Laboratory PAD Steamer
Suit able for saturated steam, the time for sample cloth from the tank through t he roll into the steamer is very short, to avoid vulcanization and Shilling dyes are air-oxidized before react, provide the best reproducibility and stability.
1. Stagger in the steamer time to stay at least 20-120 seconds, can adapt to the different thickness of cloth, widely used.
2. The whole machine is exquisitely designed, which does not occupy more space than the traditional type.
3. The required guide cloth is short, easy to operate.
4. The machine is made of high-quality stain less steel S US304.
5. With mechanical break.
6. 350 mm working width.
7. 1.5 liter impregnation tough capacity.
8. Pneumatic pressure system with cylinders by nitrile rubber with 70 +/- 3 shores A.
9. Dimension of roller: diameter: 126mm, length: 350mm
10. Pressure method : pneumatic, pressure：1.0 kg/cm²-5 .0 kg/cm²
Steamer Parameters:
A. Use temperature: saturated steam temperature ( max up to 105℃)
B. Steam: extern al connect inlet DN15. Max 5kg/cm2 s team in, 5kg /hour indirect steam,
C. 15 kg/hour direct steam.
D. Test cloth path: Entire 6 meters, through time 20-120 seconds, frequency control.
E. Temperature indication: dig ital
F. Inlet seal: air seal type.
G. Outlet seal: water seal type.
H. Dimension: 1400×1800×90 0mm
I. Weight: 280 kg
$0.00
Related Products
This Fabric shrinkage tester is used for testing the shrinkage and relaxation after washing of various textiles such as cotton, wool, silk, linen, chemical fiber, knitwear, costume etc. It is fit for the factory and testing center with the long-term test.
Standards:ISO-6330-2012, ISO 5077, IWSTM31, BS4923, EN25077/26330, JISL1909, FZ/T70009.
Features :
The apparatus used are for industrial design, suit to the harsh long continuous testing requirements
Suspended inner canister exclusive used, smoothly operation without vibration
Include 12 groups washing programes, users can prepare 6 groups their own shrinkage procedures, and provide programs storage
Variable frequency control technology used, to protect the electrical safety and the smooth operation.
Large touch screen display, figures show clearly
Using high-precision pressure sensors, to ensure that accurate and reliable water level.
Outside and inside fully use stainless steel.
Technical parameters:
| Category | Horizontal roller type, front door feeding mode |
| Inner layer roller | Diameter : 520±1mm |
| Depth: 315±1mm | |
| Inner & outer roller
gap |
2.8cm±0.1cm |
| Lift vane quantity | 3 PCS 120° even distribution |
| Lift vane height | 53mm±1mm |
| Rotation action | Normal: clockwise rotation (12±0.1)S, stop (3±0.1)S |
| anticlockwise rotation (3±0.1)S, stop (12±0.1)S | |
| Soft: clockwise rotation (3±0.1)S, stop (12±0.1)S | |
| anticlockwise rotation (3±0.1)S, stop (12±0.1)S | |
| Rotating speed | Washing time: 52r.p.m |
| Spin : (500±20)r.p.m | |
| Water level control | Low level:10cm , High level:13cm |
| Fill water time | < 2min (water in high level 13cm |
| Drainage duration | < 1min (water in high level 13cm) |
| Setting range to
water temperature |
Room temperature to 99℃ (accuracy: ±1℃) |
| Heating power | 5.4kw |
| Washing capacity | 5kg |
| External Dimensions | 850mm×750mm×1200mm |
| Weight | 140Kg |
| Power source | Three-wire four-phase 380V±10% 50Hz |
To determine the color fastness of textiles to dry or wet rubbing.
A pinned acrylic sample holder ensures rapid sample mounting and repeatability of results. Fitted with a pre‐determined electronic counter for strokes up to 9999,
Standards: ISO105‐X12, D02, Bs1006 D02, DIN54021, IWS Tm165, JIS K6328.
