Whirlpool Washing Machine 10.5 Kg
This is the new Whirlpool Washing Machine with improved efficiency. This new top loading super capacity washer begins a whole new chapter in cleaning. It boasts a 10.5kg dry clothes tested tub, with the latest belt driven technology. Its quieter, more energy efficient and uses much less water. Most importantly, less moving parts than our competitors, and a history of the best service record in the industry. Whirlpool is the Leader in laundry products, and continues to come up with new and innovative ideas to make your life easier.
Features:
White Washer with White Control Panel
New Sensing Technology – Series of spins prior to load start checks to balance load Electronic Control – Showing cycle status
Push Start/Pause/Unlock Button
New Lid Lock with light control – Allowing for higher spin speeds (lid locked during Fill, Agitate, Drain and Spin)
Spray Rinse Feature – Fills out tub with water as it spins
2 Spins Speeds – Max. 700 RPM, better water extraction
White Porcelain Basket
Xtra Roll Action™ Plus Dual Action Agitator
Bleach and Fabric Softener Dispensers
Fabric Softener/Extra-Rinse Knob
Wide Open Solid Lid
8 Cycles
$0.00
Out of stock
Related Products
Application:
It is used for color matching of any product under different lights, it is wide ly applied in Textile, toy, printing, plastic, rubber, chemical, ink, ceramic,
leather, , paints, chemicals, footwear, leather, metal, food, cosmetics multi-industry field.
Meets to m ajor international standards for visual color evaluation including:
ASTM D17 29, ISO3664, DIN, ANSI and BSI.
Tube length: 12 00mm
Easy to operate by using individual switches for each light source.
Elapsed time meter for tracking optimal l amp replacement.
Automatically alternating among light sources.
No warm-up time or flickering which insures quick and reliable color judgment
Economic power consumption and low heat generation for high light efficiency
Lights:
| Model | Name | Pcs | Power | Color Temperature |
| Six Lights
220V, 50Hz |
D65 | 2 | 36W/Piece | 6500K |
| TL84 | 2 | 36W/Piece | 4000K | |
| F/A | 6 | 40W/Piece | 2700K | |
| UV | 1 | 40W/Piece | 365nnm | |
| CWF | 2 | 36W/Piece | 4200K | |
| U30 | 2 | 36W/Piece | 3000K |
To alter the specification or modify the appearance without notice right is reserved
This Button Pull Snap Tester is the unique safety test instrument that provides a means to accurately measure how safe accessories are attached in a product. It is also used to compare a variety of accessories from different vendors in the process from product design to production. It is a simple but effective design mainly consisting of a high precision gauge, a sturdy stand and special grips/clamps. It requires very little train. A sample required by standards & regulations is to be fixed horizontally (constant force is applied to secure the sample) so that snap or other accessories attached in fabric can be clamped into.
It can be used in buttons, zippers, toys testing for many brands like NEXT, M&H, GAP, M&S, NIKE, LIVIS, and other famous brands necessary attachments are available.
.
Standards:16 CFR 1500.51~53、ASTM F963、EN71-Part 1、M&S P115A., H&M, NEXT etc
Standard package 1-16:
1- Imada Force Gauge FB-30K
2- Upper Stud Grip
3- Upper Grasp Button Grip (Upper Tip-Top Grip)
4- Lower Fabric Clamp
5- Low Grasp Button Accessories Kit
6- Three Pronged Clamp
7- Calibration Weight 15LB
8- Mechanical Stand for Imada Force Gauge
9- Upper Long Nose Vise Grip
10- Upper Universal Grip
11- Button snap attachment
12- Extension rod for lower clamp
13- Allen key for handling fitting (2mm)
14- Protective goggles
15- Supper rubber O rings 5 pcs.
16- Operation Manual
The GSM Cutter is for sampling the materials of fabrics and non-fabrics.
The handle is made of aluminum alloy, no broken, Star structure is designed according to the
human touch.
Adopt the high-carbon blade (white); press plate is made of aluminum alloy, not rust, Tight press.
here are 16 stainless steel cross screws on the press plate , make it firm and not slide ,
no rust .
The cutter’s face adopt international advanced T-shaped anti-slip groove structure; minimize the stress in the tangent direction during the cutting and reduce hand fatigue, also ensure that the sample is flat and not slip, a precise cutting .
Adopt the thickness adjustable structure to protect the blade and pad.
It use cork pad, not rubber pad.
