Vertical Tent Flame chamber
The Vertical Fabric flammability tester is used for testing trend of after flame, flame retardant and carbonization of camping tentage.. It is automatically determine the flammability resistance to a vertical flame of camping tentage.
Characteristics:
1 . Use PLC touch screen control
- Electric automatically burner, light clocking set freely from 0-999.9s.
- Burning chamber is stainless steel.
- Flame height can be adjusted
- Automatically burner orientation
Standards: CPAI 84 Flammability Test Method Wall and Top Material
| Technical Parameters : | ||
| Vent Holes | Top 16 pcs, Two sides, each 6 pcs, diameter: 13mm | |
| Time range and accuracy | 0.0-999.9S, resolution 0.1S (adjustable) | |
| Burner | Inner diameter: 5mm, barrel: 75mm | |
| Distance between burner and | 20mm | |
| specimen | ||
| Flame Height | 38mm (adjustable) | |
| Ignition time in test | 12S (adjustable) | |
| Specimen Size | 300x70mm | |
| Inner dimension of clamp | 360x50mm | |
| Load weights | 50g, 100g, 200g, 350g | |
| Dimensions | 600 x 400x850mm | |
| Weight | 35kg | |
| Power source | 110V/220V, 50Hz/60Hz | |
$2,525.00
Related Products
This machine is suitable for dyeing in common temperature (20℃-100℃)
and the operation is simple. Neutral alkali, salt and other additions can be softly added during the process of dyeing.
It also applies to the cotton bath, soap and bleached experiment
Features:
Equip imported motor with large Angular moment from Taiwan.
The shell is made of stainless steel S.S304 material
Programmable Temperature controller and PT-100 probe
Technical Parameter:
Number of Beaker: (24Cups)
Beaker Specification: 250cc Triangular Glass Beaker
Oscillation Speed: 30-200 reciprocation/min
(shaking from right to left)
Temperature Range: Room Temperature – 100℃
Heating: Electrical Heating
Power Supply: 4kw, AC220V, 50HZ
Overall Dimension (L*W*H): 106*55*72c m
Included: 250cc Triangular glass Beaker
Introduction :
Application scope of XHF-05 Martindale Abrasion & Pilling Tester : suitable for the wear-resistance and grinding test under certain pressure of woven and wool-blend fabrics, Leather, knitted goods and non-woven fabric
Standards: ISO5470, IWS TM112/196, DIN53863/53865, BS3424/5690, BS EN 388/530, JIS L1096, ASTM D4966/4970 , ISO17079-2, ISO 12947, ISO17704, ISO 20344, ISO 17076-2, SATRA TM31 and so on.
Features of touch screen Martindale:
1.Machines with two Lissa-jous trajectory.
2.Using color touch-screen operation, PLC control, each working position can be controlled separately.
- Motor overheat protection, convenient operation.
- There is a alarm when the test is finished.
- Data can be restored after the power failure.
Technical Parameters:
Work-station number : 6 or 9 pcs
Counter display : Pre-set counter display: 0-999999
Cumulative counter display: 0-999999
Abrading table diameter : 120mm
Test pressure (abrasion test)
A: cloth specimen clamp:198g +/- 2g
B: textile specimen hammer:395g +/-2g (Equal to 9Kpa)
C: furniture deck specimen hammer:594g +/-2g (Equal to 12Kpa)
Pressure test (pilling test)
A: cloth specimen clamp:155g +/-1g
B: textile specimen hammer:260g +/-1g
Weight of Load hammer: 2385g +/-10g
Dimension: 850mm\ x 600mm x 400mm
Weight: Machine 120kgs Accessories box: 22kgs Voltage supply:220V/110V, 50HZ/60Hz
Packing list
| No. | Name | Quantity | Remark |
| 1 | Abrasion tester | 1 | Main body |
| 2 | Pin Shaft | 6 or 9 | |
| 3 | Hammer | 1 | |
| 4 | Lissa-jous trace pen | 1 | |
| 5 | Dia 140 sample cutter | 1 | |
| 6 | Dia 38 sample cutter | 1 | |
| 7 | Dia 90 sample cutter | 1 | |
| 8 | Weights | 12 or 18 | 395g, 594g each 6 pcs |
| 9 | Specimen clamps | 12 or 18 | dia38mm, dia90mm each 6 pcs |
| 10 | Abrasion table | 6 or 9 | |
| 11 | Specimen fix ring | 6 or 9 | |
| 12 | Rubber rings | 12 or 18 | For installing dia90mm specimen |
| 14 | Load disc | 6 or 9 | |
| 15 | Accessories Case | 2 | Aluminum-Alloy Case |
Fabric Thickness tester is applicable of measuring the thickness o f tissue pap er, woven, knitted fabric s, non- woven and o ther uniform materials. It is designed according to
Standards: ISO5084 ,FZ/T6000 4, ISO9073, ISO 98 63….etc.