Technical Parameter:
Testing Time: 1‐99999
Rubber Travel: 104/100mm (Can be adjust)+/- 3mm
Rubbing Speed: 60r/min
Rubbing pressure: 9N
Rubbing Head: Roundness:φ16mm
Dimension: 600mm x 225mm x 270mm
Weight: 11kgs
Power Source: AC 220V, 50Hz
Accessories:
Rubbing clothing 1 (box)
Sand paper 2 (pcs)
Rings 2 (pcs)
The perspiration tester is to determine color fastness to water, perspiration fastness in textiles
Standards:
Perspiration : AATCC 15 , EN ISO 1 05 E04 , DIN 54020 , JIS L0848 , BS 1006 E04 Water : AATC C 107, EN ISO 105 E01 , DIN 54006 , DIN54005 , JIS L 0846 , BS 10 06 E01
Sea water : AATCC 106 , EN ISO 105 E02 , DIN 54007 , JIS L0847 , BS 1006 E02 Application :
It is to deter mine color fastness test t o water, sea water, perspiration fastness in textiles and sublimation during storage. Perspiration tester consists of a stainless steel frame with 21 acrylic separator plates to hold 20 samples. An electric precise oven is required.
Test Procedure:
Treat the composite sample with synthetic perspiration, sea water or water. Place the perspiration tester with 20 samples which held between plates under a given pressure by standard loading weight into an oven for a requested time at a requested temperature.
Compare the degree of fading and pollution of attached white cloth with gray scale, and appraise the perspiration color fastness
Technical Parameter:
AATCC Count Weight: 3.63kg (8LB)
ISO Count Weight: 4.08 kg (9LB)
Laminate w eight: 0.90kg (2LB)
AATCC acrylic separator plates: (22 Pcs)
ISO acrylic separator plates: (21 Pcs)
Weight: 8 K g
Dimensions: 420mm*15 0mm*300 m m(LxWxH)
Application:
Digital Elmendorf Tear Tester, A computer controlled falling-pendulum instrument, to determine the ballistic tearing strength of textiles, plastics, paper or board.
It enables rapid determination of the dynamic resistance of materials designed to be subjected to strong shearing loads (e.g. fabrics) or liable to be damaged by sharp or heavy objects (e.g. paper bags). Subsequently, the test was naturally adopted for all materials in the form of sheet or films, cardboards, cloth, knitted fabrics, plastic films, aluminum foil, non-woven fabrics, complex flexible packaging etc. But does not apply to sparse fabric or stretch materials which tearing direction might be shift in test.
Procedure: The test is carried out on a specimen composed of one or more sheets of standard dimensions 100 x 63 mm, a crack in length of 20 mm of specimen is notched automatically, a usually with a distance of 43mm (1.7 in) remaining to be torn after initiating the tear. The energy of a pendulum of suitable weight is used to completely tear the specimen. The difference in the angle from the vertical of the center of gravity of the pendulum between the downswing and upswing is a measure of the energy absorbed in tearing the sample
This angular movement is measured with a digital encoder and is immediately converted to the mean tearing force for a single sheet by the microprocessor and software incorporated in the apparatus.
Standard: BS 4253, ASTM D1424/5734 , DIN 53862, BS EN ISO 13937, ISO1974/9290.
Features:
Works in accordance with all known test standards. RS-232 data output, equipped Tearing Test software Auto specimen notching
Repeatable, pneumatic specimen gripping system guarantees sufficient clamping pressure to avoid all slipping phenomena,
thus ensuring perfect reproducibility of the experimental conditions.
Automatic compensation for friction and leveling errors, no slave pointer, therefore no friction, alignment and maintenance problems.
Unit: N, gf, cN, Cp can be selected.
Specifications:
- Testing range: A hammer: 0～16N B hammer: 0～32N C hammer: 0～64N D hammer: 0～128N
- Testing accuracy:≤±0.2％F·S
- Tearing length:43mm
- Length of automatic cut:20±0.1mm
- Sample size:100×63mm
- Type of sample clamping: pneumatic clamping
- Power source:AC220V50Hz
- External dimension:520×380×700mm
- Weight: 68kg
Packing list of
| No. | Name | Qty | Remark |
| 1 | Tearing Tester | 1 Set | |
| 2 | Cutting Templates | 1 Pc | For preparing Specimen |
| 3 | Cutting Knifes | 1 Pc | For preparing Specimen |
| 4 | Weights | 1 Set | |
| 5 | Software | 1 | |
| 6 | Air Compressor | 1 | Optional |
The scope of application:
It is used for color matching of any product under different lights, it is wide ly applied in Textile, toy, printing, plastic, rubber, chemical, ink, ceramic,
leather, , paints, chemicals, footwear, leather, metal, food, cosmetics multi-industry field.
