Water Vapour Absorption Tester EN ISO 17229, etc.

Blade Cut Resistance Tester is used to determine the protective capability the safety glove against cutting. .

A driving rotation round blade under a specified load cuts the glove held by the fixture of tester to and fro. After test, compare it with its original statuses to get the results.

Standards: EN388 6.2

Technical Parameter:

Load on blade

5±0.05N

Max.cutting speed

10cm/s (adjustable)

Horizental moveing distance

50mm

Blade Dimension

Diameter: 45±0.5mm, Thickness: 3±0.3mm

Counter

1-99999

Specimen holders

2 Pcs

Blades

6 Pcs (1 one machine, the 5 pcs is as spare blade)

Conductive rubber

4 Pcs

Note: We will update the cut resistance tester similar machine from Satra UK  

Purpose of use:
Apparatus is intended for cut resistance testing of protective gloves, safety, protective and occupational footwear and other products.

  Apparatus is made according to the requirements and apply for the tests according to the following standards:

  Standards: EN 388; c. 6.2, EN ISO 20344; c. 6.14

  Operating principle:
Test specimen and control specimen are cut by a counter-rotating circular blade with a diameter of (45 ± 0,5) mm, a thickness of (0,3 ± 0,03)

  mm, total cutting angle of 30° to 35° and hardness of 700 HV to 720 HV which moves with an alternating motion of 50 mm under a specified load

  of (5 ± 0,5) N with counter that counts down 1/10 cycle of motion with a resulting sinusoidal cutting speed of the blade at (8 ± 2) cm/s.
Protective gloves against mechanical risks – Blade cut resistance
Personal protective equipment – Test methods for footwear – Determination of
resistance of upper to cutting

Description of the device:

The device consists of frame with the main switch unit, control unit with alpha numerical LC display, stand for accommodation the test specimen carrier and control specimen carrier, mechanism with a circular blade, holder of circular blade mechanism in the upper position, test specimen carrier (5 slots) and control specimen carrier (6 slots).

Dimension: (L) 500 x (W) 300 x (H) 250 mm;

Weight: 21 kg;

Power supply: 230 V ~ 50 Hz; 25 W

It’s used to determine the water penetration for various shoe upper materials as leather, synthetic leather, cloth etc.

cut the specimen, then place it into the machine, immersing the specimen into water and flexing it to measure Penetration index or the based of or improve the materials ,water-proof processing. Leather, leather, cloth etc.

Standards: EN 420-4.2.

Technical Parameter:

Working Position

4 Pcs

Cylinder Diameter

30mm

Test Displacement

2,3,4,5, 6mm adjustable

Test speed

50±1cpm

Counter

LCD 0-999 999

Timer

LED 1-999 min

Dimension

500*420*390mm

weight

56kg

Power

AC220V 50HZ 3A

This Apparatus is intended for determination of resistance to cutting by sharp objects – edges, such as knives, sheet metal parts, swart,

   glass, bladed tools and castings on materials and assemblies designed for protective clothing, protective gloves and other personal

   protective equipment against cutting by sharp objects

Standards:
EN ISO 13997:1997 / Protective clothing – Mechanical properties – Determination of resistance to cutting by sharp objects
ASTM F2992/F2992M-15/Standard test method for
Measuring Cut Resistance of Materials Used in Protective
Clothing with Tomodynamometer (TDM) Test Equipment
EN 388:2016; c. 6.3 / Protective gloves against mechanical risks

 Principle:
The device with the use of selected constant force and perpendicular at a velocity of 2,5 mm/s cutting test sample by a blade of standard

  sharpness and measures the cutting stroke length in accurate  to 0,1 mm. The cut resistance of a sample material is expressed as the cutting

 force that is required to be applied to a blade of standard sharpness to just cut through the material in a 20 mm blade stroke

Technical characteristic:
Practical for handling (small size and weight)
Force application system to move the specimen holder towards the blade can be between 0,1 and 200 N,
The device is supplied with weights 0,1 to 61 N (more than 61 N is optional) on an separated stand,
System for set measuring system to zero,
Sliding movable specimen holder length 112 mm on mount with system for adjusting and fixing of 9 cutting – testing position,
Easy and ergonomic replacement of blade and possibility of using unused part of blade two time by turning the blade,
Work area protected with movable transparent plastic cover for injury prevention,
Easy LOCK – UNLOCK system for gentle apply a selected testing force between specimen holder and the blade,
Testing control unit with alpha numerical LCD screen and “START POSITION”, “TEST”, ”STOP” and “COUNTER RESET” command button,
Result of cutting – cutting stroke length in accurate of 0,1 mm displayed on the alpha numerical LCD screen
Weight :39
Power supply:230 V~50 Hz

