Laboratory Yarn Package Dying
It is mainly used for dyeing, boiling, bleaching and washing processes such as cotton, wool and chemical fiber, and also for dyeing of small batch of cloth.
The dyed fabric in dyeing tank, heated dye, circular flow circulating pump and steering mechanism of compulsory membership continuously alternating dye dye, t he dye in the process of a given temperature and time to reach the purpose of uniform dyeing. All parts o f the body and the dye and contact are corrosion-resistant stainless steel.
1 Features:
1) This ma chine has compact structure, small bath ratio, PLC with touch screen control, automatic control of the whole process flow and high degree of automation, batch storage of all inputs/out puts.
2) Circulating: the corrosion of mixed flow pump with reversing device, according to the liquor circulation process.
3) Slot seal form: use silicon rubber O seal ring .
4) Equipped with pneumatic valves, main cylinder and flip plate level controller, equipped with safety interlocking mechanism, main cylinder is equipped with stainless steel safety valve, manual opening and temperature control, it can set 85 degrees of safety protection.
5) The dye reversing control, computerize automatic changeover control.
6) Temperature control system: large screen touch screen PLC control, flexible and
convenient operation system, digitalization of process Parameters, and high degree of automation. Modern information network can b e used to realize remote diagnosis and troubleshooting.
7) Process flow: the whole process flow only needs to be finished manually. Other operations are automated in accordance with the process setting process. The following are: inlet, c all, yarn entry, start up pu mp, chemical feed, ratio feed, temperature rise, s hut down pressure relief valve, temperature drop, opening pressure relief valve , turn off pump, drainage , water inlet , circulating water washing, chemic al barrel cleaning, drainage, and call out.
8) VAT material: use 316L stainless steel sheet production .
9) High temperature/high pressure package, suitable for 1- 6 packages with diameter 20cm, positive displacement pump, flow reversal, constant static pressure control during dyeing, additions tank, high temperature drain.
Technical Parameter:
1. Maxim um working capacity: 6kg
2. Minimum working capacity: 3kg
3. The highest working pressure: 0 .40MPa
4. Design the highest pressure: 0. 5MPa
5. Maxim um working temperature: 140 centigrade
6. Working medium: D ye
7. Bath ratio: 1:6 to 1: 15
8. Power supply: 380V , 50HZ
9. Main p ump motor power: 3KW
10. . Water intake and discharge: D N20 ball valve
11. Form of heating: electric heating
12. Machine size: L x W x H:125 0 x 800 x 18 80mm
$0.00
Related Products
Used in a variety of textiles, non- woven fabric, leather and other materials, while force ( flexible diaphragm law ) in latitude and longitude and in all directions , expansion force and dilation of the performance measurement .
Integrated safety shied
Provided with a touch screen readout of pressure, time of burst, height of burst
Big touch screen operation, also can use PC operation.
High quality and renewable rubber diaphragms, manual griping device, and forward reverse and neutral drive system
High quality AC servo motor driven
Related standards : ASTM D3786, ISO 13938.1, BS 3424 (PT. 6), ISO 3033-B, EN 12332-2
Features:
Hydraulic pressure to 6000Kpa
Quick change bells
Diaphragm correction
Automatic flow rate adjustment
Software analysis for full results
Distension measurement up to 70mm
Technical Parameters :
Capacity 0~6MPa (6000Kpa)
Test Speed Adjustable, 20-800ml/min
Bursting strength accuracy ±0.5%FS
Hydraulic fluid glycerin with concentration 85%
The scope of application:
Used in a variety of textiles, non‐ woven fabric, leather and other materials, while force (flexible diaphragm law ) in latitude and longitude and in all directions , expansion force and dilation of the performance measurement .
