LVDV-2 Viscometer
DESCRIPTION:
Used for Inks Latex Adhesives dyes and chemicals (Solvent base) Polymer Solutions Oils Paints and Coatings Solvents Cosmetics Dairy Products Pharmaceuticals Juices, etc
Digital instrument for the measuring of viscosity with all data reading on display, serial , output RS-232C to connect a PC, DV-Loader software and analogical output 0-1 Vdc. Intermediate model ready to use PC for data process. Full interchangeable to Brookfield accessories range. The LCD display shows simultaneously: viscosity in cP or mPas, torque %, rpm, installed spindle, temperature in °C or °F, shear rate, shear stress.
Display information: Viscosity (mPa.s), Temperature: C , Speed/Spindle, Shear Rate/ Stress,
Built in option: Timed tests, Choice of speed, RTD temp probe
Speed selection: Appropriate rg of speeds with easy selection
Accuracy: ±1.0%of rg
Repeatablity: ± 0.5%
Auto Rg showing: Full scale rg, Max viscosity measured,
Spindle/Speed Combination
Complete set of LV spindle
DV Loader software
DV gather and analysis software
RTD temp probe
Operation manual
Feature:
DV Gather Software is used to get total control of your instrument and test parameters
Shear Rate/Stress With Special Spindles
Bi-directional RS-232 PC interface
Configurate RTD Temperature Probe
Stepping Motor means Accurate, reliable operation
Direct readout of all measurement parameters
Auto Range Showing
Time Function for measurement
Sound alarm at under 20% Torque
Linear calibration
Wide range power supply:100V-240V
Technical Parameter:
Range: 6-6,000,000 (mPa.s)
Speed: 0.1- 200rpm
Spindles: L1, L2, L3, L4
Accuracy: ±1 %(FS)
Repeatability: ±0.5%
Power: 100-240V, 50-60Hz
$2,775.00
Related Products
Application:
It is used for color matching of any product under different lights, it is wide ly applied in Textile, toy, printing, plastic, rubber, chemical, ink, ceramic,
leather, , paints, chemicals, footwear, leather, metal, food, cosmetics multi-industry field.
Meets to m ajor international standards for visual color evaluation including:
ASTM D17 29, ISO3664, DIN, ANSI and BSI.
Tube length: 12 00mm
Easy to operate by using individual switches for each light source.
Elapsed time meter for tracking optimal l amp replacement.
Automatically alternating among light sources.
No warm-up time or flickering which insures quick and reliable color judgment
Economic power consumption and low heat generation for high light efficiency
Lights:
Model | Name | Pcs | Power | Color Temperature |
Six Lights
220V, 50Hz |
D65 | 2 | 36W/Piece | 6500K |
TL84 | 2 | 36W/Piece | 4000K | |
F/A | 6 | 40W/Piece | 2700K | |
UV | 1 | 40W/Piece | 365nnm | |
CWF | 2 | 36W/Piece | 4200K | |
U30 | 2 | 36W/Piece | 3000K |
To alter the specification or modify the appearance without notice right is reserved
To determine the color fastness of textiles to dry or wet rubbing.
A pinned acrylic sample holder ensures rapid sample mounting and repeatability of results. Fitted with a pre‐determined electronic counter for strokes up to 9999,
Standards: ISO105‐X12, D02, Bs1006 D02, DIN54021, IWS Tm165, JIS K6328.
Technical Parameter:
Testing Time: 1‐99999
Rubber Travel: 104/100mm (Can be adjust)+/- 3mm
Rubbing Speed: 60r/min
Rubbing pressure: 9N
Rubbing Head: Roundness:φ16mm
Dimension: 600mm x 225mm x 270mm
Weight: 11kgs
Power Source: AC 220V, 50Hz
Accessories:
Rubbing clothing 1 (box)
Sand paper 2 (pcs)
Rings 2 (pcs)
Application:
Digital Elmendorf Tear Tester, A computer controlled falling-pendulum instrument, to determine the ballistic tearing strength of textiles, plastics, paper or board.
It enables rapid determination of the dynamic resistance of materials designed to be subjected to strong shearing loads (e.g. fabrics) or liable to be damaged by sharp or heavy objects (e.g. paper bags). Subsequently, the test was naturally adopted for all materials in the form of sheet or films, cardboards, cloth, knitted fabrics, plastic films, aluminum foil, non-woven fabrics, complex flexible packaging etc. But does not apply to sparse fabric or stretch materials which tearing direction might be shift in test.