Consumable accessories:

Standard blades (Box of 100 pcs)

Standard calibration Neopren sheet (10 pcs)

Double sided adhesive roll

Aluminum roll

This Apparatus is intended for determination of resistance to cutting by sharp objects – edges, such as knives, sheet metal parts, swart,

   glass, bladed tools and castings on materials and assemblies designed for protective clothing, protective gloves and other personal

   protective equipment against cutting by sharp objects

Standards:
EN ISO 13997:1997 / Protective clothing – Mechanical properties – Determination of resistance to cutting by sharp objects
ASTM F2992/F2992M-15/Standard test method for
Measuring Cut Resistance of Materials Used in Protective
Clothing with Tomodynamometer (TDM) Test Equipment
EN 388:2016; c. 6.3 / Protective gloves against mechanical risks

 Principle:
The device with the use of selected constant force and perpendicular at a velocity of 2,5 mm/s cutting test sample by a blade of standard

  sharpness and measures the cutting stroke length in accurate  to 0,1 mm. The cut resistance of a sample material is expressed as the cutting

 force that is required to be applied to a blade of standard sharpness to just cut through the material in a 20 mm blade stroke

Technical characteristic:
Practical for handling (small size and weight)
Force application system to move the specimen holder towards the blade can be between 0,1 and 200 N,
The device is supplied with weights 0,1 to 61 N (more than 61 N is optional) on an separated stand,
System for set measuring system to zero,
Sliding movable specimen holder length 112 mm on mount with system for adjusting and fixing of 9 cutting – testing position,
Easy and ergonomic replacement of blade and possibility of using unused part of blade two time by turning the blade,
Work area protected with movable transparent plastic cover for injury prevention,
Easy LOCK – UNLOCK system for gentle apply a selected testing force between specimen holder and the blade,
Testing control unit with alpha numerical LCD screen and “START POSITION”, “TEST”, ”STOP” and “COUNTER RESET” command button,
Result of cutting – cutting stroke length in accurate of 0,1 mm displayed on the alpha numerical LCD screen
Weight :39
Power supply:230 V~50 Hz

Consumable accessories:

Standard blades (Box of 100 pcs)

Standard calibration Neopren sheet (10 pcs)

Double sided adhesive roll

Aluminum roll

This Apparatus is intended for testing resistance to cutting by a chain saw of personal protective equipment designed to protect against the risks arising from the use of hand-held chain saws.

Apparatus is made according to the requirements and apply for the tests according to the following standards:

EN 381-1 Protective clothing for users of hand-held chain saws – Part 1: Test rig for testing resistance to cutting by a chain saw

Operating principle:
The test rig has been designed to apply a moving chain saw to personal protective equipment in such a way that both the speed of chain and the amount of kinetic energy applied are controllable. At the moment of test the chain is not at the power (physically disconnected) and moves solely under the influence of its own momentum, together with that of a flywheel to which it is connected. The chain is than allowed to pivot down onto the test sample. The result of test is observation whether or not the sample shows a cut-through at given test speed.

Description of the device:
The device was made according to requirements of standard EN 381-1 with ability to adjust a test speed from 0 to 32 m/s and consists of digital speed display, digital timer (in sec/100) of measurement for free running stopping time, system for positioning adjustment of chain saw and lowest positioning safety stopper for test mount protection and protective cover with safety electronic system. The device also contains test mount for testing of leg protectors according EN 381-2 adjustable in 45° and 90° position, eight pieces of weights (250 g) for uniform tension of calibration pad/test sample, device for preparing sample before put on mount (for perforation hold for needles), distance plate for determination of distance between chain and test sample or calibration pad, one spare guide bar, chain and covering material (EVA foam).

Dimension: (L) 850 x (W) 650 x (H) 1250 mm;
Weight: 90 kg;
Power supply: 230 V ~ 50 Hz;