Related standards: ASTM D3786, ISO 13938.1
Instrument characteristics:
- Use 16bit Industry‐grade MCU (ATMEL, US A), more excellent anti ‐jamming, more excellent stability
- Print t he test reports by built‐in thermal printer
- Dial pressure mete r to show pressure applied to specimen
- Proveded with a touch screen readout of pressure, time of burst,
- height of burst and the peak hold facility
- High quality and renewable rubber diaphragms, manual griping device, and forward reverse and neutralal drive sys tem.
Technical Parameters:
| Test Area | φ30 .5±0.05mm (7.3cm2) | ||
| Test Area | φ79 .8mm±0.05 mm (50cm2 ) | ||
| Capacity | 0~6MPa (6000K pa) | ||
| Fluid rate | Adjustable | ||
| Bursting strength accuracy | ±0. 5%FS | ||
| Hydraulic fluid | glycerin with concentration 85% | ||
| Power supply | Ac220V 50Hz/110V, 60Hz | ||
| Instrument dimension | 560 ×400×680mm(L×W×H) | ||
| weight | 70kg | ||
| Packing list of XHF‐16 | |||
| No. | Name | Quantity | Remark |
| 1 | Bursting Strength Tester | 1 | Main body |
| 2 | Diaphragm | 5 | |
| 3 | Specimen holders | 1 set | φ30.5± 0.05mm |
| 4 | Specimen holders | 1 set | φ79.8mm±0.05mm |
| 4 | Spanner | 1 | Disassemble Holders |
Fabric Thickness tester is applicable of measuring the thickness o f tissue pap er, woven, knitted fabric s, non- woven and o ther uniform materials. It is designed according to
Standards: ISO5084 ,FZ/T6000 4, ISO9073, ISO 98 63….etc.
Technical Para meter :
Thickness measuring range : 0-25mm
Min. graduation value : 0.001 mm
Press foot diameter: 11.28mm , 50.48 mm, 56.42 mm, 112.84 mm
Press er foot area : 100, 2000, 2500, 1000 0(mm2)
Weighing poise : 5cN*1, 10cN*2, 50cN*2, 100cN*1,4 00cN*1,1000 cN*1 (combine)
Press time: 10s,30s
Test speed: when press time is 10s, about 2.1 times/minutes; when press time is
30s, 1.2 times/minutes.
Weight : 30kg
External Dimensions : 210x450x400mm
Power source : A C220V±10% 50Hz
Yarn count machine works with textile electronic balance is a kind of intellectual measuring instrument with weighing, counting and other many functions. The product introduces imported Integrated circuit and enjoys stable and reliable performance, easy operation and accurate weighing and counting. As a kind of measuring instrument, it has been widely used by enterprises and scientific research institutions.
Function:
It has: g,oz,tex,Nm,Ne,D,g/m2kinds of the units to change. Select 1-10 pcs specimen measurement
It can print the date, time, specimen length, each weighing value, calculated MIN (minimum), MAX (maximum), SUM (sum), AV (average), CV% (non-uniform rate). Overload malfunction indication.
Working Condition:
Working Temperature: 0°～40°C
Maximum Consumed Power: 3W
Pan Size: Diameter 80mm
Power Supply: Adaptor input -220V±10﹪, 50HZ±1HZ。Output- 9v，300mA
Comparative Humidity: 50﹪～85﹪
Range: 210g
Accuracy: 1mg (0.001g)
Standard Configuration: Balance, Printer, Calibration Weight
This Button Pull Snap Tester is the unique safety test instrument that provides a means to accurately measure how safe accessories are attached in a product. It is also used to compare a variety of accessories from different vendors in the process from product design to production. It is a simple but effective design mainly consisting of a high precision gauge, a sturdy stand and special grips/clamps. It requires very little train. A sample required by standards & regulations is to be fixed horizontally (constant force is applied to secure the sample) so that snap or other accessories attached in fabric can be clamped into.
It can be used in buttons, zippers, toys testing for many brands like NEXT, M&H, GAP, M&S, NIKE, LIVIS, and other famous brands necessary attachments are available.
