Pneumatic sample cutter/ Punch cutter

Yarn count machine works with textile electronic balance is a kind of intellectual measuring instrument with weighing, counting and other many functions. The product introduces imported Integrated circuit and enjoys stable and reliable performance, easy operation and accurate weighing and counting. As a kind of measuring instrument, it has been widely used by enterprises and scientific research institutions.

Function:

It has: g,oz,tex,Nm,Ne,D,g/m²kinds of the units to change. Select 1-10 pcs specimen measurement

It can print the date, time, specimen length, each weighing value, calculated MIN (minimum), MAX (maximum), SUM (sum), AV (average), CV% (non-uniform rate). Overload malfunction indication.

 Working Condition:

Working Temperature:                         0°～40°C

Maximum Consumed Power:              3W

Pan Size: Diameter 80mm

Power Supply:     Adaptor    input -220V±10﹪, 50HZ±1HZ。Output- 9v，300mA

Comparative Humidity:    50﹪～85﹪

Range: 210g

Accuracy: 1mg (0.001g)

Standard Configuration: Balance, Printer, Calibration Weight

This Tabletop spectrophotometer  has the advantage of excellent inter-instrument agreement, high accuracy and good replicability.

It could meet your requirement for both color quality control and color matching very easily.

Brief Introduction

1. Transmission D/0 Structure and Reflection D/8 Structure
2. Double Optical Paths Spectral Analysis Technology.

It could get the measurement sample data and internal environment data at the same time to make sure the testing accuracy and

stability for long time running.

3. Compatible with SCI/SCE Measurement.

Adopt D/8 illuminant condition recommended by the CIE to meet the color testing requirement for different industries. It could measure with SCI and SCE to see the color data change more clearly.

4. Four Testing CalibersIt is easy to adjust the testing calibers.The largest caliber diameter reaches 25.4mm. It could test the sample with different sizes.

This is not only suitable for testing the color of opacity sample, but also suitable for transparent or translucent sample’s transmittance and turbidity.

5. Large screen display and Stand-alone operation.It could finish the sample test without connecting with the computer. Large screen display to make sure customer could see the testing result directly and clearly and it will be more convenient to set the instrument status. The color quality management software and color match software are optional according to customer’s need.

6. Unique Calibration Board Design.Fix the calibration board on the testing caliber to make sure the accuracy of the white calibration and guarantee the high accuracy for measurement.
7. Flexible Test Fixture.It could fix the sample with different size and thickness on the testing port tightly in case of stray light entering to affect the testing accuracy.

Technical Data:

Introduction :

 Application scope of XHF-05 Martindale Abrasion & Pilling Tester : suitable for the wear-resistance and grinding test under certain pressure of woven and wool-blend fabrics, Leather, knitted goods and non-woven fabric

 Standards:  ISO5470, IWS TM112/196, DIN53863/53865, BS3424/5690, BS EN 388/530, JIS L1096, ASTM D4966/4970 , ISO17079-2, ISO 12947, ISO17704, ISO 20344, ISO 17076-2, SATRA TM31 and so on.

Features of touch screen Martindale:

 1.Machines with two Lissa-jous trajectory.

 2.Using color touch-screen operation, PLC control, each working position can be controlled separately.

3.  Motor overheat protection, convenient operation.
4.  There is a alarm when the test is finished.
5.  Data can be restored after the power failure.

Technical Parameters:

 Work-station number : 6 or 9 pcs

Counter display : Pre-set counter display: 0-999999

Cumulative counter display: 0-999999

         Abrading table diameter : 120mm

Test pressure (abrasion test)

A:  cloth specimen clamp:198g +/- 2g

B:  textile specimen hammer:395g +/-2g (Equal to 9Kpa)

C: furniture deck specimen hammer:594g +/-2g (Equal to 12Kpa)

Pressure test (pilling test)

A:  cloth specimen clamp:155g +/-1g

B:  textile specimen hammer:260g +/-1g

Weight of Load hammer: 2385g +/-10g

Dimension: 850mm\ x 600mm x 400mm

Weight: Machine 120kgs Accessories box: 22kgs Voltage supply:220V/110V, 50HZ/60Hz

Packing list

Jigger Dyeing Machine is suitable to test the dyeing of cotton and linen cloth, viscose, man-made fiber, etc., and suitable for dye material, such as direct dyes, acid dyes, basic dyes, insoluble azo dyes, and reactive dyes, etc. This apparatus can achieve bleaching and dyeing with low-liquor ratio, simulates as nearly as possible the mechanism of production jigs.

