Locus Circular Tester

Jigger Dyeing Machine is suitable to test the dyeing of cotton and linen cloth, viscose, man-made fiber, etc., and suitable for dye material, such as direct dyes, acid dyes, basic dyes, insoluble azo dyes, and reactive dyes, etc. This apparatus can achieve bleaching and dyeing with low-liquor ratio, simulates as nearly as possible the mechanism of production jigs.

Jigger Dyeing Machine is specially designed to satisfy the requirements of testing dye formula before quantity production of dyeing and finishing enterprise. This apparatus simulates as nearly as possible the mechanism of production jigs’ requirements of speed, temperature, pre-tension, etc. of real production process. Compared with production machine, this Laboratory Jig Dyeing Machine’s size is smaller, consumes small quantity of dye, and with short testing process, so operator is easier to change dye formula, and finds suitable dye formula in a short time. Therefore this machine is well welcomed by many dyeing and finishing enterprise

Manual Operation Mode Interface

 Technical Parameter:

 Control Mode: Touch Screen+ PLC

 Effective Roller Width: ≤500mm

 Roller Diameter:  F 57mm- F 200mm

 Cloth speed :0.5-8m/min +/- 0.001 m/min

 Temperature Range and accuracy: Room Temperature -98℃+/- 2℃

 Temperature Ratio: 1-3 ℃

 Tension: 0-18kgs

Material tension control mode: the difference speed between A and B roller.

 Cooling: automatic water cold system

 Power: AC 380V, 50Hz

Multipurpose Flammability Tester automatically determine the flammability resistance to a vertical flame of apparel fabrics, protective fabrics, curtains and children’s sleepwear.

Standard: BS EN ISO 6940, EN ISO 6941, BS 5438, EN ISO 15025

Technical Parameter:

Ignition of the time range:0-99.99S

Precision: 0.01S

Continued burning time:0-999.9S

Ignition fire mouth: According to ISO 6941 Standard

Fire Mouth angle: 0°/30°/90°(Adjustable)

Flame Measurement Height: 20mm/40mm

Dimension inside U clamp: 80mmx600mm

Mark line on U clamp: adjustable

Dimension:800mmX550mmX660mm

Weight: 50kgs

Power: AC 220V/110V

This Fabric shrinkage tester is used for testing the shrinkage and relaxation after washing of various textiles such as cotton, wool, silk, linen, chemical fiber, knitwear, costume etc. It is fit for the factory and testing center with the long-term test.

  Standards:ISO-6330-2012, ISO 5077, IWSTM31, BS4923, EN25077/26330, JISL1909, FZ/T70009.

 Features :

 The apparatus used are for industrial design, suit to the harsh long continuous testing requirements

Suspended inner canister exclusive used, smoothly operation without vibration

Include 12 groups washing programes, users can prepare 6 groups their own shrinkage procedures, and provide programs storage

Variable frequency control technology used, to protect the electrical safety and the smooth operation.

Large touch screen display, figures show clearly

Using high-precision pressure sensors, to ensure that accurate and reliable water level.

 Outside and inside fully use stainless steel.

Technical parameters:

Rotary Crock Meter to determine the color fastness of textiles to dry and wet rubbing particularly for printer fabrics. Applies 1134g of pressure on a 16mm finger and rotates 1.125 turns clockwise then anti-clockwise. The operating handle is however turn in one direction only.

Standards: AATCC 116;   ISO 105 X16

 Technical Parameter:

Diameter of rubber head: Diameter of rubbing head: 16±0.1mm

Turning of vertical pole: after turning1.125 circles then reverse

Dimensions: 260×150×210mm

Weight: 5kg

Optional:

AATCC crocking clothes 1Box (1000Pcs)

AATCC grey scale

Use: Suitable for high temperature (or normal temperature) dyeing, washing, dry-cleaning and samples colorfastness test.

Applied Range:

Suitable f or all kinds of yarn and fabric dyeing experiments, especially for N, N/C, T/N and other kinds of knitted and woven cloth, spandex lake, have better levelness and reproducible.