.
Standards:16 CFR 1500.51~53、ASTM F963、EN71-Part 1、M&S P115A., H&M, NEXT etc
Standard package 1-16:
1- Imada Force Gauge FB-30K
2- Upper Stud Grip
3- Upper Grasp Button Grip (Upper Tip-Top Grip)
4- Lower Fabric Clamp
5- Low Grasp Button Accessories Kit
6- Three Pronged Clamp
7- Calibration Weight 15LB
8- Mechanical Stand for Imada Force Gauge
9- Upper Long Nose Vise Grip
10- Upper Universal Grip
11- Button snap attachment
12- Extension rod for lower clamp
13- Allen key for handling fitting (2mm)
14- Protective goggles
15- Supper rubber O rings 5 pcs.
16- Operation Manual
The perspiration tester is to determine color fastness to water, perspiration fastness in textiles
Standards:
Perspiration : AATCC 15 , EN ISO 1 05 E04 , DIN 54020 , JIS L0848 , BS 1006 E04 Water : AATC C 107, EN ISO 105 E01 , DIN 54006 , DIN54005 , JIS L 0846 , BS 10 06 E01
Sea water : AATCC 106 , EN ISO 105 E02 , DIN 54007 , JIS L0847 , BS 1006 E02 Application :
It is to deter mine color fastness test t o water, sea water, perspiration fastness in textiles and sublimation during storage. Perspiration tester consists of a stainless steel frame with 21 acrylic separator plates to hold 20 samples. An electric precise oven is required.
Test Procedure:
Treat the composite sample with synthetic perspiration, sea water or water. Place the perspiration tester with 20 samples which held between plates under a given pressure by standard loading weight into an oven for a requested time at a requested temperature.
Compare the degree of fading and pollution of attached white cloth with gray scale, and appraise the perspiration color fastness
Technical Parameter:
AATCC Count Weight: 3.63kg (8LB)
ISO Count Weight: 4.08 kg (9LB)
Laminate w eight: 0.90kg (2LB)
AATCC acrylic separator plates: (22 Pcs)
ISO acrylic separator plates: (21 Pcs)
Weight: 8 K g
Dimensions: 420mm*15 0mm*300 m m(LxWxH)
Jigger Dyeing Machine is suitable to test the dyeing of cotton and linen cloth, viscose, man-made fiber, etc., and suitable for dye material, such as direct dyes, acid dyes, basic dyes, insoluble azo dyes, and reactive dyes, etc. This apparatus can achieve bleaching and dyeing with low-liquor ratio, simulates as nearly as possible the mechanism of production jigs.
Jigger Dyeing Machine is specially designed to satisfy the requirements of testing dye formula before quantity production of dyeing and finishing enterprise. This apparatus simulates as nearly as possible the mechanism of production jigs’ requirements of speed, temperature, pre-tension, etc. of real production process. Compared with production machine, this Laboratory Jig Dyeing Machine’s size is smaller, consumes small quantity of dye, and with short testing process, so operator is easier to change dye formula, and finds suitable dye formula in a short time. Therefore this machine is well welcomed by many dyeing and finishing enterprise
Manual Operation Mode Interface
Technical Parameter:
Control Mode: Touch Screen+ PLC
Effective Roller Width: ≤500mm
Roller Diameter: F 57mm- F 200mm
Cloth speed :0.5-8m/min +/- 0.001 m/min
Temperature Range and accuracy: Room Temperature -98℃+/- 2℃
Temperature Ratio: 1-3 ℃
Tension: 0-18kgs
Material tension control mode: the difference speed between A and B roller.
Cooling: automatic water cold system
Power: AC 380V, 50Hz
To determine the color fastness of textiles to dry or wet rubbing.
