Textile Bursting Tester 16C

Yarn count machine works with textile electronic balance is a kind of intellectual measuring instrument with weighing, counting and other many functions. The product introduces imported Integrated circuit and enjoys stable and reliable performance, easy operation and accurate weighing and counting. As a kind of measuring instrument, it has been widely used by enterprises and scientific research institutions.

Function:

It has: g,oz,tex,Nm,Ne,D,g/m²kinds of the units to change. Select 1-10 pcs specimen measurement

It can print the date, time, specimen length, each weighing value, calculated MIN (minimum), MAX (maximum), SUM (sum), AV (average), CV% (non-uniform rate). Overload malfunction indication.

 Working Condition:

Working Temperature:                         0°～40°C

Maximum Consumed Power:              3W

Pan Size: Diameter 80mm

Power Supply:     Adaptor    input -220V±10﹪, 50HZ±1HZ。Output- 9v，300mA

Comparative Humidity:    50﹪～85﹪

Range: 210g

Accuracy: 1mg (0.001g)

Standard Configuration: Balance, Printer, Calibration Weight

Used for testing the fastness to dry or wet rubbing and the fastness to brushing of all kinds of colored textiles, motorized operation, auto stop when counts reach pre-set counts..

Features:

1. Adopt linear slide, running more smooth
2. Rubbing head always keep horizontal, no matter thickness of specimen,

no adjust position of rubbing head, easier operation.

3. Adopt block pressing method, better clamping specimen.

 Standards: ISO105-X12, D02, Bs1006 D02, DIN54021, IWS Tm165, JIS K6328. AATCC8/165

Technical Parameter :

Use: Suitable for high temperature (or normal temperature) dyeing, washing, dry-cleaning and samples colorfastness test.

Applied Range:

Suitable f or all kinds of yarn and fabric dyeing experiments, especially for N, N/C, T/N and other kinds of knitted and woven cloth, spandex lake, have better levelness and reproducible.

Features:

With internal heating type silicon carbide heat conduction, to avoid the old infrared machine with heat conduction oil as heat carrier inflammable and explosive fatal flaw.

Use stainless steel infrared heater, compared with the external heating infrared glass lamp life long, long time.

Without glycerin, lampblack pollution; Due to the adopted high-power air cooling system, and therefore there is no loss of cooling water;

Heating power is only 1/3 of the traditional oil heat infrared machine, and heat preservation, constant temperature effect is good, save water, electricity, etc Line costs.

Programmable LCD computer installations, a variety of expressions, real time monitor the working state of the curve of the test process and relevant operation.

Adopts frequency conversion control, adjustable rotary speed, better co operate with the scene of the production process works.

To adapt to different kinds of fabric and dyeing processing, the method of general configuration routine for 24 cups of 300ml.

Technical Parameter:

1. Number of steel cup: 24

2. Dyed cup material: stainless steel 316 l a stretch forming.

3. Cup specification: 300 ml.

4. Rotational speed: 0-45 rpm

5. Operating temperature : room temperature to 14 0 ℃.

6. Temperature control precision:±2℃

7. Heating rate: 0.5 – 33 ℃ / min (full cup slightly lower, about 3 ℃ / min)

8. Cooling: forced air cooling.

9. Heat conduction medium: carborundum.

10 . Power specifications: 110V, 60Hz, Single phase

11 . Dimension : 750mm * 7 75mm * 775 mm (long * deep * high).

12 . Machine weight: about 195 kg.

Fabric Thickness tester is applicable of measuring the thickness o f tissue pap er, woven, knitted fabric s, non- woven and o ther uniform materials. It is designed according to

Standards: ISO5084 ,FZ/T6000 4, ISO9073, ISO 98 63….etc.