Meets to major international standards for visual color evaluation including:
ASTM D17 29, ISO3664, DIN, ANSI and BSI.
Features:
- Tube length: 600mm
- Easy to operate by using individual switches for each light source.
- Elapsed time meter for tracking optimal l amp replacement.
- Automatically alternating among light sources.
- No warm-up time or flickering which insures quick and reliable color judgment
- Economic power consumption and low heat generation for high light efficiency
4 Lights
| Model | Name | Pcs | Power | Color Temperature |
| Four Lights
220V, 50Hz |
D65 | 2 | 36W/Piece | 6500K |
| TL84 | 2 | 36W/Piece | 4000K | |
| F/A | 4 | 40W/Piece | 2700K | |
| UV | 1 | 40W/Piece | 365nnm |
5 Lights
| Model | Name | Pcs | Power | Color Temperature |
| Five Lights
220V, 50Hz |
D65 | 2 | 36W/Piece | 6500K |
| TL84 | 2 | 36W/Piece | 4000K | |
| F/A | 4 | 40W/Piece | 2700K | |
| UV | 1 | 40W/Piece | 365nnm | |
| CWF | 2 | 36W/Piece | 4200K |
6 Lights
| Model | Name | Pcs | Power | Color Temperature |
| Six Lights
220V, 50Hz |
D65 | 2 | 36W/Piece | 6500K |
| TL84 | 2 | 36W/Piece | 4000K | |
| F/A | 6 | 40W/Piece | 2700K | |
| UV | 1 | 40W/Piece | 365nnm | |
| CWF | 2 | 36W/Piece | 4200K | |
| U30 | 2 | 36W/Piece | 3000K |
To alter the specification or modify the appearance without notice right is reserved
Introduction :
Application scope of XHF-05 Martindale Abrasion & Pilling Tester : suitable for the wear-resistance and grinding test under certain pressure of woven and wool-blend fabrics, Leather, knitted goods and non-woven fabric
Standards: ISO5470, IWS TM112/196, DIN53863/53865, BS3424/5690, BS EN 388/530, JIS L1096, ASTM D4966/4970 , ISO17079-2, ISO 12947, ISO17704, ISO 20344, ISO 17076-2, SATRA TM31 and so on.
Features of touch screen Martindale:
1.Machines with two Lissa-jous trajectory.
2.Using color touch-screen operation, PLC control, each working position can be controlled separately.
- Motor overheat protection, convenient operation.
- There is a alarm when the test is finished.
- Data can be restored after the power failure.
Technical Parameters:
Work-station number : 6 or 9 pcs
Counter display : Pre-set counter display: 0-999999
Cumulative counter display: 0-999999
Abrading table diameter : 120mm
Test pressure (abrasion test)
A: cloth specimen clamp:198g +/- 2g
B: textile specimen hammer:395g +/-2g (Equal to 9Kpa)
C: furniture deck specimen hammer:594g +/-2g (Equal to 12Kpa)
Pressure test (pilling test)
A: cloth specimen clamp:155g +/-1g
B: textile specimen hammer:260g +/-1g
Weight of Load hammer: 2385g +/-10g
Dimension: 850mm\ x 600mm x 400mm
Weight: Machine 120kgs Accessories box: 22kgs Voltage supply:220V/110V, 50HZ/60Hz
Packing list
| No. | Name | Quantity | Remark |
| 1 | Abrasion tester | 1 | Main body |
| 2 | Pin Shaft | 6 or 9 | |
| 3 | Hammer | 1 | |
| 4 | Lissa-jous trace pen | 1 | |
| 5 | Dia 140 sample cutter | 1 | |
| 6 | Dia 38 sample cutter | 1 | |
| 7 | Dia 90 sample cutter | 1 | |
| 8 | Weights | 12 or 18 | 395g, 594g each 6 pcs |
| 9 | Specimen clamps | 12 or 18 | dia38mm, dia90mm each 6 pcs |
| 10 | Abrasion table | 6 or 9 | |
| 11 | Specimen fix ring | 6 or 9 | |
| 12 | Rubber rings | 12 or 18 | For installing dia90mm specimen |
| 14 | Load disc | 6 or 9 | |
| 15 | Accessories Case | 2 | Aluminum-Alloy Case |
The Durawash test machine simulates the conditions necessary to meet leading chain stores standard garment and fabric durability tests. The process control systems provide excellent accuracy and repeatability. The physical performance of the durawash is compatible with that of the “Hoovermatic” Twin Tub and complies with the Marks and Spencer Fabric Durability (C15) and Print Durability (P5) methods of test.