Procedure: The test is carried out on a specimen composed of one or more sheets of standard dimensions 100 x 63 mm, a crack in length of 20 mm of specimen is notched automatically, a usually with a distance of 43mm (1.7 in) remaining to be torn after initiating the tear. The energy of a pendulum of suitable weight is used to completely tear the specimen. The difference in the angle from the vertical of the center of gravity of the pendulum between the downswing and upswing is a measure of the energy absorbed in tearing the sample
This angular movement is measured with a digital encoder and is immediately converted to the mean tearing force for a single sheet by the microprocessor and software incorporated in the apparatus.
Standard: BS 4253, ASTM D1424/5734 , DIN 53862, BS EN ISO 13937, ISO1974/9290.
Features:
Works in accordance with all known test standards. RS-232 data output, equipped Tearing Test software Auto specimen notching
Repeatable, pneumatic specimen gripping system guarantees sufficient clamping pressure to avoid all slipping phenomena,
thus ensuring perfect reproducibility of the experimental conditions.
Automatic compensation for friction and leveling errors, no slave pointer, therefore no friction, alignment and maintenance problems.
Unit: N, gf, cN, Cp can be selected.
Specifications:
- Testing range: A hammer: 0~16N B hammer: 0~32N C hammer: 0~64N D hammer: 0~128N
- Testing accuracy:≤±0.2%F·S
- Tearing length:43mm
- Length of automatic cut:20±0.1mm
- Sample size:100×63mm
- Type of sample clamping: pneumatic clamping
- Power source:AC220V50Hz
- External dimension:520×380×700mm
- Weight: 68kg
Packing list of
No. | Name | Qty | Remark |
1 | Tearing Tester | 1 Set | |
2 | Cutting Templates | 1 Pc | For preparing Specimen |
3 | Cutting Knifes | 1 Pc | For preparing Specimen |
4 | Weights | 1 Set | |
5 | Software | 1 | |
6 | Air Compressor | 1 | Optional |
The perspiration tester is to determine color fastness to water, perspiration fastness in textiles
Standards:
Perspiration : AATCC 15 , EN ISO 1 05 E04 , DIN 54020 , JIS L0848 , BS 1006 E04 Water : AATC C 107, EN ISO 105 E01 , DIN 54006 , DIN54005 , JIS L 0846 , BS 10 06 E01
Sea water : AATCC 106 , EN ISO 105 E02 , DIN 54007 , JIS L0847 , BS 1006 E02 Application :
It is to deter mine color fastness test t o water, sea water, perspiration fastness in textiles and sublimation during storage. Perspiration tester consists of a stainless steel frame with 21 acrylic separator plates to hold 20 samples. An electric precise oven is required.
Test Procedure:
Treat the composite sample with synthetic perspiration, sea water or water. Place the perspiration tester with 20 samples which held between plates under a given pressure by standard loading weight into an oven for a requested time at a requested temperature.
Compare the degree of fading and pollution of attached white cloth with gray scale, and appraise the perspiration color fastness
Technical Parameter:
AATCC Count Weight: 3.63kg (8LB)
ISO Count Weight: 4.08 kg (9LB)
Laminate w eight: 0.90kg (2LB)
AATCC acrylic separator plates: (22 Pcs)
ISO acrylic separator plates: (21 Pcs)
Weight: 8 K g
Dimensions: 420mm*15 0mm*300 m m(LxWxH)
The GSM Cutter is for sampling the materials of fabrics and non-fabrics.
The handle is made of aluminum alloy, no broken, Star structure is designed according to the
human touch.
Adopt the high-carbon blade (white); press plate is made of aluminum alloy, not rust, Tight press.
here are 16 stainless steel cross screws on the press plate , make it firm and not slide ,
no rust .
The cutter’s face adopt international advanced T-shaped anti-slip groove structure; minimize the stress in the tangent direction during the cutting and reduce hand fatigue, also ensure that the sample is flat and not slip, a precise cutting .
Adopt the thickness adjustable structure to protect the blade and pad.
It use cork pad, not rubber pad.