A pinned acrylic sample holder ensures rapid sample mounting and repeatability of results. Fitted with a pre‐determined electronic counter for strokes up to 9999,
Standards: ISO105‐X12, D02, Bs1006 D02, DIN54021, IWS Tm165, JIS K6328.
Technical Parameter:
Testing Time: 1‐99999
Rubber Travel: 104/100mm (Can be adjust)+/- 3mm
Rubbing Speed: 60r/min
Rubbing pressure: 9N
Rubbing Head: Roundness:φ16mm
Dimension: 600mm x 225mm x 270mm
Weight: 11kgs
Power Source: AC 220V, 50Hz
Accessories:
Rubbing clothing 1 (box)
Sand paper 2 (pcs)
Rings 2 (pcs)
This Tabletop spectrophotometer has the advantage of excellent inter-instrument agreement, high accuracy and good replicability.
It could meet your requirement for both color quality control and color matching very easily.
Brief Introduction
- Transmission D/0 Structure and Reflection D/8 Structure
- Double Optical Paths Spectral Analysis Technology.
It could get the measurement sample data and internal environment data at the same time to make sure the testing accuracy and
stability for long time running.
- Compatible with SCI/SCE Measurement.
Adopt D/8 illuminant condition recommended by the CIE to meet the color testing requirement for different industries. It could measure with SCI and SCE to see the color data change more clearly.
- Four Testing CalibersIt is easy to adjust the testing calibers.The largest caliber diameter reaches 25.4mm. It could test the sample with different sizes.
This is not only suitable for testing the color of opacity sample, but also suitable for transparent or translucent sample’s transmittance and turbidity.
- Large screen display and Stand-alone operation.It could finish the sample test without connecting with the computer. Large screen display to make sure customer could see the testing result directly and clearly and it will be more convenient to set the instrument status. The color quality management software and color match software are optional according to customer’s need.
- Unique Calibration Board Design.Fix the calibration board on the testing caliber to make sure the accuracy of the white calibration and guarantee the high accuracy for measurement.
- Flexible Test Fixture.It could fix the sample with different size and thickness on the testing port tightly in case of stray light entering to affect the testing accuracy.
Technical Data:
| Type | XHF-CS-820 | |
| Measurement Condition | Reflection: d/8(Diffused lighting, 8 degrees receiving) Compatible with SCI/SCE Measurement ISO7724/1、DIN5033 Teil7、JIS Z8722 condition C、CIE No.15、ASTM E1164）Transmission d/0(Diffused lighting, Vertical direction receiving) | |
| Size of integrating sphere | Φ15.2cm, Alvan diffused reflection surface coating | |
| Illumination Light source | CLEDs(entire wavelength balanced LED light source） | |
| Sensor | dual light path sensor array | |
| Wavelength range | 400-700nm | |
| Wavelength interval | 10nm | |
| Half spectral width | 5nm |
| Reflectivity range | 0-200% | |
| Reflectivity resolution | 0.01% | |
| Observation angle | 2°/10° | |
| Measurement light source | A,C,D50,D55,D65,D75,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12
CWF,U30,DLF,NBF,TL83,TL84 |
|
| Data being displayed | SPD distribution/data, sample’s color values, color difference Values / graph, pass/fail results, color error tendency, history data color
simulation, manual input standard sample, generate measurement report |
|
| Measurement time interval | 2 seconds | |
| Large Aperture (LAV):2.54cm (=1inch) | ||
| Reflection Aperture | Medium Aperture (MAV):1.5cm(=0.6inch) | |
| Small Aperture (SAV):0.75cmx1.0cm(0.3inch x 0.4inch) | ||