Technical Para meter :
Thickness measuring range : 0-25mm
Min. graduation value : 0.001 mm
Press foot diameter: 11.28mm , 50.48 mm, 56.42 mm, 112.84 mm
Press er foot area : 100, 2000, 2500, 1000 0(mm2)
Weighing poise : 5cN*1, 10cN*2, 50cN*2, 100cN*1,4 00cN*1,1000 cN*1 (combine)
Press time: 10s,30s
Test speed: when press time is 10s, about 2.1 times/minutes; when press time is
30s, 1.2 times/minutes.
Weight : 30kg
External Dimensions : 210x450x400mm
Power source : A C220V±10% 50Hz
Automatic Fabric Air Permeability Tester is used to test the air permeability of various woven fabrics, knitted fabrics, non-woven fabrics, industrial filter materials etc
Standards:
ASTM D737, ASTM D3574, AFNORG07-111, BS5636, DIN53,887,EDANA140.1, EN IS07,231, ENISO9,237, JIS L1096-A, TAPPI T251 and so on.
S Model: Manual replacement of the Orifice plate.
A Model: Automatic replacement of the Orifice plate.
- More excellent anti-jamming, more excellent stability, more rapid data transference speed.
- Adopt microcomputer control system, branded high accuracy pressure sensor, digital feedback and adjust air volume.
- Automatic orifice plate replacement, no manual replacement .
4.Automatic orifice plate replacement, no manual replacement
- Automatic follow, measure and display pressure difference of each point with high stability and repeatability.
- All plates have been calibrated by-point in full testing range to let test data more accuracy.
- All test data is displayed by large high-definition large color touch screen displayer, no need to calculate test result by hands.
- Automatic converse air permeability rate and air permeability volume to improve test efficiency.
- Large touch screen displayer and controller.
- Adopt micro-computer control, insure the test data accuracy and test data can be saved and processed automatically.
- Special designed sample holder accomplish test in box and ensure the yarn without slip.
- Equipped with the inner printer, test report can be printed anywhere.
- Testing procedure can be set conveniently by the inner control panel.
- 14 With the function of saving data when power-down.
- Professional software support to output results to PC.
Technical Parameters:
- Working pattern: high precision imported pressure sensor, touch screen control, printing and testing report
- Pressure volume : 50-500Pa
- Specimen thickness: ≤12mm
4 .Measuring accuracy : ≤±2%
- Test area/diameter: 20 cm2, 38 cm2 Optional : 50 cm2,100cm2, 5 cm2, φ50mm
- Units: Total 8 Units to can be freely switched: mm/s, L/m2/s, L/dm2/min, cm3/cm2/s, ft3/ft2/min, m3/m2/min, m3/m2/h, dm3/s
- Orifice plate: 8 Pcs ( Φ0.5mm, Φ1.0mm, Φ1.5mm, Φ2.5mm, Φ4.5mm, Φ8.0mm, Φ14.5mm, Φ26mm)
- Calibration : unique calibration board
- Permeability ratio range: 0.2-11000mm/s (L/m2.S)
- External Dimensions: 700x1000x1000mm
- Gross Weight: 100kg
- Power source: 220V±10% 50HZ
To alter the specification or modify the appearance without notice right is reserved
The perspiration tester is to determine color fastness to water, perspiration fastness in textiles
Standards:
Perspiration : AATCC 15 , EN ISO 1 05 E04 , DIN 54020 , JIS L0848 , BS 1006 E04 Water : AATC C 107, EN ISO 105 E01 , DIN 54006 , DIN54005 , JIS L 0846 , BS 10 06 E01
Sea water : AATCC 106 , EN ISO 105 E02 , DIN 54007 , JIS L0847 , BS 1006 E02 Application :
It is to deter mine color fastness test t o water, sea water, perspiration fastness in textiles and sublimation during storage. Perspiration tester consists of a stainless steel frame with 21 acrylic separator plates to hold 20 samples. An electric precise oven is required.
