Yarn Count Balance
Yarn count machine works with textile electronic balance is a kind of intellectual measuring instrument with weighing, counting and other many functions. The product introduces imported Integrated circuit and enjoys stable and reliable performance, easy operation and accurate weighing and counting. As a kind of measuring instrument, it has been widely used by enterprises and scientific research institutions.
Function:
It has: g,oz,tex,Nm,Ne,D,g/m2kinds of the units to change. Select 1-10 pcs specimen measurement
It can print the date, time, specimen length, each weighing value, calculated MIN (minimum), MAX (maximum), SUM (sum), AV (average), CV% (non-uniform rate). Overload malfunction indication.
Working Condition:
Working Temperature: 0°～40°C
Maximum Consumed Power: 3W
Pan Size: Diameter 80mm
Power Supply: Adaptor input -220V±10﹪, 50HZ±1HZ。Output- 9v，300mA
Comparative Humidity: 50﹪～85﹪
Range: 210g
Accuracy: 1mg (0.001g)
Standard Configuration: Balance, Printer, Calibration Weight
$875.00
Related Products
Application:
It is used for color matching of any product under different lights, it is wide ly applied in Textile, toy, printing, plastic, rubber, chemical, ink, ceramic,
leather, , paints, chemicals, footwear, leather, metal, food, cosmetics multi-industry field.
Meets to m ajor international standards for visual color evaluation including:
ASTM D17 29, ISO3664, DIN, ANSI and BSI.
Tube length: 12 00mm
Easy to operate by using individual switches for each light source.
Elapsed time meter for tracking optimal l amp replacement.
Automatically alternating among light sources.
No warm-up time or flickering which insures quick and reliable color judgment
Economic power consumption and low heat generation for high light efficiency
Lights:
| Model | Name | Pcs | Power | Color Temperature |
| Six Lights
220V, 50Hz |
D65 | 2 | 36W/Piece | 6500K |
| TL84 | 2 | 36W/Piece | 4000K | |
| F/A | 6 | 40W/Piece | 2700K | |
| UV | 1 | 40W/Piece | 365nnm | |
| CWF | 2 | 36W/Piece | 4200K | |
| U30 | 2 | 36W/Piece | 3000K |
To alter the specification or modify the appearance without notice right is reserved
This Tabletop spectrophotometer has the advantage of excellent inter-instrument agreement, high accuracy and good replicability.
It could meet your requirement for both color quality control and color matching very easily.
Brief Introduction
- Transmission D/0 Structure and Reflection D/8 Structure
- Double Optical Paths Spectral Analysis Technology.
It could get the measurement sample data and internal environment data at the same time to make sure the testing accuracy and
stability for long time running.
- Compatible with SCI/SCE Measurement.
Adopt D/8 illuminant condition recommended by the CIE to meet the color testing requirement for different industries. It could measure with SCI and SCE to see the color data change more clearly.
- Four Testing CalibersIt is easy to adjust the testing calibers.The largest caliber diameter reaches 25.4mm. It could test the sample with different sizes.
This is not only suitable for testing the color of opacity sample, but also suitable for transparent or translucent sample’s transmittance and turbidity.
- Large screen display and Stand-alone operation.It could finish the sample test without connecting with the computer. Large screen display to make sure customer could see the testing result directly and clearly and it will be more convenient to set the instrument status. The color quality management software and color match software are optional according to customer’s need.
- Unique Calibration Board Design.Fix the calibration board on the testing caliber to make sure the accuracy of the white calibration and guarantee the high accuracy for measurement.
- Flexible Test Fixture.It could fix the sample with different size and thickness on the testing port tightly in case of stray light entering to affect the testing accuracy.
