case |
This Fabric shrinkage tester is used for testing the shrinkage and relaxation after washing of various textiles such as cotton, wool, silk, linen, chemical fiber, knitwear, costume etc. It is fit for the factory and testing center with the long-term test.
Standards:ISO-6330-2012, ISO 5077, IWSTM31, BS4923, EN25077/26330, JISL1909, FZ/T70009.
Features :
The apparatus used are for industrial design, suit to the harsh long continuous testing requirements
Suspended inner canister exclusive used, smoothly operation without vibration
Include 12 groups washing programes, users can prepare 6 groups their own shrinkage procedures, and provide programs storage
Variable frequency control technology used, to protect the electrical safety and the smooth operation.
Large touch screen display, figures show clearly
Using high-precision pressure sensors, to ensure that accurate and reliable water level.
Outside and inside fully use stainless steel.
Technical parameters:
Category | Horizontal roller type, front door feeding mode |
Inner layer roller | Diameter : 520±1mm |
Depth: 315±1mm | |
Inner & outer roller
gap |
2.8cm±0.1cm |
Lift vane quantity | 3 PCS 120° even distribution |
Lift vane height | 53mm±1mm |
Rotation action | Normal: clockwise rotation (12±0.1)S, stop (3±0.1)S |
anticlockwise rotation (3±0.1)S, stop (12±0.1)S | |
Soft: clockwise rotation (3±0.1)S, stop (12±0.1)S | |
anticlockwise rotation (3±0.1)S, stop (12±0.1)S | |
Rotating speed | Washing time: 52r.p.m |
Spin : (500±20)r.p.m | |
Water level control | Low level:10cm , High level:13cm |
Fill water time | < 2min (water in high level 13cm |
Drainage duration | < 1min (water in high level 13cm) |
Setting range to
water temperature |
Room temperature to 99℃ (accuracy: ±1℃) |
Heating power | 5.4kw |
Washing capacity | 5kg |
External Dimensions | 850mm×750mm×1200mm |
Weight | 140Kg |
Power source | Three-wire four-phase 380V±10% 50Hz |
The washing fastness tester Gyrowash, to determine color fastness to washing or dry cleaning to washing fastness methods, it complies with ISO, BSI, AATCC.
Application:
Washing Fastness Tester, to determine color fastness to washing or dry cleaning to ISO, BSI, AATCC and Marks&Spencers standards.
Available in different sizes such as portable washing fastness tester, etc. The washing fastness tester uses stainless steel rotor to holds washpots on each of four sides and rotates at a constant 40 rpm (+/-2 rpm). Washpots are preheated in appropriate test solution, structure wholly made of very strong stainless steel
Colored touch screen display and PLC control, containers are sealed with either a Neoprene rubber gasket or optional Teflon gasket.
To offer a reliable and safe washing fastness test, Washing fastness tester equipped with water-lacking alarm, protection device when opening door, Test-finished alarm, Automatic shutdown with audible warning etc.
Standard: ISO105 C01-C06, M& SC4A. 5.37. P3B, IWSTM 7.115.177.193.240, 241, AATCC 2, 3, 28, 61, 62, 86, 132, 151, 190, FTMS 191-5610/5622, BS 1006, NEXT
Specifications:
Rotation speed: 40+/-2rpm
Quantity of positions: 6 Pcs 550ml+6Pcs 1200ml
Size of ISO washpot: 550ml 75mm dia x 125mm(3.0 in x 5.0in)
Size of AATCC washpot: 1200ml 90mm diax 200mm(3.5 in x 8.0in)
Temperature : Max 95℃ Adjustable
Running time: Adjustable
Packing list of XHF-13
No. | Name | Qty | Remarks |
1 | Washing Fastness Tester | 1 | Main body |
2 | 550ml washpot | 6 | Be Installed on the machine |
3 | 1200ml washpot | 6 | Be Installed on the machine |
4 | Stainless Steel Balls | 150 | |
5 | Stainless Disks | 12 | |