Standard: ISO3801, BS2471, ASTM D3776, IWS TM13
Technical Parameter:
Sample area: 100cm2
Max. Cutting thickness: 5mm
External Dimensions: 156×112
Accessories: 2 cutting pads included
4 Extra cutting Blades included (Made in UK)
Xenon light fastness tester is mainly used for test of the color fastness to light and weather fastness of all kinds of nonferrous, coloring textile; it can also be used for testing the color fastness and ageing of painting, pigment, paint, rubber, plastic, paper and other materials. It has high intelligence, high measurement and control precision, stable performance; and it also has touch screen which is graphic mark displaying, friendly interface, it also easy to operate.
Standard: ISO105-B02/B04/B06 AATCC 16 JIS L0843 ISO 4892-2
Feature:
- Using 3300W long arc xenon lamp, truly simulate daylight spectrum;
- Adopt high transmittance filter combination, using 95% of the transmittance of the filter and the filter
cylinder, to achieve the same irradiance optical requirements of low power consumption,
makes the instrument more energy saving and environmental protection
- Automatic compensating system (PATENT) control the Xenon Lamp Power.
- Large touch screen, indicate the condition of chamber at real-time, be able to presetting irradiance,
temperature (BPT or BST, chamber), humidity and plot dynamic curve of them.
- The operator simply selects the required test module and test standards;
- 6. English user interface, diagram indicate condition of chamber, easy to use.
- 7.PLC control, powerful program and storage property, save the parameters when interrupt of power supply.
- Custom program capability and storage for additional user-defined tests.
- 9.Built-in diagnostics and warnings, automatic prompt when lamp or optical filters require changing.
- 1 Multi-position sensor to supervise working condition, temperature, humidity, fan, xenon lamp, and door to chamber, it makes device work properly and reliably.
- 1Adopt (PATENT) military transmission technology in order to prevent electronic parts aging because of wireless transmission.
- A test can be 1000 hours of continuous operation of quality assurance.
Technical Parameter:
Light source: 3300W air-cooled long-arc xenon lamp Life of lamp: 1000-1500 hours
Chamber Temperature range: 25 ~ 50 C, accuracy: +/- 2 C
Blackboard temperature range: 30-80 C Accuracy: +/- 3 C
Humidity range: 10 ~ 95% RH, accuracy: +/- 5%
Irradiance: 0.60 ~ 2.01W/m2/420nm (340nm, 300~400nm, 300~800nm is offered on request), Digital set, automatic closed-loop compensation
Control Accuracy of Irradiance: +/- 0.02W/m2/420nm
Photoperiod: ≤1000h
Spray cycle: ≤1000h
Rotation speed of sample holder: revolution 5r/min
Dimension: 1200 x 800 x 1720mm
Weight: 213kg
| ITEM | Unit | QTY |
| Light Fastness Tester | Set | 1 |
| ISO sample clamp (can double side | Set | 11 |
| place the specimen) | ||
| AATCC sample clamp (can double | Set | 5 |
| side place the specimen) | ||
| Black board thermometer | Pc | 1 |
| Black standard thermometer | Pc | 1 |
| Filter glass | Pc | 7 |
| Filter Canister | Pc | 1 |
| Filter component | Set | 1 |
| Upper air canister | Pc | 1 |
| Top tube | Pc | 1 |
| Blue Wool | Optional | SDC Brand |
| Color Matching Cabinet | Optional | 1 |
To determine the color fastness of textiles to dry or wet rubbing.
A pinned acrylic sample holder ensures rapid sample mounting and repeatability of results. Fitted with a pre‐determined electronic counter for strokes up to 9999,
Standards: ISO105‐X12, D02, Bs1006 D02, DIN54021, IWS Tm165, JIS K6328.
Technical Parameter:
Testing Time: 1‐99999
Rubber Travel: 104/100mm (Can be adjust)+/- 3mm
Rubbing Speed: 60r/min
Rubbing pressure: 9N
Rubbing Head: Roundness:φ16mm
Dimension: 600mm x 225mm x 270mm
Weight: 11kgs
Power Source: AC 220V, 50Hz
Accessories:
Rubbing clothing 1 (box)
Sand paper 2 (pcs)
Rings 2 (pcs)
Introduction :
Application scope of XHF-05 Martindale Abrasion & Pilling Tester : suitable for the wear-resistance and grinding test under certain pressure of woven and wool-blend fabrics, Leather, knitted goods and non-woven fabric
Standards: ISO5470, IWS TM112/196, DIN53863/53865, BS3424/5690, BS EN 388/530, JIS L1096, ASTM D4966/4970 , ISO17079-2, ISO 12947, ISO17704, ISO 20344, ISO 17076-2, SATRA TM31 and so on.
Features of touch screen Martindale:
1.Machines with two Lissa-jous trajectory.
2.Using color touch-screen operation, PLC control, each working position can be controlled separately.