Technical Data:
| Type | XHF-CS-820 | |
| Measurement Condition | Reflection: d/8(Diffused lighting, 8 degrees receiving) Compatible with SCI/SCE Measurement ISO7724/1、DIN5033 Teil7、JIS Z8722 condition C、CIE No.15、ASTM E1164）Transmission d/0(Diffused lighting, Vertical direction receiving) | |
| Size of integrating sphere | Φ15.2cm, Alvan diffused reflection surface coating | |
| Illumination Light source | CLEDs(entire wavelength balanced LED light source） | |
| Sensor | dual light path sensor array | |
| Wavelength range | 400-700nm | |
| Wavelength interval | 10nm | |
| Half spectral width | 5nm |
| Reflectivity range | 0-200% | |
| Reflectivity resolution | 0.01% | |
| Observation angle | 2°/10° | |
| Measurement light source | A,C,D50,D55,D65,D75,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12
CWF,U30,DLF,NBF,TL83,TL84 |
|
| Data being displayed | SPD distribution/data, sample’s color values, color difference Values / graph, pass/fail results, color error tendency, history data color
simulation, manual input standard sample, generate measurement report |
|
| Measurement time interval | 2 seconds | |
| Large Aperture (LAV):2.54cm (=1inch) | ||
| Reflection Aperture | Medium Aperture (MAV):1.5cm(=0.6inch) | |
| Small Aperture (SAV):0.75cmx1.0cm(0.3inch x 0.4inch) | ||
| Very Small Aperture (VSAV):0.3cmx0.8cm(0.12inch x 0.31inch) | ||
| Color space | CIE-L*a*b,L*C*h,CIE-L*u*v,XYZ,Yxy,Transmittance, Hunterlab, | |
| Munsell MI,CMYK, RGB，HSB | ||
| Color difference formulas | ΔE*ab,ΔE*CH,ΔE*uv,ΔE*cmc(2:1),ΔE*cmc(1:1),ΔE*94,ΔE*00 | |
| ΔEab(Hunter),555color classification | ||
| Other colorimetric indices | WI(ASTM E313-10,ASTM E313-73,CIE/ISO, AATCC, Hunter, Taube
Berger, Ganz, Stensby),YI(ASTM D1925，ASTM E313-00,ASTM E313-73),Tint(ASTM E313-00,CIE,Ganz),Metamerism index Milm, Stick color fastness, Color fastness, APHA, Pt-Co, Gardner |
|
| Repeatability | light splitting reflectivity: standard deviation within 0.08% color values: ΔE*ab<=0.015(After calibration, standard deviation of 30 measurements on test white board, 5 second intervals, Maximum: 0.03 | |
| Interface | USB | |
| Data storage | mass storage | |
| Light source longevity | 5 years, 1.5 million tests | |
| Size | 583*330*304mm(L*W*H) | |
| Work temperature range | 15℃-32℃ (60°F-90°F) | |
| Relative Humidity | 0℃ to 45℃，relative humidity 80% or below at 35°C, no condensation | |
| Standard accessories | AC power line, color management software, drive software, USB
cable, black/white calibration tube, 40*10 cuvette, cuvette support, testing report |
|
| Optional | 40×40 cuvette | |
The Vertical Fabric flammability tester is used for testing trend of after flame, flame retardant and carbonization of camping tentage.. It is automatically determine the flammability resistance to a vertical flame of camping tentage.
Characteristics:
1 . Use PLC touch screen control
- Electric automatically burner, light clocking set freely from 0-999.9s.
- Burning chamber is stainless steel.