Fifteen minutes of testing in the Durawash is approximately equivalent to five domestic washes, removing the need for repeated wash and dry tests.
This results in reduced cost, labor and required laboratory space and an increased capacity for testing
Multiple tests can be performed in this one instrument, including print durability, pleat retention, cockling,
flock retention, crinkling, differential shrinkage, security of attachments and more.
Standards: M&S C15 Print Durability, M&S P5 Durability Wash for Garments and Components, M&S P6
Durability Wash for Pleat Retention, M&S P7 Durability of Waddings and Quilted Waddings to Washing,
NEXT TM 8 Appearance for Garments and Products,
BHS TM 12A Durability Wash for Prints and Flock,
BS 7907:2007: Code of Practice for the design and manufacture of children’s clothing to promote mechanical safety
Features:
- Water bath is made of high quality SUS304 stainless steel.
- Protection: water-lacking alarm, protection device when opening door.
- Test-finished alarm.
- Digital Display
Technical Parameter:
- a)Fabric/Garment Capacity: Approx 2kg
- b) Rotation speed: 560 r/min +/-2%
- c)Specimen size: 500mmx500mm
- d) Max temperature: 60 +/- 2 ℃, (Could be adjustable)
- e) Dimension: 700 x 670 x 900mm
- f) Weight: 75kgs
- g) Power: 220V, 50Hz
Multipurpose Flammability Tester automatically determine the flammability resistance to a vertical flame of apparel fabrics, protective fabrics, curtains and children’s sleepwear.
Standard: BS EN ISO 6940, EN ISO 6941, BS 5438, EN ISO 15025
Technical Parameter:
Ignition of the time range:0-99.99S
Precision: 0.01S
Continued burning time:0-999.9S
Ignition fire mouth: According to ISO 6941 Standard
Fire Mouth angle: 0°/30°/90°(Adjustable)
Flame Measurement Height: 20mm/40mm
Dimension inside U clamp: 80mmx600mm
Mark line on U clamp: adjustable
Dimension:800mmX550mmX660mm
Weight: 50kgs
Power: AC 220V/110V
Use: Suitable for high temperature (or normal temperature) dyeing, washing, dry-cleaning and samples colorfastness test.
Applied Range:
Suitable f or all kinds of yarn and fabric dyeing experiments, especially for N, N/C, T/N and other kinds of knitted and woven cloth, spandex lake, have better levelness and reproducible.
Features:
With internal heating type silicon carbide heat conduction, to avoid the old infrared machine with heat conduction oil as heat carrier inflammable and explosive fatal flaw.
Use stainless steel infrared heater, compared with the external heating infrared glass lamp life long, long time.
Without glycerin, lampblack pollution; Due to the adopted high-power air cooling system, and therefore there is no loss of cooling water;
Heating power is only 1/3 of the traditional oil heat infrared machine, and heat preservation, constant temperature effect is good, save water, electricity, etc Line costs.
Programmable LCD computer installations, a variety of expressions, real time monitor the working state of the curve of the test process and relevant operation.
Adopts frequency conversion control, adjustable rotary speed, better co operate with the scene of the production process works.
To adapt to different kinds of fabric and dyeing processing, the method of general configuration routine for 24 cups of 300ml.
Technical Parameter:
- Number of steel cup: 24
- Dyed cup material: stainless steel 316 l a stretch forming.
- Cup specification: 300 ml.