- Motor overheat protection, convenient operation.
- There is a alarm when the test is finished.
- Data can be restored after the power failure.
Technical Parameters:
Work-station number : 6 or 9 pcs
Counter display : Pre-set counter display: 0-999999
Cumulative counter display: 0-999999
Abrading table diameter : 120mm
Test pressure (abrasion test)
A: cloth specimen clamp:198g +/- 2g
B: textile specimen hammer:395g +/-2g (Equal to 9Kpa)
C: furniture deck specimen hammer:594g +/-2g (Equal to 12Kpa)
Pressure test (pilling test)
A: cloth specimen clamp:155g +/-1g
B: textile specimen hammer:260g +/-1g
Weight of Load hammer: 2385g +/-10g
Dimension: 850mm\ x 600mm x 400mm
Weight: Machine 120kgs Accessories box: 22kgs Voltage supply:220V/110V, 50HZ/60Hz
Packing list
| No. | Name | Quantity | Remark |
| 1 | Abrasion tester | 1 | Main body |
| 2 | Pin Shaft | 6 or 9 | |
| 3 | Hammer | 1 | |
| 4 | Lissa-jous trace pen | 1 | |
| 5 | Dia 140 sample cutter | 1 | |
| 6 | Dia 38 sample cutter | 1 | |
| 7 | Dia 90 sample cutter | 1 | |
| 8 | Weights | 12 or 18 | 395g, 594g each 6 pcs |
| 9 | Specimen clamps | 12 or 18 | dia38mm, dia90mm each 6 pcs |
| 10 | Abrasion table | 6 or 9 | |
| 11 | Specimen fix ring | 6 or 9 | |
| 12 | Rubber rings | 12 or 18 | For installing dia90mm specimen |
| 14 | Load disc | 6 or 9 | |
| 15 | Accessories Case | 2 | Aluminum-Alloy Case |
APPLICATIONS:
Adjust to the same pick up with bulk production and provide precise pressed dyeing or resin prescription To check the color shade change and to further avoid it happening during resin finishing or heat setting processes after dyeing. Application tests of water repellent, flame retarding and other coating tests special features.
SPECIAL FEATURES:
- Constant nip pressure can be kept due to pneumatic design
- The left or right side pressure of padding roller can be independently adjustable to the required one.
- Easy to operate once you set the required padding nip pressure no other re‐adjustment will be needed.
- Safety devices include a fabric feeder, safety rod, emergency button and a knee pedal to make sure the safe operations at every test.
SPECIFICATION:
- One pair of padding rollers made of N, B, R, rubber material of 70°shore hardness
- Rubber roller diameter 125mmφlength 450 mm
- Driven by 1/4 hp motor with speed reducer (voltage & hertz to be specified)
- Revolving speed is 0‐10m/min (variable frequency speed control)
- Two pressure gauges 0~5kg /cm2
- Two pressure regulating valves (precision 0.1 kg /cm2)
- Air compressor is excluded.
Technical Parameter:
| Model | P‐A Vertical type | P‐B Horizontal Type |
| Dimensions | 85×56×140CM | 85×56×140CM |
| Power | 380‐400 VAC, 50Hz | 380‐400 VAC, 50Hz |
| Net Weight: | ~120 KGS | ~120 KGS |
| Shipment weight: | ~210 KGS | ~190 KGS |
| Shipmen Dimension: | ~100*75*145CM | ~95*75*120CM |
The Vertical Fabric flammability tester is used for testing trend of after flame, flame retardant and carbonization of camping tentage.. It is automatically determine the flammability resistance to a vertical flame of camping tentage.
Characteristics:
1 . Use PLC touch screen control
- Electric automatically burner, light clocking set freely from 0-999.9s.
- Burning chamber is stainless steel.
- Flame height can be adjusted
- Automatically burner orientation
Standards: CPAI 84 Flammability Test Method Wall and Top Material
| Technical Parameters : | ||
| Vent Holes | Top 16 pcs, Two sides, each 6 pcs, diameter: 13mm | |
| Time range and accuracy | 0.0-999.9S, resolution 0.1S (adjustable) | |
| Burner | Inner diameter: 5mm, barrel: 75mm | |
| Distance between burner and | 20mm | |
| specimen | ||
| Flame Height | 38mm (adjustable) | |
| Ignition time in test | 12S (adjustable) | |
| Specimen Size | 300x70mm | |
| Inner dimension of clamp | 360x50mm | |
| Load weights | 50g, 100g, 200g, 350g | |
| Dimensions | 600 x 400x850mm | |
| Weight | 35kg | |
| Power source | 110V/220V, 50Hz/60Hz | |
The Launderometer (washing fastness tester, called different names as (Gyrowash, Rotawash, Dynowash), to determine color fastness to washing or dry cleaning to washing fastness methods, it complies with ISO, BSI, AATCC and Marks& Spencer standards.