- Flame height can be adjusted
- Automatically burner orientation
Standards: CPAI 84 Flammability Test Method Wall and Top Material
| Technical Parameters : | ||
| Vent Holes | Top 16 pcs, Two sides, each 6 pcs, diameter: 13mm | |
| Time range and accuracy | 0.0-999.9S, resolution 0.1S (adjustable) | |
| Burner | Inner diameter: 5mm, barrel: 75mm | |
| Distance between burner and | 20mm | |
| specimen | ||
| Flame Height | 38mm (adjustable) | |
| Ignition time in test | 12S (adjustable) | |
| Specimen Size | 300x70mm | |
| Inner dimension of clamp | 360x50mm | |
| Load weights | 50g, 100g, 200g, 350g | |
| Dimensions | 600 x 400x850mm | |
| Weight | 35kg | |
| Power source | 110V/220V, 50Hz/60Hz | |
Xenon light fastness tester is mainly used for test of the color fastness to light and weather fastness of all kinds of nonferrous, coloring textile; it can also be used for testing the color fastness and ageing of painting, pigment, paint, rubber, plastic, paper and other materials. It has high intelligence, high measurement and control precision, stable performance; and it also has touch screen which is graphic mark displaying, friendly interface, it also easy to operate.
Standard: ISO105-B02/B04/B06 AATCC 16 JIS L0843 ISO 4892-2
Feature:
- Using 3300W long arc xenon lamp, truly simulate daylight spectrum;
- Adopt high transmittance filter combination, using 95% of the transmittance of the filter and the filter
cylinder, to achieve the same irradiance optical requirements of low power consumption,
makes the instrument more energy saving and environmental protection
- Automatic compensating system (PATENT) control the Xenon Lamp Power.
- Large touch screen, indicate the condition of chamber at real-time, be able to presetting irradiance,
temperature (BPT or BST, chamber), humidity and plot dynamic curve of them.
- The operator simply selects the required test module and test standards;
- 6. English user interface, diagram indicate condition of chamber, easy to use.
- 7.PLC control, powerful program and storage property, save the parameters when interrupt of power supply.
- Custom program capability and storage for additional user-defined tests.
- 9.Built-in diagnostics and warnings, automatic prompt when lamp or optical filters require changing.
- 1 Multi-position sensor to supervise working condition, temperature, humidity, fan, xenon lamp, and door to chamber, it makes device work properly and reliably.
- 1Adopt (PATENT) military transmission technology in order to prevent electronic parts aging because of wireless transmission.
- A test can be 1000 hours of continuous operation of quality assurance.
Technical Parameter:
Light source: 3300W air-cooled long-arc xenon lamp Life of lamp: 1000-1500 hours
Chamber Temperature range: 25 ~ 50 C, accuracy: +/- 2 C
Blackboard temperature range: 30-80 C Accuracy: +/- 3 C
Humidity range: 10 ~ 95% RH, accuracy: +/- 5%
Irradiance: 0.60 ~ 2.01W/m2/420nm (340nm, 300~400nm, 300~800nm is offered on request), Digital set, automatic closed-loop compensation
Control Accuracy of Irradiance: +/- 0.02W/m2/420nm
Photoperiod: ≤1000h
Spray cycle: ≤1000h
Rotation speed of sample holder: revolution 5r/min
Dimension: 1200 x 800 x 1720mm
Weight: 213kg
| ITEM | Unit | QTY |
| Light Fastness Tester | Set | 1 |
| ISO sample clamp (can double side | Set | 11 |
| place the specimen) | ||
| AATCC sample clamp (can double | Set | 5 |
| side place the specimen) | ||
| Black board thermometer | Pc | 1 |
| Black standard thermometer | Pc | 1 |
| Filter glass | Pc | 7 |
| Filter Canister | Pc | 1 |
| Filter component | Set | 1 |
| Upper air canister | Pc | 1 |
| Top tube | Pc | 1 |
| Blue Wool | Optional | SDC Brand |
| Color Matching Cabinet | Optional | 1 |
Introduction :
Application scope of XHF-05 Martindale Abrasion & Pilling Tester : suitable for the wear-resistance and grinding test under certain pressure of woven and wool-blend fabrics, Leather, knitted goods and non-woven fabric
Standards: ISO5470, IWS TM112/196, DIN53863/53865, BS3424/5690, BS EN 388/530, JIS L1096, ASTM D4966/4970 , ISO17079-2, ISO 12947, ISO17704, ISO 20344, ISO 17076-2, SATRA TM31 and so on.