Test Procedure:
Treat the composite sample with synthetic perspiration, sea water or water. Place the perspiration tester with 20 samples which held between plates under a given pressure by standard loading weight into an oven for a requested time at a requested temperature.
Compare the degree of fading and pollution of attached white cloth with gray scale, and appraise the perspiration color fastness
Technical Parameter:
AATCC Count Weight: 3.63kg (8LB)
ISO Count Weight: 4.08 kg (9LB)
Laminate w eight: 0.90kg (2LB)
AATCC acrylic separator plates: (22 Pcs)
ISO acrylic separator plates: (21 Pcs)
Weight: 8 K g
Dimensions: 420mm*15 0mm*300 m m(LxWxH)
The Launderometer (washing fastness tester, called different names as (Gyrowash, Rotawash, Dynowash), to determine color fastness to washing or dry cleaning to washing fastness methods, it complies with ISO, BSI, AATCC and Marks& Spencer standards.
Feature:
Available in different sizes such as portable washing fastness tester, etc. The washing fastness tester uses stainless steel rotor to holds washpots on each of four sides and rotates at a constant 40 rpm (+/-2 rpm). Washpots are preheated in appropriate test solution, structure wholly made of very strong stainless steel.
Color touch screen display and PLC control, containers are sealed with either a Neoprene rubber gasket or optional Teflon gasket.
Small and large test vessels are interchangeable so they can be placed in every position.
This allows operators to test to both ISO (European) and AATCC (American) Standards with ease.
To offer a reliable and safe washing fastness test, Washing fastness tester equipped with water-lacking alarm, protection device when opening door, Test-finished alarm, Automatic shutdown with audible warning etc, electric drainage function is optional.
Standard: ISO105 C01-C06, M& SC4A. 5.37. P3B, IWSTM 7.115.177.193.240, 241, AATCC 2, 3, 28, 61, 62, 86, 132, 151, 190, FTMS 191-5610/5622, BS 1006, NEXT
Technical Parameter:
Rotation speed: 40+/-2/rpm
Quantity of positions: 8, 12, 16, 20 depend on customer’s request
Size of ISO washpot: 550ml 75mm dia x 125mm(3.0 in x 5.0in)
Size of AATCC washpot: 1200ml 90mm diax 200mm(3.5 in x 8.0in)
Temperature : Max 95℃ Adjustable
Running time: Adjustable
PACKING LIST:
| No. | Name | Quantity | Remark | |
| 1 | Washing Fastness Tester | 1 set | Main body | |
| 2 | 550ml Container+Vessles | 1 Set | Optional | |
| 3 | 1200ml Container+ Vessels | Optional | ||
| 4 | Stainless Steel Balls | 50 | Pcs | For each pot |
| 5 | Stainless Steel Discs | 1 | Pc | For each pot |
| 6. | Electric Drainage Function | 1 | Pc | Optional |
The scope of application:
Used in a variety of textiles, non‐ woven fabric, leather and other materials, while force (flexible diaphragm law ) in latitude and longitude and in all directions , expansion force and dilation of the performance measurement .
Related standards: ASTM D3786, ISO 13938.1
Instrument characteristics:
- Use 16bit Industry‐grade MCU (ATMEL, US A), more excellent anti ‐jamming, more excellent stability
- Print t he test reports by built‐in thermal printer
- Dial pressure mete r to show pressure applied to specimen
- Proveded with a touch screen readout of pressure, time of burst,
- height of burst and the peak hold facility
- High quality and renewable rubber diaphragms, manual griping device, and forward reverse and neutralal drive sys tem.
Technical Parameters:
| Test Area | φ30 .5±0.05mm (7.3cm2) | ||
| Test Area | φ79 .8mm±0.05 mm (50cm2 ) | ||
| Capacity | 0~6MPa (6000K pa) | ||
| Fluid rate | Adjustable | ||
| Bursting strength accuracy | ±0. 5%FS | ||
| Hydraulic fluid | glycerin with concentration 85% | ||
| Power supply | Ac220V 50Hz/110V, 60Hz | ||
| Instrument dimension | 560 ×400×680mm(L×W×H) | ||
| weight | 70kg | ||
| Packing list of XHF‐16 | |||
| No. | Name | Quantity | Remark |
| 1 | Bursting Strength Tester | 1 | Main body |
| 2 | Diaphragm | 5 | |
| 3 | Specimen holders | 1 set | φ30.5± 0.05mm |
| 4 | Specimen holders | 1 set | φ79.8mm±0.05mm |
| 4 | Spanner | 1 | Disassemble Holders |
This Tabletop spectrophotometer has the advantage of excellent inter-instrument agreement, high accuracy and good replicability.
