Textile Bursting Tester 16A

This Tabletop spectrophotometer  has the advantage of excellent inter-instrument agreement, high accuracy and good replicability.

It could meet your requirement for both color quality control and color matching very easily.

Brief Introduction

1. Transmission D/0 Structure and Reflection D/8 Structure
2. Double Optical Paths Spectral Analysis Technology.

It could get the measurement sample data and internal environment data at the same time to make sure the testing accuracy and

stability for long time running.

3. Compatible with SCI/SCE Measurement.

Adopt D/8 illuminant condition recommended by the CIE to meet the color testing requirement for different industries. It could measure with SCI and SCE to see the color data change more clearly.

4. Four Testing CalibersIt is easy to adjust the testing calibers.The largest caliber diameter reaches 25.4mm. It could test the sample with different sizes.

This is not only suitable for testing the color of opacity sample, but also suitable for transparent or translucent sample’s transmittance and turbidity.

5. Large screen display and Stand-alone operation.It could finish the sample test without connecting with the computer. Large screen display to make sure customer could see the testing result directly and clearly and it will be more convenient to set the instrument status. The color quality management software and color match software are optional according to customer’s need.

6. Unique Calibration Board Design.Fix the calibration board on the testing caliber to make sure the accuracy of the white calibration and guarantee the high accuracy for measurement.
7. Flexible Test Fixture.It could fix the sample with different size and thickness on the testing port tightly in case of stray light entering to affect the testing accuracy.

Technical Data:

Xenon light fastness tester is mainly used for test of the color fastness to light and weather fastness of all kinds of nonferrous, coloring textile; it can also be used for testing the color fastness and ageing of painting, pigment, paint, rubber, plastic, paper and other materials. It has high intelligence, high measurement and control precision, stable performance; and it also has touch screen which is graphic mark displaying, friendly interface, it also easy to operate.

Standard: ISO105-B02/B04/B06 AATCC 16 JIS L0843 ISO 4892-2

Feature:

1. Using 3300W long arc xenon lamp, truly simulate daylight spectrum;
2. Adopt high transmittance filter combination, using 95% of the transmittance of the filter and the filter

    cylinder, to achieve the same irradiance optical requirements of low power consumption,

    makes the instrument more energy saving and environmental protection

4. Automatic compensating system (PATENT) control the Xenon Lamp Power.
5. Large touch screen, indicate the condition of chamber at real-time, be able to presetting irradiance,

     temperature (BPT or BST, chamber), humidity  and plot dynamic curve of them.

5. The operator simply selects the required test module and test standards;
6. 6.  English user interface, diagram indicate condition of chamber, easy to use.
7. 7.PLC control, powerful program and storage property, save the parameters when interrupt of power supply.
8. Custom program capability and storage for additional user-defined tests.
9. 9.Built-in diagnostics and warnings, automatic prompt when lamp or optical filters require changing.
10. 1 Multi-position sensor to supervise working condition, temperature, humidity, fan, xenon lamp, and door to chamber, it makes device work properly and reliably.
11. 1Adopt (PATENT) military transmission technology in order to prevent electronic parts aging because of wireless transmission.
12. A test can be 1000 hours of continuous operation of quality assurance.

Technical Parameter:

 Light source: 3300W air-cooled long-arc xenon lamp Life of lamp: 1000-1500 hours

 Chamber Temperature range: 25 ~ 50 C, accuracy: +/- 2 C

 Blackboard  temperature   range: 30-80 C   Accuracy: +/- 3 C

 Humidity range: 10 ~ 95% RH, accuracy: +/- 5%

 Irradiance: 0.60 ~ 2.01W/m2/420nm (340nm, 300~400nm, 300~800nm is offered on request), Digital set, automatic closed-loop compensation

Control Accuracy of Irradiance: +/- 0.02W/m2/420nm

 Photoperiod: ≤1000h

 Spray cycle: ≤1000h

 Rotation speed of sample holder: revolution 5r/min

 Dimension: 1200 x 800 x 1720mm

 Weight: 213kg

This Button Pull Snap Tester is the unique safety test instrument that provides a means to accurately measure how safe accessories are attached in a product. It is also used to compare a variety of accessories from different vendors in the process from product design to production. It is a simple but effective design mainly consisting of a high precision gauge, a sturdy stand and special grips/clamps. It requires very little train. A sample required by standards & regulations is to be fixed horizontally (constant force is applied to secure the sample) so that snap or other accessories attached in fabric can be clamped into.

It can be used in buttons, zippers, toys testing for many brands like NEXT, M&H, GAP, M&S, NIKE, LIVIS, and other famous brands necessary attachments are available.

.