Features of touch screen Martindale:
1.Machines with two Lissa-jous trajectory.
2.Using color touch-screen operation, PLC control, each working position can be controlled separately.
- Motor overheat protection, convenient operation.
- There is a alarm when the test is finished.
- Data can be restored after the power failure.
Technical Parameters:
Work-station number : 6 or 9 pcs
Counter display : Pre-set counter display: 0-999999
Cumulative counter display: 0-999999
Abrading table diameter : 120mm
Test pressure (abrasion test)
A: cloth specimen clamp:198g +/- 2g
B: textile specimen hammer:395g +/-2g (Equal to 9Kpa)
C: furniture deck specimen hammer:594g +/-2g (Equal to 12Kpa)
Pressure test (pilling test)
A: cloth specimen clamp:155g +/-1g
B: textile specimen hammer:260g +/-1g
Weight of Load hammer: 2385g +/-10g
Dimension: 850mm\ x 600mm x 400mm
Weight: Machine 120kgs Accessories box: 22kgs Voltage supply:220V/110V, 50HZ/60Hz
Packing list
| No. | Name | Quantity | Remark |
| 1 | Abrasion tester | 1 | Main body |
| 2 | Pin Shaft | 6 or 9 | |
| 3 | Hammer | 1 | |
| 4 | Lissa-jous trace pen | 1 | |
| 5 | Dia 140 sample cutter | 1 | |
| 6 | Dia 38 sample cutter | 1 | |
| 7 | Dia 90 sample cutter | 1 | |
| 8 | Weights | 12 or 18 | 395g, 594g each 6 pcs |
| 9 | Specimen clamps | 12 or 18 | dia38mm, dia90mm each 6 pcs |
| 10 | Abrasion table | 6 or 9 | |
| 11 | Specimen fix ring | 6 or 9 | |
| 12 | Rubber rings | 12 or 18 | For installing dia90mm specimen |
| 14 | Load disc | 6 or 9 | |
| 15 | Accessories Case | 2 | Aluminum-Alloy Case |
Multipurpose Flammability Tester automatically determine the flammability resistance to a vertical flame of apparel fabrics, protective fabrics, curtains and children’s sleepwear.
Standard: BS EN ISO 6940, EN ISO 6941, BS 5438, EN ISO 15025
Technical Parameter:
Ignition of the time range:0-99.99S
Precision: 0.01S
Continued burning time:0-999.9S
Ignition fire mouth: According to ISO 6941 Standard
Fire Mouth angle: 0°/30°/90°(Adjustable)
Flame Measurement Height: 20mm/40mm
Dimension inside U clamp: 80mmx600mm
Mark line on U clamp: adjustable
Dimension:800mmX550mmX660mm
Weight: 50kgs
Power: AC 220V/110V
Automatic Fabric Air Permeability Tester is used to test the air permeability of various woven fabrics, knitted fabrics, non-woven fabrics, industrial filter materials etc
Standards:
ASTM D737, ASTM D3574, AFNORG07-111, BS5636, DIN53,887,EDANA140.1, EN IS07,231, ENISO9,237, JIS L1096-A, TAPPI T251 and so on.
S Model: Manual replacement of the Orifice plate.
A Model: Automatic replacement of the Orifice plate.
- More excellent anti-jamming, more excellent stability, more rapid data transference speed.
- Adopt microcomputer control system, branded high accuracy pressure sensor, digital feedback and adjust air volume.
- Automatic orifice plate replacement, no manual replacement .
4.Automatic orifice plate replacement, no manual replacement
- Automatic follow, measure and display pressure difference of each point with high stability and repeatability.
- All plates have been calibrated by-point in full testing range to let test data more accuracy.
- All test data is displayed by large high-definition large color touch screen displayer, no need to calculate test result by hands.
- Automatic converse air permeability rate and air permeability volume to improve test efficiency.
- Large touch screen displayer and controller.