Standard: ISO3801, BS2471, ASTM D3776, IWS TM13
Technical Parameter:
Sample area: 100cm2
Max. Cutting thickness: 5mm
External Dimensions: 156×112
Accessories: 2 cutting pads included
4 Extra cutting Blades included (Made in UK)
Jigger Dyeing Machine is suitable to test the dyeing of cotton and linen cloth, viscose, man-made fiber, etc., and suitable for dye material, such as direct dyes, acid dyes, basic dyes, insoluble azo dyes, and reactive dyes, etc. This apparatus can achieve bleaching and dyeing with low-liquor ratio, simulates as nearly as possible the mechanism of production jigs.
Jigger Dyeing Machine is specially designed to satisfy the requirements of testing dye formula before quantity production of dyeing and finishing enterprise. This apparatus simulates as nearly as possible the mechanism of production jigs’ requirements of speed, temperature, pre-tension, etc. of real production process. Compared with production machine, this Laboratory Jig Dyeing Machine’s size is smaller, consumes small quantity of dye, and with short testing process, so operator is easier to change dye formula, and finds suitable dye formula in a short time. Therefore this machine is well welcomed by many dyeing and finishing enterprise
Manual Operation Mode Interface
Technical Parameter:
Control Mode: Touch Screen+ PLC
Effective Roller Width: ≤500mm
Roller Diameter: F 57mm- F 200mm
Cloth speed :0.5-8m/min +/- 0.001 m/min
Temperature Range and accuracy: Room Temperature -98℃+/- 2℃
Temperature Ratio: 1-3 ℃
Tension: 0-18kgs
Material tension control mode: the difference speed between A and B roller.
Cooling: automatic water cold system
Power: AC 380V, 50Hz
The scope of application:
Used in a variety of textiles, non‐ woven fabric, leather and other materials, while force (flexible diaphragm law ) in latitude and longitude and in all directions , expansion force and dilation of the performance measurement .
Related standards: ASTM D3786, ISO 13938.1
Instrument characteristics:
- Use 16bit Industry‐grade MCU (ATMEL, US A), more excellent anti ‐jamming, more excellent stability
- Print t he test reports by built‐in thermal printer
- Dial pressure mete r to show pressure applied to specimen
- Proveded with a touch screen readout of pressure, time of burst,
- height of burst and the peak hold facility
- High quality and renewable rubber diaphragms, manual griping device, and forward reverse and neutralal drive sys tem.
Technical Parameters:
Test Area | φ30 .5±0.05mm (7.3cm2) | ||
Test Area | φ79 .8mm±0.05 mm (50cm2 ) | ||
Capacity | 0~6MPa (6000K pa) | ||
Fluid rate | Adjustable | ||
Bursting strength accuracy | ±0. 5%FS | ||
Hydraulic fluid | glycerin with concentration 85% | ||
Power supply | Ac220V 50Hz/110V, 60Hz | ||
Instrument dimension | 560 ×400×680mm(L×W×H) | ||
weight | 70kg | ||
Packing list of XHF‐16 | |||
No. | Name | Quantity | Remark |
1 | Bursting Strength Tester | 1 | Main body |
2 | Diaphragm | 5 | |
3 | Specimen holders | 1 set | φ30.5± 0.05mm |
4 | Specimen holders | 1 set | φ79.8mm±0.05mm |
4 | Spanner | 1 | Disassemble Holders |
Manual Crock meter is used for testing the fastness to dry or wet rubbing
and the fastness to brushing of all kinds of colored textiles, digital display.
Standards: ISO105-X12, D02, Bs1006 D02, DIN54021, IWS Tm165, JIS K6328. AATCC8/165
Technical Parameter :
Testing times 1-99999
Rubbing travel 104±3mm
Rubbing speed Manual
Rubbing pressure 9N
Rubbing head Roundness :ф 16mm
External Dimensions 620*160* 230mm
Optional Accessories:
AATCC crocking clothes 1Box (1000Pcs)
ISO Grey Scale
AATCC Grey Scale.
APPLICATIONS:
Adjust to the same pick up with bulk production and provide precise pressed dyeing or resin prescription To check the color shade change and to further avoid it happening during resin finishing or heat setting processes after dyeing. Application tests of water repellent, flame retarding and other coating tests special features.
SPECIAL FEATURES:
- Constant nip pressure can be kept due to pneumatic design
- The left or right side pressure of padding roller can be independently adjustable to the required one.