Feature:
Available in different sizes such as portable washing fastness tester, etc. The washing fastness tester uses stainless steel rotor to holds washpots on each of four sides and rotates at a constant 40 rpm (+/-2 rpm). Washpots are preheated in appropriate test solution, structure wholly made of very strong stainless steel.
Color touch screen display and PLC control, containers are sealed with either a Neoprene rubber gasket or optional Teflon gasket.
Small and large test vessels are interchangeable so they can be placed in every position.
This allows operators to test to both ISO (European) and AATCC (American) Standards with ease.
To offer a reliable and safe washing fastness test, Washing fastness tester equipped with water-lacking alarm, protection device when opening door, Test-finished alarm, Automatic shutdown with audible warning etc, electric drainage function is optional.
Standard: ISO105 C01-C06, M& SC4A. 5.37. P3B, IWSTM 7.115.177.193.240, 241, AATCC 2, 3, 28, 61, 62, 86, 132, 151, 190, FTMS 191-5610/5622, BS 1006, NEXT
Technical Parameter:
Rotation speed: 40+/-2/rpm
Quantity of positions: 8, 12, 16, 20 depend on customer’s request
Size of ISO washpot: 550ml 75mm dia x 125mm(3.0 in x 5.0in)
Size of AATCC washpot: 1200ml 90mm diax 200mm(3.5 in x 8.0in)
Temperature : Max 95℃ Adjustable
Running time: Adjustable
PACKING LIST:
| No. | Name | Quantity | Remark | |
| 1 | Washing Fastness Tester | 1 set | Main body | |
| 2 | 550ml Container+Vessles | 1 Set | Optional | |
| 3 | 1200ml Container+ Vessels | Optional | ||
| 4 | Stainless Steel Balls | 50 | Pcs | For each pot |
| 5 | Stainless Steel Discs | 1 | Pc | For each pot |
| 6. | Electric Drainage Function | 1 | Pc | Optional |
Yarn count machine works with textile electronic balance is a kind of intellectual measuring instrument with weighing, counting and other many functions. The product introduces imported Integrated circuit and enjoys stable and reliable performance, easy operation and accurate weighing and counting. As a kind of measuring instrument, it has been widely used by enterprises and scientific research institutions.
Function:
It has: g,oz,tex,Nm,Ne,D,g/m2kinds of the units to change. Select 1-10 pcs specimen measurement
It can print the date, time, specimen length, each weighing value, calculated MIN (minimum), MAX (maximum), SUM (sum), AV (average), CV% (non-uniform rate). Overload malfunction indication.
Working Condition:
Working Temperature: 0°～40°C
Maximum Consumed Power: 3W
Pan Size: Diameter 80mm
Power Supply: Adaptor input -220V±10﹪, 50HZ±1HZ。Output- 9v，300mA
Comparative Humidity: 50﹪～85﹪
Range: 210g
Accuracy: 1mg (0.001g)
Standard Configuration: Balance, Printer, Calibration Weight
Rotary Crock Meter to determine the color fastness of textiles to dry and wet rubbing particularly for printer fabrics. Applies 1134g of pressure on a 16mm finger and rotates 1.125 turns clockwise then anti-clockwise. The operating handle is however turn in one direction only.
Standards: AATCC 116; ISO 105 X16
Technical Parameter:
Diameter of rubber head: Diameter of rubbing head: 16±0.1mm
Turning of vertical pole: after turning1.125 circles then reverse
Dimensions: 260×150×210mm
Weight: 5kg
Optional:
AATCC crocking clothes 1Box (1000Pcs)
AATCC grey scale
This machine is suitable for dyeing in common temperature (20℃-100℃)
and the operation is simple. Neutral alkali, salt and other additions can be softly added during the process of dyeing.
It also applies to the cotton bath, soap and bleached experiment
Features:
Equip imported motor with large Angular moment from Taiwan.
The shell is made of stainless steel S.S304 material
Programmable Temperature controller and PT-100 probe
Technical Parameter:
Number of Beaker: (24Cups)
Beaker Specification: 250cc Triangular Glass Beaker
Oscillation Speed: 30-200 reciprocation/min
(shaking from right to left)
Temperature Range: Room Temperature – 100℃
Heating: Electrical Heating
Power Supply: 4kw, AC220V, 50HZ
Overall Dimension (L*W*H): 106*55*72c m
Included: 250cc Triangular glass Beaker