- Adopt micro-computer control, insure the test data accuracy and test data can be saved and processed automatically.
- Special designed sample holder accomplish test in box and ensure the yarn without slip.
- Equipped with the inner printer, test report can be printed anywhere.
- Testing procedure can be set conveniently by the inner control panel.
- 14 With the function of saving data when power-down.
- Professional software support to output results to PC.
Technical Parameters:
- Working pattern: high precision imported pressure sensor, touch screen control, printing and testing report
- Pressure volume : 50-500Pa
- Specimen thickness: ≤12mm
4 .Measuring accuracy : ≤±2%
- Test area/diameter: 20 cm2, 38 cm2 Optional : 50 cm2,100cm2, 5 cm2, φ50mm
- Units: Total 8 Units to can be freely switched: mm/s, L/m2/s, L/dm2/min, cm3/cm2/s, ft3/ft2/min, m3/m2/min, m3/m2/h, dm3/s
- Orifice plate: 8 Pcs ( Φ0.5mm, Φ1.0mm, Φ1.5mm, Φ2.5mm, Φ4.5mm, Φ8.0mm, Φ14.5mm, Φ26mm)
- Calibration : unique calibration board
- Permeability ratio range: 0.2-11000mm/s (L/m2.S)
- External Dimensions: 700x1000x1000mm
- Gross Weight: 100kg
- Power source: 220V±10% 50HZ
To alter the specification or modify the appearance without notice right is reserved
This Fabric shrinkage tester is used for testing the shrinkage and relaxation after washing of various textiles such as cotton, wool, silk, linen, chemical fiber, knitwear, costume etc. It is fit for the factory and testing center with the long-term test.
Standards:ISO-6330-2012, ISO 5077, IWSTM31, BS4923, EN25077/26330, JISL1909, FZ/T70009.
Features :
The apparatus used are for industrial design, suit to the harsh long continuous testing requirements
Suspended inner canister exclusive used, smoothly operation without vibration
Include 12 groups washing programes, users can prepare 6 groups their own shrinkage procedures, and provide programs storage
Variable frequency control technology used, to protect the electrical safety and the smooth operation.
Large touch screen display, figures show clearly
Using high-precision pressure sensors, to ensure that accurate and reliable water level.
Outside and inside fully use stainless steel.
Technical parameters:
| Category | Horizontal roller type, front door feeding mode |
| Inner layer roller | Diameter : 520±1mm |
| Depth: 315±1mm | |
| Inner & outer roller
gap |
2.8cm±0.1cm |
| Lift vane quantity | 3 PCS 120° even distribution |
| Lift vane height | 53mm±1mm |
| Rotation action | Normal: clockwise rotation (12±0.1)S, stop (3±0.1)S |
| anticlockwise rotation (3±0.1)S, stop (12±0.1)S | |
| Soft: clockwise rotation (3±0.1)S, stop (12±0.1)S | |
| anticlockwise rotation (3±0.1)S, stop (12±0.1)S | |
| Rotating speed | Washing time: 52r.p.m |
| Spin : (500±20)r.p.m | |
| Water level control | Low level:10cm , High level:13cm |
| Fill water time | < 2min (water in high level 13cm |
| Drainage duration | < 1min (water in high level 13cm) |
| Setting range to
water temperature |
Room temperature to 99℃ (accuracy: ±1℃) |
| Heating power | 5.4kw |
| Washing capacity | 5kg |
| External Dimensions | 850mm×750mm×1200mm |
| Weight | 140Kg |
| Power source | Three-wire four-phase 380V±10% 50Hz |
Manual Crock meter is used for testing the fastness to dry or wet rubbing
and the fastness to brushing of all kinds of colored textiles, digital display.