- Rotational speed: 0-45 rpm
- Operating temperature : room temperature to 14 0 ℃.
- Temperature control precision:±2℃
- Heating rate: 0.5 – 33 ℃ / min (full cup slightly lower, about 3 ℃ / min)
- Cooling: forced air cooling.
- Heat conduction medium: carborundum.
10 . Power specifications: 110V, 60Hz, Single phase
11 . Dimension : 750mm * 7 75mm * 775 mm (long * deep * high).
12 . Machine weight: about 195 kg.
The scope of application:
Used in a variety of textiles, non‐ woven fabric, leather and other materials, while force (flexible diaphragm law ) in latitude and longitude and in all directions , expansion force and dilation of the performance measurement .
Related standards: ASTM D3786, ISO 13938.1
Instrument characteristics:
- Use 16bit Industry‐grade MCU (ATMEL, US A), more excellent anti ‐jamming, more excellent stability
- Print t he test reports by built‐in thermal printer
- Dial pressure mete r to show pressure applied to specimen
- Proveded with a touch screen readout of pressure, time of burst,
- height of burst and the peak hold facility
- High quality and renewable rubber diaphragms, manual griping device, and forward reverse and neutralal drive sys tem.
Technical Parameters:
| Test Area | φ30 .5±0.05mm (7.3cm2) | ||
| Test Area | φ79 .8mm±0.05 mm (50cm2 ) | ||
| Capacity | 0~6MPa (6000K pa) | ||
| Fluid rate | Adjustable | ||
| Bursting strength accuracy | ±0. 5%FS | ||
| Hydraulic fluid | glycerin with concentration 85% | ||
| Power supply | Ac220V 50Hz/110V, 60Hz | ||
| Instrument dimension | 560 ×400×680mm(L×W×H) | ||
| weight | 70kg | ||
| Packing list of XHF‐16 | |||
| No. | Name | Quantity | Remark |
| 1 | Bursting Strength Tester | 1 | Main body |
| 2 | Diaphragm | 5 | |
| 3 | Specimen holders | 1 set | φ30.5± 0.05mm |
| 4 | Specimen holders | 1 set | φ79.8mm±0.05mm |
| 4 | Spanner | 1 | Disassemble Holders |
Used in a variety of textiles, non- woven fabric, leather and other materials, while force ( flexible diaphragm law ) in latitude and longitude and in all directions , expansion force and dilation of the performance measurement .
Integrated safety shied
Provided with a touch screen readout of pressure, time of burst, height of burst
Big touch screen operation, also can use PC operation.
High quality and renewable rubber diaphragms, manual griping device, and forward reverse and neutral drive system
High quality AC servo motor driven
Related standards : ASTM D3786, ISO 13938.1, BS 3424 (PT. 6), ISO 3033-B, EN 12332-2
Features:
Hydraulic pressure to 6000Kpa
Quick change bells
Diaphragm correction
Automatic flow rate adjustment
Software analysis for full results
Distension measurement up to 70mm
Technical Parameters :
Capacity 0~6MPa (6000Kpa)
Test Speed Adjustable, 20-800ml/min
Bursting strength accuracy ±0.5%FS
Hydraulic fluid glycerin with concentration 85%
This machine is used to determine not only the fabric hydrostatic pressure resistance, but also the hydrostatic pressure proof performance of the coating materials.
Standards: ISO-811, AATCC 127, BS EN20811, ISO 1420
Features:
Microcomputer control, English LCD menu, four built-in test methods .
The built-in tank design, creative balance system of water pressure rate, rising speed stability and accuracy.
Clamp made of stainless steel, equip LED light to view specimen clearly
Testing Methods:
Turbocharged Constant pressure time
(It means at the constant pressure, how long can appear the first water drop on the specimen)
Constant pressure regularly (It means at the constant pressure and specify time,
if can appear water drop on the specimen).
Leakage water method
Technical Parameter:
Testing range: 0.5kpa-200kpa
Accuracy: 0.2%F.S
Elevation Speed: 1kpa-30kpa
Clamp Area: 100cm2
Testing Units:（pa mmHg cmH2O）
Power: AC 220V 50Hz
Dimension: 550x400x500mm
Weight: 55kg