- Easy to operate once you set the required padding nip pressure no other re‐adjustment will be needed.
- Safety devices include a fabric feeder, safety rod, emergency button and a knee pedal to make sure the safe operations at every test.
SPECIFICATION:
- One pair of padding rollers made of N, B, R, rubber material of 70°shore hardness
- Rubber roller diameter 125mmφlength 450 mm
- Driven by 1/4 hp motor with speed reducer (voltage & hertz to be specified)
- Revolving speed is 0‐10m/min (variable frequency speed control)
- Two pressure gauges 0~5kg /cm2
- Two pressure regulating valves (precision 0.1 kg /cm2)
- Air compressor is excluded.
Technical Parameter:
Model | P‐A Vertical type | P‐B Horizontal Type |
Dimensions | 85×56×140CM | 85×56×140CM |
Power | 380‐400 VAC, 50Hz | 380‐400 VAC, 50Hz |
Net Weight: | ~120 KGS | ~120 KGS |
Shipment weight: | ~210 KGS | ~190 KGS |
Shipmen Dimension: | ~100*75*145CM | ~95*75*120CM |
Multipurpose Flammability Tester automatically determine the flammability resistance to a vertical flame of apparel fabrics, protective fabrics, curtains and children’s sleepwear.
Standard: BS EN ISO 6940, EN ISO 6941, BS 5438, EN ISO 15025
Technical Parameter:
Ignition of the time range:0-99.99S
Precision: 0.01S
Continued burning time:0-999.9S
Ignition fire mouth: According to ISO 6941 Standard
Fire Mouth angle: 0°/30°/90°(Adjustable)
Flame Measurement Height: 20mm/40mm
Dimension inside U clamp: 80mmx600mm
Mark line on U clamp: adjustable
Dimension:800mmX550mmX660mm
Weight: 50kgs
Power: AC 220V/110V
Use: Suitable for high temperature (or normal temperature) dyeing, washing, dry-cleaning and samples colorfastness test.
Applied Range:
Suitable f or all kinds of yarn and fabric dyeing experiments, especially for N, N/C, T/N and other kinds of knitted and woven cloth, spandex lake, have better levelness and reproducible.
Features:
With internal heating type silicon carbide heat conduction, to avoid the old infrared machine with heat conduction oil as heat carrier inflammable and explosive fatal flaw.
Use stainless steel infrared heater, compared with the external heating infrared glass lamp life long, long time.
Without glycerin, lampblack pollution; Due to the adopted high-power air cooling system, and therefore there is no loss of cooling water;
Heating power is only 1/3 of the traditional oil heat infrared machine, and heat preservation, constant temperature effect is good, save water, electricity, etc Line costs.
Programmable LCD computer installations, a variety of expressions, real time monitor the working state of the curve of the test process and relevant operation.
Adopts frequency conversion control, adjustable rotary speed, better co operate with the scene of the production process works.
To adapt to different kinds of fabric and dyeing processing, the method of general configuration routine for 24 cups of 300ml.
Technical Parameter:
- Number of steel cup: 24
- Dyed cup material: stainless steel 316 l a stretch forming.
- Cup specification: 300 ml.
- Rotational speed: 0-45 rpm
- Operating temperature : room temperature to 14 0 ℃.
- Temperature control precision:±2℃
- Heating rate: 0.5 – 33 ℃ / min (full cup slightly lower, about 3 ℃ / min)
- Cooling: forced air cooling.
- Heat conduction medium: carborundum.
10 . Power specifications: 110V, 60Hz, Single phase
11 . Dimension : 750mm * 7 75mm * 775 mm (long * deep * high).
12 . Machine weight: about 195 kg.
Rotary Crock Meter to determine the color fastness of textiles to dry and wet rubbing particularly for printer fabrics. Applies 1134g of pressure on a 16mm finger and rotates 1.125 turns clockwise then anti-clockwise. The operating handle is however turn in one direction only.
Standards: AATCC 116; ISO 105 X16
Technical Parameter:
Diameter of rubber head: Diameter of rubbing head: 16±0.1mm
Turning of vertical pole: after turning1.125 circles then reverse
Dimensions: 260×150×210mm
Weight: 5kg
Optional:
AATCC crocking clothes 1Box (1000Pcs)
AATCC grey scale