Standards: ISO105-X12, D02, Bs1006 D02, DIN54021, IWS Tm165, JIS K6328. AATCC8/165
Technical Parameter :
Testing times 1-99999
Rubbing travel 104±3mm
Rubbing speed Manual
Rubbing pressure 9N
Rubbing head Roundness :ф 16mm
External Dimensions 620*160* 230mm
Optional Accessories:
AATCC crocking clothes 1Box (1000Pcs)
ISO Grey Scale
AATCC Grey Scale.
The GSM Cutter is for sampling the materials of fabrics and non-fabrics.
The handle is made of aluminum alloy, no broken, Star structure is designed according to the
human touch.
Adopt the high-carbon blade (white); press plate is made of aluminum alloy, not rust, Tight press.
here are 16 stainless steel cross screws on the press plate , make it firm and not slide ,
no rust .
The cutter’s face adopt international advanced T-shaped anti-slip groove structure; minimize the stress in the tangent direction during the cutting and reduce hand fatigue, also ensure that the sample is flat and not slip, a precise cutting .
Adopt the thickness adjustable structure to protect the blade and pad.
It use cork pad, not rubber pad.
Standard: ISO3801, BS2471, ASTM D3776, IWS TM13
Technical Parameter:
Sample area: 100cm2
Max. Cutting thickness: 5mm
External Dimensions: 156×112
Accessories: 2 cutting pads included
4 Extra cutting Blades included (Made in UK)
Use: Suitable for high temperature (or normal temperature) dyeing, washing, dry-cleaning and samples colorfastness test.
Applied Range:
Suitable f or all kinds of yarn and fabric dyeing experiments, especially for N, N/C, T/N and other kinds of knitted and woven cloth, spandex lake, have better levelness and reproducible.
Features:
With internal heating type silicon carbide heat conduction, to avoid the old infrared machine with heat conduction oil as heat carrier inflammable and explosive fatal flaw.
Use stainless steel infrared heater, compared with the external heating infrared glass lamp life long, long time.
Without glycerin, lampblack pollution; Due to the adopted high-power air cooling system, and therefore there is no loss of cooling water;
Heating power is only 1/3 of the traditional oil heat infrared machine, and heat preservation, constant temperature effect is good, save water, electricity, etc Line costs.
Programmable LCD computer installations, a variety of expressions, real time monitor the working state of the curve of the test process and relevant operation.
Adopts frequency conversion control, adjustable rotary speed, better co operate with the scene of the production process works.
To adapt to different kinds of fabric and dyeing processing, the method of general configuration routine for 24 cups of 300ml.
Technical Parameter:
- Number of steel cup: 24
- Dyed cup material: stainless steel 316 l a stretch forming.
- Cup specification: 300 ml.
- Rotational speed: 0-45 rpm
- Operating temperature : room temperature to 14 0 ℃.
- Temperature control precision:±2℃
- Heating rate: 0.5 – 33 ℃ / min (full cup slightly lower, about 3 ℃ / min)
- Cooling: forced air cooling.
- Heat conduction medium: carborundum.
10 . Power specifications: 110V, 60Hz, Single phase
11 . Dimension : 750mm * 7 75mm * 775 mm (long * deep * high).
12 . Machine weight: about 195 kg.
Used for testing the fastness to dry or wet rubbing and the fastness to brushing of all kinds of colored textiles, motorized operation, auto stop when counts reach pre-set counts..
Features:
- Adopt linear slide, running more smooth
- Rubbing head always keep horizontal, no matter thickness of specimen,
no adjust position of rubbing head, easier operation.
- Adopt block pressing method, better clamping specimen.
Standards: ISO105-X12, D02, Bs1006 D02, DIN54021, IWS Tm165, JIS K6328. AATCC8/165
Technical Parameter :
| Testing times | 1-99999 |
| Rubbing travel | 104±3mm |
| Rubbing speed | 60r/min |
| Rubbing pressure | 9N |
| Rubbing head | Roundness :ф 16mm |
| External Dimensions | 600mm×225mm×270mm |
| Weight | 12kgs |
| Power | AC 220V, 50Hz |