Technical Para meter :

 Thickness measuring range : 0-25mm

Min. graduation value : 0.001 mm

Press foot diameter: 11.28mm , 50.48 mm, 56.42 mm, 112.84 mm

Press er foot area : 100, 2000, 2500, 1000 0(mm2)

Weighing poise :   5cN*1, 10cN*2, 50cN*2, 100cN*1,4 00cN*1,1000 cN*1 (combine)

Press time: 10s,30s

Test speed: when press time is 10s, about 2.1 times/minutes; when press time is

30s, 1.2 times/minutes.

Weight : 30kg

External Dimensions : 210x450x400mm

Power source : A C220V±10% 50Hz

Used in a variety of textiles, non- woven fabric, leather and other materials, while force ( flexible diaphragm law ) in latitude and longitude and in all directions , expansion force and dilation of the performance measurement .

Integrated safety shied
Provided with a touch screen readout of pressure, time of burst, height of burst

Big touch screen operation, also can use PC operation.
High quality and renewable rubber diaphragms, manual griping device, and forward reverse and neutral drive system
High quality AC servo motor driven

Related standards : ASTM D3786, ISO 13938.1, BS 3424 (PT. 6), ISO 3033-B, EN 12332-2

Features:
Hydraulic pressure to 6000Kpa
Quick change bells
Diaphragm correction
Automatic flow rate adjustment
Software analysis for full results
Distension measurement up to 70mm

Technical Parameters :
Capacity 0~6MPa (6000Kpa)
Test Speed Adjustable, 20-800ml/min
Bursting strength accuracy ±0.5%FS
Hydraulic fluid glycerin with concentration 85%

Xenon light fastness tester is mainly used for test of the color fastness to light and weather fastness of all kinds of nonferrous, coloring textile; it can also be used for testing the color fastness and ageing of painting, pigment, paint, rubber, plastic, paper and other materials. It has high intelligence, high measurement and control precision, stable performance; and it also has touch screen which is graphic mark displaying, friendly interface, it also easy to operate.

Standard: ISO105-B02/B04/B06 AATCC 16 JIS L0843 ISO 4892-2

Feature:

1. Using 3300W long arc xenon lamp, truly simulate daylight spectrum;
2. Adopt high transmittance filter combination, using 95% of the transmittance of the filter and the filter

    cylinder, to achieve the same irradiance optical requirements of low power consumption,

    makes the instrument more energy saving and environmental protection

4. Automatic compensating system (PATENT) control the Xenon Lamp Power.
5. Large touch screen, indicate the condition of chamber at real-time, be able to presetting irradiance,

     temperature (BPT or BST, chamber), humidity  and plot dynamic curve of them.

5. The operator simply selects the required test module and test standards;
6. 6.  English user interface, diagram indicate condition of chamber, easy to use.
7. 7.PLC control, powerful program and storage property, save the parameters when interrupt of power supply.
8. Custom program capability and storage for additional user-defined tests.
9. 9.Built-in diagnostics and warnings, automatic prompt when lamp or optical filters require changing.
10. 1 Multi-position sensor to supervise working condition, temperature, humidity, fan, xenon lamp, and door to chamber, it makes device work properly and reliably.
11. 1Adopt (PATENT) military transmission technology in order to prevent electronic parts aging because of wireless transmission.
12. A test can be 1000 hours of continuous operation of quality assurance.

Technical Parameter:

 Light source: 3300W air-cooled long-arc xenon lamp Life of lamp: 1000-1500 hours

 Chamber Temperature range: 25 ~ 50 C, accuracy: +/- 2 C

 Blackboard  temperature   range: 30-80 C   Accuracy: +/- 3 C

 Humidity range: 10 ~ 95% RH, accuracy: +/- 5%

 Irradiance: 0.60 ~ 2.01W/m2/420nm (340nm, 300~400nm, 300~800nm is offered on request), Digital set, automatic closed-loop compensation

Control Accuracy of Irradiance: +/- 0.02W/m2/420nm

 Photoperiod: ≤1000h

 Spray cycle: ≤1000h

 Rotation speed of sample holder: revolution 5r/min

 Dimension: 1200 x 800 x 1720mm

 Weight: 213kg