Jigger Dyeing Machine is specially designed to satisfy the requirements of testing dye formula before quantity production of dyeing and finishing enterprise. This apparatus simulates as nearly as possible the mechanism of production jigs’ requirements of speed, temperature, pre-tension, etc. of real production process. Compared with production machine, this Laboratory Jig Dyeing Machine’s size is smaller, consumes small quantity of dye, and with short testing process, so operator is easier to change dye formula, and finds suitable dye formula in a short time. Therefore this machine is well welcomed by many dyeing and finishing enterprise

Manual Operation Mode Interface

 Technical Parameter:

 Control Mode: Touch Screen+ PLC

 Effective Roller Width: ≤500mm

 Roller Diameter:  F 57mm- F 200mm

 Cloth speed :0.5-8m/min +/- 0.001 m/min

 Temperature Range and accuracy: Room Temperature -98℃+/- 2℃

 Temperature Ratio: 1-3 ℃

 Tension: 0-18kgs

Material tension control mode: the difference speed between A and B roller.

 Cooling: automatic water cold system

 Power: AC 380V, 50Hz

Xenon light fastness tester is mainly used for test of the color fastness to light and weather fastness of all kinds of nonferrous, coloring textile; it can also be used for testing the color fastness and ageing of painting, pigment, paint, rubber, plastic, paper and other materials. It has high intelligence, high measurement and control precision, stable performance; and it also has touch screen which is graphic mark displaying, friendly interface, it also easy to operate.

Standard: ISO105-B02/B04/B06 AATCC 16 JIS L0843 ISO 4892-2

Feature:

1. Using 3300W long arc xenon lamp, truly simulate daylight spectrum;
2. Adopt high transmittance filter combination, using 95% of the transmittance of the filter and the filter

    cylinder, to achieve the same irradiance optical requirements of low power consumption,

    makes the instrument more energy saving and environmental protection

4. Automatic compensating system (PATENT) control the Xenon Lamp Power.
5. Large touch screen, indicate the condition of chamber at real-time, be able to presetting irradiance,

     temperature (BPT or BST, chamber), humidity  and plot dynamic curve of them.

5. The operator simply selects the required test module and test standards;
6. 6.  English user interface, diagram indicate condition of chamber, easy to use.
7. 7.PLC control, powerful program and storage property, save the parameters when interrupt of power supply.
8. Custom program capability and storage for additional user-defined tests.
9. 9.Built-in diagnostics and warnings, automatic prompt when lamp or optical filters require changing.
10. 1 Multi-position sensor to supervise working condition, temperature, humidity, fan, xenon lamp, and door to chamber, it makes device work properly and reliably.
11. 1Adopt (PATENT) military transmission technology in order to prevent electronic parts aging because of wireless transmission.
12. A test can be 1000 hours of continuous operation of quality assurance.

Technical Parameter:

 Light source: 3300W air-cooled long-arc xenon lamp Life of lamp: 1000-1500 hours

 Chamber Temperature range: 25 ~ 50 C, accuracy: +/- 2 C

 Blackboard  temperature   range: 30-80 C   Accuracy: +/- 3 C

 Humidity range: 10 ~ 95% RH, accuracy: +/- 5%

 Irradiance: 0.60 ~ 2.01W/m2/420nm (340nm, 300~400nm, 300~800nm is offered on request), Digital set, automatic closed-loop compensation

Control Accuracy of Irradiance: +/- 0.02W/m2/420nm

 Photoperiod: ≤1000h

 Spray cycle: ≤1000h

 Rotation speed of sample holder: revolution 5r/min

 Dimension: 1200 x 800 x 1720mm

 Weight: 213kg

This Button Pull Snap Tester is the unique safety test instrument that provides a means to accurately measure how safe accessories are attached in a product. It is also used to compare a variety of accessories from different vendors in the process from product design to production. It is a simple but effective design mainly consisting of a high precision gauge, a sturdy stand and special grips/clamps. It requires very little train. A sample required by standards & regulations is to be fixed horizontally (constant force is applied to secure the sample) so that snap or other accessories attached in fabric can be clamped into.

It can be used in buttons, zippers, toys testing for many brands like NEXT, M&H, GAP, M&S, NIKE, LIVIS, and other famous brands necessary attachments are available.

.

 Standards:16 CFR 1500.51~53、ASTM F963、EN71-Part 1、M&S P115A., H&M, NEXT etc

Standard package 1-16:
1- Imada Force Gauge FB-30K
2- Upper Stud Grip
3- Upper Grasp Button Grip (Upper Tip-Top Grip)
4- Lower Fabric Clamp
5- Low Grasp Button Accessories Kit
6- Three Pronged Clamp
7- Calibration Weight 15LB
8- Mechanical Stand for Imada Force Gauge
9- Upper Long Nose Vise Grip
10- Upper Universal Grip
11- Button snap attachment
12- Extension rod for lower clamp
13- Allen key for handling fitting (2mm)
14- Protective goggles
15- Supper rubber O rings 5 pcs.
16- Operation Manual