Random Tumble Pilling Tester Touch screen (4 chamber)
Random Tumble Pilling Tester. To determine the pilling and fuzzing characteristics of textile, fabrics. Stainless steel impellers rotate within individually lit aluminum chambers constantly tumbling test fabrics against cork liners for a pre-determined time controlled by a timer andaudible alarm. With 2 or 4 test chambers. Laboratory standard compressed air supply required.
XHF-03C-1 Randum Tumble Pilling Tester-2 test chambers
XHF-03C-2 Randum Tumble Pilling Tester-4 test chambers
Standards: ASTM D3512, DIN 53867, JIS L1076
Technical Parameter :
Rotating speed: 1200rpm
Size of Testing Cylinder: Diameter146mm, Depth:152mm
Sample Dimension: 105mmx105mm
Dimensions: 400x390x515mm (LxWxH), 420x55x570mm(LxWxH)
Weight: 31kg, 65kg
Original Accessories: SDL Cork Liners 50Pcs/Pack
Cotton Silver 1 Yarn
Photographic standards card 5Pcs/Set
$3,337.00
Related Products
Used for testing the fastness to dry or wet rubbing and the fastness to brushing of all kinds of colored textiles, motorized operation, auto stop when counts reach pre-set counts..
Features:
- Adopt linear slide, running more smooth
- Rubbing head always keep horizontal, no matter thickness of specimen,
no adjust position of rubbing head, easier operation.
- Adopt block pressing method, better clamping specimen.
Standards: ISO105-X12, D02, Bs1006 D02, DIN54021, IWS Tm165, JIS K6328. AATCC8/165
Technical Parameter :
| Testing times | 1-99999 |
| Rubbing travel | 104±3mm |
| Rubbing speed | 60r/min |
| Rubbing pressure | 9N |
| Rubbing head | Roundness :ф 16mm |
| External Dimensions | 600mm×225mm×270mm |
| Weight | 12kgs |
| Power | AC 220V, 50Hz |
The washing fastness tester Gyrowash, to determine color fastness to washing or dry cleaning to washing fastness methods, it complies with ISO, BSI, AATCC.
Application:
Washing Fastness Tester, to determine color fastness to washing or dry cleaning to ISO, BSI, AATCC and Marks&Spencers standards.
Available in different sizes such as portable washing fastness tester, etc. The washing fastness tester uses stainless steel rotor to holds washpots on each of four sides and rotates at a constant 40 rpm (+/-2 rpm). Washpots are preheated in appropriate test solution, structure wholly made of very strong stainless steel
Colored touch screen display and PLC control, containers are sealed with either a Neoprene rubber gasket or optional Teflon gasket.
To offer a reliable and safe washing fastness test, Washing fastness tester equipped with water-lacking alarm, protection device when opening door, Test-finished alarm, Automatic shutdown with audible warning etc.
Standard: ISO105 C01-C06, M& SC4A. 5.37. P3B, IWSTM 7.115.177.193.240, 241, AATCC 2, 3, 28, 61, 62, 86, 132, 151, 190, FTMS 191-5610/5622, BS 1006, NEXT
Specifications:
Rotation speed: 40+/-2rpm
Quantity of positions: 6 Pcs 550ml+6Pcs 1200ml
Size of ISO washpot: 550ml 75mm dia x 125mm(3.0 in x 5.0in)
Size of AATCC washpot: 1200ml 90mm diax 200mm(3.5 in x 8.0in)
Temperature : Max 95℃ Adjustable
Running time: Adjustable
Packing list of XHF-13
| No. | Name | Qty | Remarks |
| 1 | Washing Fastness Tester | 1 | Main body |
| 2 | 550ml washpot | 6 | Be Installed on the machine |
| 3 | 1200ml washpot | 6 | Be Installed on the machine |
| 4 | Stainless Steel Balls | 150 | |
| 5 | Stainless Disks | 12 | |
The Durawash test machine simulates the conditions necessary to meet leading chain stores standard garment and fabric durability tests. The process control systems provide excellent accuracy and repeatability. The physical performance of the durawash is compatible with that of the “Hoovermatic” Twin Tub and complies with the Marks and Spencer Fabric Durability (C15) and Print Durability (P5) methods of test.