It could meet your requirement for both color quality control and color matching very easily.
Brief Introduction
- Transmission D/0 Structure and Reflection D/8 Structure
- Double Optical Paths Spectral Analysis Technology.
It could get the measurement sample data and internal environment data at the same time to make sure the testing accuracy and
stability for long time running.
- Compatible with SCI/SCE Measurement.
Adopt D/8 illuminant condition recommended by the CIE to meet the color testing requirement for different industries. It could measure with SCI and SCE to see the color data change more clearly.
- Four Testing CalibersIt is easy to adjust the testing calibers.The largest caliber diameter reaches 25.4mm. It could test the sample with different sizes.
This is not only suitable for testing the color of opacity sample, but also suitable for transparent or translucent sample’s transmittance and turbidity.
- Large screen display and Stand-alone operation.It could finish the sample test without connecting with the computer. Large screen display to make sure customer could see the testing result directly and clearly and it will be more convenient to set the instrument status. The color quality management software and color match software are optional according to customer’s need.
- Unique Calibration Board Design.Fix the calibration board on the testing caliber to make sure the accuracy of the white calibration and guarantee the high accuracy for measurement.
- Flexible Test Fixture.It could fix the sample with different size and thickness on the testing port tightly in case of stray light entering to affect the testing accuracy.
Technical Data:
| Type | XHF-CS-820 | |
| Measurement Condition | Reflection: d/8(Diffused lighting, 8 degrees receiving) Compatible with SCI/SCE Measurement ISO7724/1、DIN5033 Teil7、JIS Z8722 condition C、CIE No.15、ASTM E1164）Transmission d/0(Diffused lighting, Vertical direction receiving) | |
| Size of integrating sphere | Φ15.2cm, Alvan diffused reflection surface coating | |
| Illumination Light source | CLEDs(entire wavelength balanced LED light source） | |
| Sensor | dual light path sensor array | |
| Wavelength range | 400-700nm | |
| Wavelength interval | 10nm | |
| Half spectral width | 5nm |
| Reflectivity range | 0-200% | |
| Reflectivity resolution | 0.01% | |
| Observation angle | 2°/10° | |
| Measurement light source | A,C,D50,D55,D65,D75,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12
CWF,U30,DLF,NBF,TL83,TL84 |
|
| Data being displayed | SPD distribution/data, sample’s color values, color difference Values / graph, pass/fail results, color error tendency, history data color
simulation, manual input standard sample, generate measurement report |
|
| Measurement time interval | 2 seconds | |
| Large Aperture (LAV):2.54cm (=1inch) | ||
| Reflection Aperture | Medium Aperture (MAV):1.5cm(=0.6inch) | |
| Small Aperture (SAV):0.75cmx1.0cm(0.3inch x 0.4inch) | ||
| Very Small Aperture (VSAV):0.3cmx0.8cm(0.12inch x 0.31inch) | ||
| Color space | CIE-L*a*b,L*C*h,CIE-L*u*v,XYZ,Yxy,Transmittance, Hunterlab, | |
| Munsell MI,CMYK, RGB，HSB | ||
| Color difference formulas | ΔE*ab,ΔE*CH,ΔE*uv,ΔE*cmc(2:1),ΔE*cmc(1:1),ΔE*94,ΔE*00 | |
| ΔEab(Hunter),555color classification | ||
| Other colorimetric indices | WI(ASTM E313-10,ASTM E313-73,CIE/ISO, AATCC, Hunter, Taube
Berger, Ganz, Stensby),YI(ASTM D1925，ASTM E313-00,ASTM E313-73),Tint(ASTM E313-00,CIE,Ganz),Metamerism index Milm, Stick color fastness, Color fastness, APHA, Pt-Co, Gardner |
|
| Repeatability | light splitting reflectivity: standard deviation within 0.08% color values: ΔE*ab<=0.015(After calibration, standard deviation of 30 measurements on test white board, 5 second intervals, Maximum: 0.03 | |
| Interface | USB | |
| Data storage | mass storage | |
| Light source longevity | 5 years, 1.5 million tests | |
| Size | 583*330*304mm(L*W*H) | |
| Work temperature range | 15℃-32℃ (60°F-90°F) | |
| Relative Humidity | 0℃ to 45℃，relative humidity 80% or below at 35°C, no condensation | |
| Standard accessories | AC power line, color management software, drive software, USB
cable, black/white calibration tube, 40*10 cuvette, cuvette support, testing report |
|
| Optional | 40×40 cuvette | |
Manual Crock meter is used for testing the fastness to dry or wet rubbing
and the fastness to brushing of all kinds of colored textiles, digital display.