 Standards:16 CFR 1500.51~53、ASTM F963、EN71-Part 1、M&S P115A., H&M, NEXT etc

Standard package 1-16:
1- Imada Force Gauge FB-30K
2- Upper Stud Grip
3- Upper Grasp Button Grip (Upper Tip-Top Grip)
4- Lower Fabric Clamp
5- Low Grasp Button Accessories Kit
6- Three Pronged Clamp
7- Calibration Weight 15LB
8- Mechanical Stand for Imada Force Gauge
9- Upper Long Nose Vise Grip
10- Upper Universal Grip
11- Button snap attachment
12- Extension rod for lower clamp
13- Allen key for handling fitting (2mm)
14- Protective goggles
15- Supper rubber O rings 5 pcs.
16- Operation Manual

The washing fastness tester Gyrowash, to determine color fastness to washing or dry cleaning to washing fastness methods, it complies with ISO, BSI, AATCC.

Application:

Washing Fastness Tester, to determine color fastness to washing or dry cleaning to ISO, BSI, AATCC and Marks&Spencers standards.

Available in different sizes such as portable washing fastness tester, etc. The washing fastness tester uses stainless steel rotor to holds washpots on each of four sides and rotates at a constant 40 rpm (+/-2 rpm). Washpots are preheated in appropriate test solution, structure wholly made of very strong stainless steel

Colored touch screen display and PLC control, containers are sealed with either a Neoprene rubber gasket or optional Teflon gasket.

To offer a reliable and safe washing fastness test, Washing fastness tester equipped with water-lacking alarm, protection device when opening door, Test-finished alarm, Automatic shutdown with audible warning etc.

Standard: ISO105 C01-C06, M& SC4A. 5.37. P3B, IWSTM 7.115.177.193.240, 241, AATCC 2, 3, 28, 61, 62, 86, 132, 151, 190, FTMS 191-5610/5622, BS 1006, NEXT

Specifications:

Rotation speed: 40+/-2rpm

Quantity of positions: 6 Pcs 550ml+6Pcs 1200ml

Size of ISO washpot: 550ml   75mm dia x 125mm(3.0 in x 5.0in)

Size of AATCC washpot: 1200ml 90mm diax 200mm(3.5 in x 8.0in)

Temperature : Max 95℃   Adjustable

Running time: Adjustable        

Packing list of XHF-13

The Durawash test machine simulates the conditions necessary to meet leading chain stores standard garment and fabric durability tests. The process control systems provide excellent accuracy and repeatability. The physical performance of the durawash is compatible with that of the “Hoovermatic” Twin Tub and complies with the Marks and Spencer Fabric Durability (C15) and Print Durability (P5) methods of test.

Fifteen minutes of testing in the Durawash is approximately equivalent to five domestic washes, removing the need for repeated wash and dry tests.

This results in reduced cost, labor and required laboratory space and an increased capacity for testing

Multiple tests can be performed in this one instrument, including print durability, pleat retention, cockling,

flock retention, crinkling, differential shrinkage, security of attachments and more.

Standards:  M&S C15 Print Durability, M&S P5 Durability Wash for Garments and Components, M&S P6

Durability Wash for Pleat Retention, M&S P7 Durability of Waddings and Quilted Waddings to Washing,

NEXT TM 8 Appearance for Garments and Products,

BHS TM 12A Durability Wash for Prints and Flock,

BS 7907:2007: Code of Practice for the design and manufacture of children’s clothing to promote mechanical safety

Features:

4. Water bath is made of high quality SUS304 stainless steel.
5. Protection: water-lacking alarm, protection device when opening door.
6. Test-finished alarm.
7. Digital Display

Technical Parameter:

1. a)Fabric/Garment Capacity: Approx 2kg
2. b) Rotation speed: 560 r/min +/-2%
3. c)Specimen size: 500mmx500mm
4. d) Max temperature: 60  +/- 2 ℃, (Could be adjustable)
5. e) Dimension: 700 x 670 x 900mm
6. f) Weight: 75kgs
7. g) Power: 220V, 50Hz

This machine is suitable for dyeing in common temperature (20℃-100℃)

and the operation is simple. Neutral alkali, salt and other additions can be softly added during the process of dyeing.

It also applies to the cotton bath, soap and bleached experiment

Features:

Equip imported motor with large Angular moment from Taiwan.

The shell is made of stainless steel S.S304 material

Programmable Temperature controller and PT-100 probe

  Technical Parameter:
Number of Beaker: (24Cups)
Beaker Specification: 250cc Triangular Glass Beaker
Oscillation Speed: 30-200 reciprocation/min

  (shaking from right to left)
Temperature Range: Room Temperature – 100℃
Heating: Electrical Heating
Power Supply: 4kw, AC220V, 50HZ
Overall Dimension (L*W*H): 106*55*72c m
Included: 250cc Triangular glass Beaker