| Very Small Aperture (VSAV):0.3cmx0.8cm(0.12inch x 0.31inch) | ||
| Color space | CIE-L*a*b,L*C*h,CIE-L*u*v,XYZ,Yxy,Transmittance, Hunterlab, | |
| Munsell MI,CMYK, RGB，HSB | ||
| Color difference formulas | ΔE*ab,ΔE*CH,ΔE*uv,ΔE*cmc(2:1),ΔE*cmc(1:1),ΔE*94,ΔE*00 | |
| ΔEab(Hunter),555color classification | ||
| Other colorimetric indices | WI(ASTM E313-10,ASTM E313-73,CIE/ISO, AATCC, Hunter, Taube
Berger, Ganz, Stensby),YI(ASTM D1925，ASTM E313-00,ASTM E313-73),Tint(ASTM E313-00,CIE,Ganz),Metamerism index Milm, Stick color fastness, Color fastness, APHA, Pt-Co, Gardner |
|
| Repeatability | light splitting reflectivity: standard deviation within 0.08% color values: ΔE*ab<=0.015(After calibration, standard deviation of 30 measurements on test white board, 5 second intervals, Maximum: 0.03 | |
| Interface | USB | |
| Data storage | mass storage | |
| Light source longevity | 5 years, 1.5 million tests | |
| Size | 583*330*304mm(L*W*H) | |
| Work temperature range | 15℃-32℃ (60°F-90°F) | |
| Relative Humidity | 0℃ to 45℃，relative humidity 80% or below at 35°C, no condensation | |
| Standard accessories | AC power line, color management software, drive software, USB
cable, black/white calibration tube, 40*10 cuvette, cuvette support, testing report |
|
| Optional | 40×40 cuvette | |
This machine is suitable for dyeing in common temperature (20℃-100℃)
and the operation is simple. Neutral alkali, salt and other additions can be softly added during the process of dyeing.
It also applies to the cotton bath, soap and bleached experiment
Features:
Equip imported motor with large Angular moment from Taiwan.
The shell is made of stainless steel S.S304 material
Programmable Temperature controller and PT-100 probe
Technical Parameter:
Number of Beaker: (24Cups)
Beaker Specification: 250cc Triangular Glass Beaker
Oscillation Speed: 30-200 reciprocation/min
(shaking from right to left)
Temperature Range: Room Temperature – 100℃
Heating: Electrical Heating
Power Supply: 4kw, AC220V, 50HZ
Overall Dimension (L*W*H): 106*55*72c m
Included: 250cc Triangular glass Beaker
Multipurpose Flammability Tester automatically determine the flammability resistance to a vertical flame of apparel fabrics, protective fabrics, curtains and children’s sleepwear.
Standard: BS EN ISO 6940, EN ISO 6941, BS 5438, EN ISO 15025
Technical Parameter:
Ignition of the time range:0-99.99S
Precision: 0.01S
Continued burning time:0-999.9S
Ignition fire mouth: According to ISO 6941 Standard
Fire Mouth angle: 0°/30°/90°(Adjustable)
Flame Measurement Height: 20mm/40mm
Dimension inside U clamp: 80mmx600mm
Mark line on U clamp: adjustable
Dimension:800mmX550mmX660mm
Weight: 50kgs
Power: AC 220V/110V
It is used for the test for drying process and the drying procedures needed by other textiles ,which are prescribed in the standard textiles.
Standard: BS EN ISO 6330-2012, AATCC 135, NEXT standards
Features:
Quality steel with hot coatings as outer shell, and drum is made of stainless steel.
The new impact design ensures silent running and safe operation.
Micro computer control drying temperature, automatic cooling before drying finished.
Digital electricity, hardware control, strong anti-interference ability.
With door open protection.
Drying time can be random selected.
Max loading capacity can reach 15kgs (rated 10kgs).
Technical Parameter:
Type: front-loading, horizontal drum
Rated specimen drying: 10kg
Drying time: room temperature-80℃
Drum diameter: 695mm
Drum depth: 435mm
Drum volume: 165L
Drum speed: 50 r/min
Lifting vanes number: 3 pcs, 120 ° between each one
Power: 220V, 50Hz, 5.5KW
Dimension: 785×960×1365mm
Weight: 100kgs