Fifteen minutes of testing in the Durawash is approximately equivalent to five domestic washes, removing the need for repeated wash and dry tests.
This results in reduced cost, labor and required laboratory space and an increased capacity for testing
Multiple tests can be performed in this one instrument, including print durability, pleat retention, cockling,
flock retention, crinkling, differential shrinkage, security of attachments and more.
Standards: M&S C15 Print Durability, M&S P5 Durability Wash for Garments and Components, M&S P6
Durability Wash for Pleat Retention, M&S P7 Durability of Waddings and Quilted Waddings to Washing,
NEXT TM 8 Appearance for Garments and Products,
BHS TM 12A Durability Wash for Prints and Flock,
BS 7907:2007: Code of Practice for the design and manufacture of children’s clothing to promote mechanical safety
Features:
- Water bath is made of high quality SUS304 stainless steel.
- Protection: water-lacking alarm, protection device when opening door.
- Test-finished alarm.
- Digital Display
Technical Parameter:
- a)Fabric/Garment Capacity: Approx 2kg
- b) Rotation speed: 560 r/min +/-2%
- c)Specimen size: 500mmx500mm
- d) Max temperature: 60 +/- 2 ℃, (Could be adjustable)
- e) Dimension: 700 x 670 x 900mm
- f) Weight: 75kgs
- g) Power: 220V, 50Hz
It is used for the test for drying process and the drying procedures needed by other textiles ,which are prescribed in the standard textiles.
Standard: BS EN ISO 6330-2012, AATCC 135, NEXT standards
Features:
Quality steel with hot coatings as outer shell, and drum is made of stainless steel.
The new impact design ensures silent running and safe operation.
Micro computer control drying temperature, automatic cooling before drying finished.
Digital electricity, hardware control, strong anti-interference ability.
With door open protection.
Drying time can be random selected.
Max loading capacity can reach 15kgs (rated 10kgs).
Technical Parameter:
Type: front-loading, horizontal drum
Rated specimen drying: 10kg
Drying time: room temperature-80℃
Drum diameter: 695mm
Drum depth: 435mm
Drum volume: 165L
Drum speed: 50 r/min
Lifting vanes number: 3 pcs, 120 ° between each one
Power: 220V, 50Hz, 5.5KW
Dimension: 785×960×1365mm
Weight: 100kgs
To determine the color fastness of textiles to dry or wet rubbing.
A pinned acrylic sample holder ensures rapid sample mounting and repeatability of results. Fitted with a pre‐determined electronic counter for strokes up to 9999,
Standards: ISO105‐X12, D02, Bs1006 D02, DIN54021, IWS Tm165, JIS K6328.
Technical Parameter:
Testing Time: 1‐99999
Rubber Travel: 104/100mm (Can be adjust)+/- 3mm
Rubbing Speed: 60r/min
Rubbing pressure: 9N
Rubbing Head: Roundness:φ16mm
Dimension: 600mm x 225mm x 270mm
Weight: 11kgs
Power Source: AC 220V, 50Hz
Accessories:
Rubbing clothing 1 (box)
Sand paper 2 (pcs)
Rings 2 (pcs)
This Fabric shrinkage tester is used for testing the shrinkage and relaxation after washing of various textiles such as cotton, wool, silk, linen, chemical fiber, knitwear, costume etc. It is fit for the factory and testing center with the long-term test.
Standards:ISO-6330-2012, ISO 5077, IWSTM31, BS4923, EN25077/26330, JISL1909, FZ/T70009.
Features :
The apparatus used are for industrial design, suit to the harsh long continuous testing requirements
Suspended inner canister exclusive used, smoothly operation without vibration
Include 12 groups washing programes, users can prepare 6 groups their own shrinkage procedures, and provide programs storage
Variable frequency control technology used, to protect the electrical safety and the smooth operation.
Large touch screen display, figures show clearly
Using high-precision pressure sensors, to ensure that accurate and reliable water level.