Features:

With internal heating type silicon carbide heat conduction, to avoid the old infrared machine with heat conduction oil as heat carrier inflammable and explosive fatal flaw.

Use stainless steel infrared heater, compared with the external heating infrared glass lamp life long, long time.

Without glycerin, lampblack pollution; Due to the adopted high-power air cooling system, and therefore there is no loss of cooling water;

Heating power is only 1/3 of the traditional oil heat infrared machine, and heat preservation, constant temperature effect is good, save water, electricity, etc Line costs.

Programmable LCD computer installations, a variety of expressions, real time monitor the working state of the curve of the test process and relevant operation.

Adopts frequency conversion control, adjustable rotary speed, better co operate with the scene of the production process works.

To adapt to different kinds of fabric and dyeing processing, the method of general configuration routine for 24 cups of 300ml.

Technical Parameter:

1. Number of steel cup: 24

2. Dyed cup material: stainless steel 316 l a stretch forming.

3. Cup specification: 300 ml.

4. Rotational speed: 0-45 rpm

5. Operating temperature : room temperature to 14 0 ℃.

6. Temperature control precision:±2℃

7. Heating rate: 0.5 – 33 ℃ / min (full cup slightly lower, about 3 ℃ / min)

8. Cooling: forced air cooling.

9. Heat conduction medium: carborundum.

10 . Power specifications: 110V, 60Hz, Single phase

11 . Dimension : 750mm * 7 75mm * 775 mm (long * deep * high).

12 . Machine weight: about 195 kg.

Xenon light fastness tester is mainly used for test of the color fastness to light and weather fastness of all kinds of nonferrous, coloring textile; it can also be used for testing the color fastness and ageing of painting, pigment, paint, rubber, plastic, paper and other materials. It has high intelligence, high measurement and control precision, stable performance; and it also has touch screen which is graphic mark displaying, friendly interface, it also easy to operate.

Standard: ISO105-B02/B04/B06 AATCC 16 JIS L0843 ISO 4892-2

Feature:

1. Using 3300W long arc xenon lamp, truly simulate daylight spectrum;
2. Adopt high transmittance filter combination, using 95% of the transmittance of the filter and the filter

    cylinder, to achieve the same irradiance optical requirements of low power consumption,

    makes the instrument more energy saving and environmental protection

4. Automatic compensating system (PATENT) control the Xenon Lamp Power.
5. Large touch screen, indicate the condition of chamber at real-time, be able to presetting irradiance,

     temperature (BPT or BST, chamber), humidity  and plot dynamic curve of them.

5. The operator simply selects the required test module and test standards;
6. 6.  English user interface, diagram indicate condition of chamber, easy to use.
7. 7.PLC control, powerful program and storage property, save the parameters when interrupt of power supply.
8. Custom program capability and storage for additional user-defined tests.
9. 9.Built-in diagnostics and warnings, automatic prompt when lamp or optical filters require changing.
10. 1 Multi-position sensor to supervise working condition, temperature, humidity, fan, xenon lamp, and door to chamber, it makes device work properly and reliably.
11. 1Adopt (PATENT) military transmission technology in order to prevent electronic parts aging because of wireless transmission.
12. A test can be 1000 hours of continuous operation of quality assurance.

Technical Parameter:

 Light source: 3300W air-cooled long-arc xenon lamp Life of lamp: 1000-1500 hours

 Chamber Temperature range: 25 ~ 50 C, accuracy: +/- 2 C

 Blackboard  temperature   range: 30-80 C   Accuracy: +/- 3 C

 Humidity range: 10 ~ 95% RH, accuracy: +/- 5%

 Irradiance: 0.60 ~ 2.01W/m2/420nm (340nm, 300~400nm, 300~800nm is offered on request), Digital set, automatic closed-loop compensation

Control Accuracy of Irradiance: +/- 0.02W/m2/420nm

 Photoperiod: ≤1000h

 Spray cycle: ≤1000h

 Rotation speed of sample holder: revolution 5r/min

 Dimension: 1200 x 800 x 1720mm

 Weight: 213kg