Standards: ISO105-X12, D02, Bs1006 D02, DIN54021, IWS Tm165, JIS K6328. AATCC8/165
Technical Parameter :
Testing times 1-99999
Rubbing travel 104±3mm
Rubbing speed Manual
Rubbing pressure 9N
Rubbing head Roundness :ф 16mm
External Dimensions 620*160* 230mm
Optional Accessories:
AATCC crocking clothes 1Box (1000Pcs)
ISO Grey Scale
AATCC Grey Scale.
This Button Pull Snap Tester is the unique safety test instrument that provides a means to accurately measure how safe accessories are attached in a product. It is also used to compare a variety of accessories from different vendors in the process from product design to production. It is a simple but effective design mainly consisting of a high precision gauge, a sturdy stand and special grips/clamps. It requires very little train. A sample required by standards & regulations is to be fixed horizontally (constant force is applied to secure the sample) so that snap or other accessories attached in fabric can be clamped into.
It can be used in buttons, zippers, toys testing for many brands like NEXT, M&H, GAP, M&S, NIKE, LIVIS, and other famous brands necessary attachments are available.
.
Standards:16 CFR 1500.51~53、ASTM F963、EN71-Part 1、M&S P115A., H&M, NEXT etc
Standard package 1-16:
1- Imada Force Gauge FB-30K
2- Upper Stud Grip
3- Upper Grasp Button Grip (Upper Tip-Top Grip)
4- Lower Fabric Clamp
5- Low Grasp Button Accessories Kit
6- Three Pronged Clamp
7- Calibration Weight 15LB
8- Mechanical Stand for Imada Force Gauge
9- Upper Long Nose Vise Grip
10- Upper Universal Grip
11- Button snap attachment
12- Extension rod for lower clamp
13- Allen key for handling fitting (2mm)
14- Protective goggles
15- Supper rubber O rings 5 pcs.
16- Operation Manual
Ozone Test Chamber is used to determine the colorfastness of textiles
when it is exposed to ozone in the atmosphere at room temperature..
Features:
The instrument consists of a stainless steel experimental chamber and a fully enclosed gas circuit for the production of ozone by silent discharge. The entire ozone gas generated and captured is enclosed to ensure personal safety. Ozone aeration chamber: composed of ozone generator, fan, baffle, sample compartment.
Standard: AATCC 109, ISO 105 G03
| Temperature control range | 0-80℃, control accuracy: +-0.2℃ |
| Humidity control range | 30-98%，ontrol accuracy: +-2% |
| Ozone concentration | 0-200p.p.h.m,control accuracy:+-1p.p.h.m |
| Ozone chamber size | 500mm (W)x400mm(D)x400mm (H) |
| Sample Hanger | 2 layers |
| Weight | 90Kgs |
| Ozone generation system | |
| The system uses high-precision ceramic high-voltage plate discharge. | |
| Ozone concentration range | random setting 0-500pphm |
| Ozone removal device | Activated carbon |
| Ozone detection system | |
| Detection range | 0-200pphm |
| Measurement accuracy | +-2%,display resolution:0.1pphm |
Used for testing the fastness to dry or wet rubbing and the fastness to brushing of all kinds of colored textiles, motorized operation, auto stop when counts reach pre-set counts..
Features:
- Adopt linear slide, running more smooth
- Rubbing head always keep horizontal, no matter thickness of specimen,
no adjust position of rubbing head, easier operation.
- Adopt block pressing method, better clamping specimen.
Standards: ISO105-X12, D02, Bs1006 D02, DIN54021, IWS Tm165, JIS K6328. AATCC8/165
Technical Parameter :
| Testing times | 1-99999 |
| Rubbing travel | 104±3mm |
| Rubbing speed | 60r/min |
| Rubbing pressure | 9N |
| Rubbing head | Roundness :ф 16mm |
| External Dimensions | 600mm×225mm×270mm |
| Weight | 12kgs |
| Power | AC 220V, 50Hz |