Outside and inside fully use stainless steel.
Technical parameters:
| Category | Horizontal roller type, front door feeding mode |
| Inner layer roller | Diameter : 520±1mm |
| Depth: 315±1mm | |
| Inner & outer roller
gap |
2.8cm±0.1cm |
| Lift vane quantity | 3 PCS 120° even distribution |
| Lift vane height | 53mm±1mm |
| Rotation action | Normal: clockwise rotation (12±0.1)S, stop (3±0.1)S |
| anticlockwise rotation (3±0.1)S, stop (12±0.1)S | |
| Soft: clockwise rotation (3±0.1)S, stop (12±0.1)S | |
| anticlockwise rotation (3±0.1)S, stop (12±0.1)S | |
| Rotating speed | Washing time: 52r.p.m |
| Spin : (500±20)r.p.m | |
| Water level control | Low level:10cm , High level:13cm |
| Fill water time | < 2min (water in high level 13cm |
| Drainage duration | < 1min (water in high level 13cm) |
| Setting range to
water temperature |
Room temperature to 99℃ (accuracy: ±1℃) |
| Heating power | 5.4kw |
| Washing capacity | 5kg |
| External Dimensions | 850mm×750mm×1200mm |
| Weight | 140Kg |
| Power source | Three-wire four-phase 380V±10% 50Hz |
Multipurpose Flammability Tester automatically determine the flammability resistance to a vertical flame of apparel fabrics, protective fabrics, curtains and children’s sleepwear.
Standard: BS EN ISO 6940, EN ISO 6941, BS 5438, EN ISO 15025
Technical Parameter:
Ignition of the time range:0-99.99S
Precision: 0.01S
Continued burning time:0-999.9S
Ignition fire mouth: According to ISO 6941 Standard
Fire Mouth angle: 0°/30°/90°(Adjustable)
Flame Measurement Height: 20mm/40mm
Dimension inside U clamp: 80mmx600mm
Mark line on U clamp: adjustable
Dimension:800mmX550mmX660mm
Weight: 50kgs
Power: AC 220V/110V
Yarn count machine works with textile electronic balance is a kind of intellectual measuring instrument with weighing, counting and other many functions. The product introduces imported Integrated circuit and enjoys stable and reliable performance, easy operation and accurate weighing and counting. As a kind of measuring instrument, it has been widely used by enterprises and scientific research institutions.
Function:
It has: g,oz,tex,Nm,Ne,D,g/m2kinds of the units to change. Select 1-10 pcs specimen measurement
It can print the date, time, specimen length, each weighing value, calculated MIN (minimum), MAX (maximum), SUM (sum), AV (average), CV% (non-uniform rate). Overload malfunction indication.
Working Condition:
Working Temperature: 0°～40°C
Maximum Consumed Power: 3W
Pan Size: Diameter 80mm
Power Supply: Adaptor input -220V±10﹪, 50HZ±1HZ。Output- 9v，300mA
Comparative Humidity: 50﹪～85﹪
Range: 210g
Accuracy: 1mg (0.001g)
Standard Configuration: Balance, Printer, Calibration Weight
Jigger Dyeing Machine is suitable to test the dyeing of cotton and linen cloth, viscose, man-made fiber, etc., and suitable for dye material, such as direct dyes, acid dyes, basic dyes, insoluble azo dyes, and reactive dyes, etc. This apparatus can achieve bleaching and dyeing with low-liquor ratio, simulates as nearly as possible the mechanism of production jigs.
Jigger Dyeing Machine is specially designed to satisfy the requirements of testing dye formula before quantity production of dyeing and finishing enterprise. This apparatus simulates as nearly as possible the mechanism of production jigs’ requirements of speed, temperature, pre-tension, etc. of real production process. Compared with production machine, this Laboratory Jig Dyeing Machine’s size is smaller, consumes small quantity of dye, and with short testing process, so operator is easier to change dye formula, and finds suitable dye formula in a short time. Therefore this machine is well welcomed by many dyeing and finishing enterprise
Manual Operation Mode Interface
Technical Parameter:
Control Mode: Touch Screen+ PLC
Effective Roller Width: ≤500mm
Roller Diameter: F 57mm- F 200mm
Cloth speed :0.5-8m/min +/- 0.001 m/min
Temperature Range and accuracy: Room Temperature -98℃+/- 2℃
Temperature Ratio: 1-3 ℃
Tension: 0-18kgs
Material tension control mode: the difference speed between A and B roller.
Cooling: automatic water cold system
Power: AC 380V, 50Hz
Manual Crock meter is used for testing the fastness to dry or wet rubbing
and the fastness to brushing of all kinds of colored textiles, digital display.
Standards: ISO105-X12, D02, Bs1006 D02, DIN54021, IWS Tm165, JIS K6328. AATCC8/165
Technical Parameter :
Testing times 1-99999
Rubbing travel 104±3mm
Rubbing speed Manual
Rubbing pressure 9N
Rubbing head Roundness :ф 16mm
External Dimensions 620*160* 230mm
Optional Accessories:
AATCC crocking clothes 1Box (1000Pcs)
ISO Grey Scale
AATCC Grey Scale.
Used in a variety of textiles, non- woven fabric, leather and other materials, while force ( flexible diaphragm law ) in latitude and longitude and in all directions , expansion force and dilation of the performance measurement .
Integrated safety shied
Provided with a touch screen readout of pressure, time of burst, height of burst
Big touch screen operation, also can use PC operation.
High quality and renewable rubber diaphragms, manual griping device, and forward reverse and neutral drive system
High quality AC servo motor driven
Related standards : ASTM D3786, ISO 13938.1, BS 3424 (PT. 6), ISO 3033-B, EN 12332-2
Features:
Hydraulic pressure to 6000Kpa
Quick change bells
Diaphragm correction
Automatic flow rate adjustment
Software analysis for full results
Distension measurement up to 70mm
Technical Parameters :
Capacity 0~6MPa (6000Kpa)
Test Speed Adjustable, 20-800ml/min
Bursting strength accuracy ±0.5%FS
Hydraulic fluid glycerin with concentration 85%
The scope of application:
It is used for color matching of any product under different lights, it is wide ly applied in Textile, toy, printing, plastic, rubber, chemical, ink, ceramic,
leather, , paints, chemicals, footwear, leather, metal, food, cosmetics multi-industry field.
Meets to major international standards for visual color evaluation including:
ASTM D17 29, ISO3664, DIN, ANSI and BSI.
Features:
- Tube length: 600mm
- Easy to operate by using individual switches for each light source.
- Elapsed time meter for tracking optimal l amp replacement.
- Automatically alternating among light sources.
- No warm-up time or flickering which insures quick and reliable color judgment
- Economic power consumption and low heat generation for high light efficiency
4 Lights
| Model | Name | Pcs | Power | Color Temperature |
| Four Lights
220V, 50Hz |
D65 | 2 | 36W/Piece | 6500K |
| TL84 | 2 | 36W/Piece | 4000K | |
| F/A | 4 | 40W/Piece | 2700K | |
| UV | 1 | 40W/Piece | 365nnm |
5 Lights
| Model | Name | Pcs | Power | Color Temperature |
| Five Lights
220V, 50Hz |
D65 | 2 | 36W/Piece | 6500K |
| TL84 | 2 | 36W/Piece | 4000K | |
| F/A | 4 | 40W/Piece | 2700K | |
| UV | 1 | 40W/Piece | 365nnm | |
| CWF | 2 | 36W/Piece | 4200K |
6 Lights
| Model | Name | Pcs | Power | Color Temperature |
| Six Lights
220V, 50Hz |
D65 | 2 | 36W/Piece | 6500K |
| TL84 | 2 | 36W/Piece | 4000K | |
| F/A | 6 | 40W/Piece | 2700K | |
| UV | 1 | 40W/Piece | 365nnm | |
| CWF | 2 | 36W/Piece | 4200K | |
| U30 | 2 | 36W/Piece | 3000K |
To alter the specification or modify the appearance without notice right is reserved